WTT: 180SX Quarter Panel Glass for CA Parts

[HighwayStar22]

****UPDATE I've moved the price on the glass. $140 cause I just want it gone, but I'm not going lower than that. I'll keep them if they don't sell for that. Also posted pics of the J30 axles I have and a description and pric further down. Thank you again****

Hey guys. I'm fairly new here. There are a few things I need to get my car running.

I have a set of 180SX quarter panel glass pieces that I'm offering up for potential trade. I've sourced a lot of parts I'm buying already so the list is short, but I know I will come up with some more. Here are the pics of the glass. I planned on selling them for $200 so that will give you an idea of what they're worth. No one really has them anymore. The passenger seal comes with them. It is mint. The dirver's side seal I have misplaced so when you remove your drivers side window you'll need to play nice with the seal.

I also have all the other bits in the pics for trade too. S13 DCC with the temp sensor and main relay {GONE} . Carbon fibre manual fuel pressure {GONE} and an a/f gauge {GONE}. Sparco harness {GONE}, and a stock window wiper motor.



What I need.

1. ENGINE HARNESS2. Dropping resistor DONE3. Ignitor DONE4. SS T25 oil feed lines5. Manifold tubular style.6. Clutch

I'm sure I might think of more. Best way to reach me is via aim: limitbreak22, or email at limitbreak22 [at] tmail {dot} com That goes right to my phone and I will get back to you promptly. Thank you.

Modified by HighwayStar22 at 1:35 PM 8/7/2008
Modified by HighwayStar22 at 12:06 AM 8/15/2008

[sjbsuperman1425]

Ignitor for Air/Fuel Gauge?

[DALAZ_68]

i have an ignitor aswell if u need it..

[HighwayStar22]

Fuel pressure is gone for an ignitor.

DCC is gone as well.

Come on guys I know someone has a spare harness they wanna trade for some sweet 180sx goodness.

[Rin5]

of those listed...what can i get for DSM resistor uncut

[HighwayStar22]

of those listed...what can i get for DSM resistor uncut

Sparco Harness or A/F Gauge. the wiper motor isn't worth what the DSM resistor is. The DCC and FP Gauge are already gone.

[Rin5]

Sparco Harness or A/F Gauge. the wiper motor isn't worth what the DSM resistor is. The DCC and FP Gauge are already gone.

quick question though...can i see a picture of how the A/F hooks up?

[email protected] is my email

[HighwayStar22]

quick question though...can i see a picture of how the A/F hooks up?

[email protected] is my email

I don't have any pics, but here's the basics:

If there are 3 wires (black,purple,red or white).Black is groundpurple is 02 signalred or white is 12v power on ignition switch.

They're really simple to hook up.

[Rin5]

aiight im down... ResBox <==> CF A/F Meter

how should we go about the trade?

[wingFeather]

Interested in the Sparco harness. I don't have much to trade, though. Cash?

[HighwayStar22]

aiight im down... ResBox <==> CF A/F Meter

how should we go about the trade?

Send me your information to my email address in the first post. I'll reply back with my shipping address. I'll send it out tomorrow via usps priority mail and send you the tracking number. We both pay for our own shipping, that's the best way to do it. I have two packages to send tomorrow so it will go out then.

[HighwayStar22]

Interested in the Sparco harness. I don't have much to trade, though. Cash?

Email sent.

[HighwayStar22]

I also forgot I have a set of J30 axles. 5 bolt version. I bought these from a guy off zilvia for 85 plus shipping. I took them to a local shop here in jacksonville. I had them inspected, the joints and rear cups cleaned, repacked, regreased, new boots, and clamps. so they are in fantastic shapes. I have those for trade or sale as well. The service on the axles was almost 100 for that.

[wingFeather]

Email sent.

Payment sent!!! Thanks I will put these to good use.

[Rin5]

I also forgot I have a set of J30 axles. 5 bolt version. I bought these from a guy off zilvia for 85 plus shipping. I took them to a local shop here in jacksonville. I had them inspected, the joints and rear cups cleaned, repacked, regreased, new boots, and clamps. so they are in fantastic shapes. I have those for trade or sale as well. The service on the axles was almost 100 for that.

how much shipped to 19901?

[HighwayStar22]

how much shipped to 19901?

I sent you an email. Your gauge went out today too.

[Rin5]

Box sent too!

[HighwayStar22]

I had these cleaned, inspected, repacked with grease, new boots, and new clamps by a local drive line shop. That cost $80 for that service, the halfshafts were $90 when I bought them. Pics of J30s -$150 shipped

[trevr]

I have used clutch if your interested.



It is also listed on ebay

http://cgi.ebay.com/ebaymotors...&rd=1