ROUND 2..Dr. Feelgood's Official Illuminated Kickplate Thread... Only 12 orders!

[rjdmmfl1]

OK guys, I just purchased enough material to do another 12 orders... but please be advised, i have a couple of local folks who have said they want these also... so if you want them, jump on them now, and do not wait... please read all information regarding these...


LIGHT COLOR OPTIONS

Red, White, or Blue

EXAMPLES











**Disclaimer**

Kickplates consist of Original factory kickplate base, plexiglass, professional utdoor grade vinyl overlays, illiminated tape with power converter, 10 ft of power ground wire, zipties, T-Taps, and a large zip tie for running the wires. Instructions with pictures are included!










Modified by rjdmmfl1 at 2:14 PM 7/1/2008


Modified by rjdmmfl1 at 5:02 PM 7/1/2008


Modified by rjdmmfl1 at 1:29 AM 7/2/2008


Modified by rjdmmfl1 at 9:54 PM 7/17/2008


Modified by rjdmmfl1 at 11:16 PM 7/22/2008

[LongBeachCoupe]

INSANITY!!!!

The font DJ choose makes a bid difference IMHO.. it "pops"

Wheres the O in nismO... non-illuminating/.

[rjdmmfl1]

INSANITY!!!!

The font DJ choose makes a bid difference IMHO.. it "pops"

Wheres the O in nismO... non-illuminating/.

the o lights up, just not as bright.. we did a layer of red transparent vinyl undr the o... not a great replroduction of what it looks light on this picture (also, the little 12 volt battery i used to wire all of these was dying quickly!), but the red will stand out during the day, and be brighter at night!

[l33th41]

DIBS!

Doc I'll send you e-mail and payment when I get out of work tonight!

[NightSky]

Is my name still on the list or do I have to put my name on here? If so, consider it put on. I'll send the kickplates to you and the cash.

[hopetriumphs]

i want a set of these puppies. how do i become one of the 12? pay for it now?

i would send the money now but i'm not sure how much my order will come out to.

i want CF plate supplied by you, since I do not have one, white lighting and either "Altima" or "nismo" lettering. regular shipping is fine.

on a side note. if you stick a few red LED's as opposed to white back there the red will show up much better.

[rjdmmfl1]

i want a set of these puppies. how do i become one of the 12? pay for it now?

i would send the money now but i'm not sure how much my order will come out to.

i want CF plate supplied by you, since I do not have one, white lighting and either "Altima" or "nismo" lettering. regular shipping is fine.

on a side note. if you stick a few red LED's as opposed to white back there the red will show up much better.

regarding payment, no lists, no favorties... its first come first serve! the previous list was just to gauge the interest, since no one sent in a deposit with that list, no one is actually held accountable to purchase (other than being a man of their word)... but I do need folks to follow through with this!

Regarding the lighting, I have a set way of doing these kickplates that allows for maximum lifespan of the lights.. its not something that can easily be altered and I don't use led's, but thank you anyway for the constructive comment!

[hopetriumphs]

so all i have to do is pay and its ordered. excellent! will you please give me a price based on what i want so i can start moving money around and hopefully i can still order later today?

you supply kickplate/CF/White light/"altima" or nismo" lettering.

i wasnt sure if "Altima" was or considered "standard"

also...thanks for not taking it personally.

[l33th41]

Payment and e-mail sent!

[rjdmmfl1]

please

so all i have to do is pay and its ordered. excellent! will you please give me a price based on what i want so i can start moving money around and hopefully i can still order later today?

you supply kickplate/CF/White light/"altima" or nismo" lettering.

i wasnt sure if "Altima" was or considered "standard"

also...thanks for not taking it personally.

regarding price.. please see the list.. from there, you can picj out what you want and send that amount... in the notes section on paypal, be sure to include all relevant information regarding your order, including light color. Thanks!

[NightSky]

If it's a blue light, does that mean it's custom? I read the pricing list and can't tell. I sent a cash place-holder to you since the rest that's transferring from my bank account is going to take 3 to 5 days (what Paypal said). Hope that's ok.

[08altima35]

Dj's customized plates look really good. I can't wait to see mine. Have they shipped or are they still in the works?

[quick_shift]

blue lighting isn't any extra, you can choose whichever you want

[ThatGuyRoger]

Payment sent!

[Summer_In_Brooklyn]

Payment Sent...THANK YOU SOOOOOOOOOO MUCH!!!

[rjdmmfl1]

Dj's customized plates look really good. I can't wait to see mine. Have they shipped or are they still in the works?

check your email...

[hangtime23]

damn...seeing these new pics of the kickplates, I can't wait to get mine! just one more day til my paypal echeck clears, looking forward to getting these!!!

[BlackNWhite]

How much do I need to send you? 190? Since you're not gonna mail them to me?

I want to brushed aluminum with Altima in white. Let me know so I can paypal right now.

[BlackNWhite]

I paypaled you 190. I just wanted to make sure I didn't miss out.

Let me know if I owe you more.

[adidas2go]

Wow Robert! Nice work

[hopetriumphs]

payment sent...woo hoo! talk about impulse buy.

[skilled44]

I know you said the list from the other thread didn't matter, it's purpose was to just measure interest...but I don't get paid until this Thursday then I can send you the full amount thursday morning at 5:00 am eastern time but if that's not good enough and you can't hold a spot open for me until you get some form of payment then I can send you like $20 or $30 now and send the rest Thursday morning...let me know asap...thanks...don't wanna miss out on my chance

[skilled44]

Also to add to my last post can we pick the font for our custom text and what address should we ship our kick plates to...let me know, thanks

[rjdmmfl1]

Also to add to my last post can we pick the font for our custom text and what address should we ship our kick plates to...let me know, thanks

custom include any font you would like, let me know in the paypal notes...

also, please do not send deposit, just send me the entire amount this Thursday!

see 1st post for mailling address!

[LongBeachCoupe]

"Ebony and Ivory" living in perfect harmony!

Robert TCOB!

[maxentropy]

INSANITY!!!!
The font DJ choose makes a bid difference IMHO.. it "pops"

Rob chose the font for me, and it couldn't have been anymore perfect!

Hey Rob, if you aren't using LED's in these, what are you using? Any concern with these getting hot after time and if the light goes out we can replace em?

Can't wait to install these-- they look friggen pimp!

[quick_shift]

Rob chose the font for me, and it couldn't have been anymore perfect!

Hey Rob, if you aren't using LED's in these, what are you using? Any concern with these getting hot after time and if the light goes out we can replace em?

Can't wait to install these-- they look friggen pimp!

its like a glow tape, i forget what it is called

[rjdmmfl1]

Rob chose the font for me, and it couldn't have been anymore perfect!

Hey Rob, if you aren't using LED's in these, what are you using? Any concern with these getting hot after time and if the light goes out we can replace em?

Can't wait to install these-- they look friggen pimp!

its called light tape, el tape, etc. It has a lifespan of about 10,000 hours.. the power inverter has a lifespan of maybe 2000 - 3000 hours.... you should never have to replace the el tape, but maybe, in 5-6 years, you may have to replace the Power inverter.. and those are standard and only cost about $7

I had to replace the power inverter on my El glo speedometer / gauge kit on my old car after a couple of years.. but that power inverter was used all the time when driving to power the gauges, the way the kickplates are wire, they will ONLY come on when the door is open, so they should last MUCH longer

[SHIFT_COUPE]

Robert is like a woman, he gets you all hot and bothered about something and then he says he's not going to do it anymore.....then BAM! He smartens up

...wait...that came out wrong...

[Serkle K]

Did he just say that?!? WOW!

I think that's a new sig quote right there

[windex]

Hey robert just wondering if you have received my kickplates already...

[razah9]

PAID!!!

[rjdmmfl1]

Hey robert just wondering if you have received my kickplates already...

yes, working on them tonight

[LongBeachCoupe]

Doc i sent you my kickplates with $360 cash. You got it right?

hehhe

[BlackNWhite]

Hey Rob, I'm showing my brother(the one that went with me to Stillen) the pics and he's really interested in some of these for his FX.

He has kickplates for his and would like them to illuminate as well. He wants to know how much you would charge him. He has kick plates in the front and back... but the back ones are really small. Let me know, thanks.

Also, you haven't responded to my e-mail or voicemail I left you. Let me know if I need to send you some extra cash.

[rjdmmfl1]

OK, guys , I can be a nice guy, until you waste my time... if you are not sure you want these, DO NOT PLACE THE ORDER. I have issued one refund and will NOT be issuing anymore, so if you send the money from this point on, expect to receive your kickplates...

again.... DO NOT WASTE MY TIME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Daniel, this was not directed towards you (but you already know that)

[windex]

Thanks again man. I know one of my plates were dirty... Sorry bout that I took em off at the post office.

[hopetriumphs]

Rob i had sent you an e-mail on Tuesday after i had sent payment. i'll just ask my question one more time. because i do not want to delay the order.

are the aluminum kckplates you use the same as the ones on the nissan website?

i wanted to change my order from carbon fiber to aluminum but if you wanted to i could place my order on nissanparts.com and have them shipped to you. i lik the lines from the OEM ones and i cant see them in the pictures you have up here but it could be the angle i'm looing at it from.

let me know. thanks.




Modified by hopetriumphs at 9:36 AM 7/3/2008

[ThatGuyRoger]

kickplates sent should be there on tues

[rjdmmfl1]

Rob i had sent you an e-mail on Tuesday after i had sent payment. i'll just ask my question one more time. because i do not want to delay the order.

are the aluminum kckplates you use the same as the ones on the nissan website?

i wanted to change my order from carbon fiber to aluminum but if you wanted to i could place my order on nissanparts.com and have them shipped to you. i lik the lines from the OEM ones and i cant see them in the pictures you have up here but it could be the angle i'm looing at it from.

let me know. thanks.


Modified by hopetriumphs at 9:36 AM 7/3/2008

sorry, i've been swamped...

yes, these kickplates are the oem ones, I remove the alumnium piece, and replace it with clear plexiglass, with either a carbon fiber overlay or bshed aluminum overlay..

I can't do the OEM lines... sorry


also, you asked for carbon fiber, so you still owe me another $15 ($235 total for carbon fiber, Altima)

Folks, please, in the future , do not change your orders, it takes too much time to go back and change orders with the print shop...