Wiring Specialties - Pre-Made wiring harnesses, Brand NEW!

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
User avatar
Wiring Specialties
Vendor
Posts: 494
Joined: Mon Apr 11, 2005 5:04 pm

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby Wiring Specialties » Fri Oct 29, 2010 12:17 am

Guys/Gals,

We are pushing forward with the CA18 development into the S13 chassis. Any thoughts?
We have not gotten too much action with this idea, so i wanted to hear some ideas to better understand the QTY we should make.

Almost all of the CA18 harnesses we see at the shop are in terrible shape, so replacing one with a new set make sense, but need more feedback.

Thanks
Yury Lyalko
www.WiringSpecialties.com


User avatar
CRyan
Posts: 1403
Joined: Tue Dec 21, 2004 6:53 pm
Car: 1997 Nissan 240SX

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby CRyan » Fri Nov 05, 2010 1:05 pm

S14 to S14 SR engine harness YET?!?!?!

Engine is coming out at some point this winter and I already know this would be an amazing addition to my "clean up" detail!

User avatar
Wiring Specialties
Vendor
Posts: 494
Joined: Mon Apr 11, 2005 5:04 pm

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby Wiring Specialties » Sun Nov 07, 2010 10:44 pm

Yep, got the S14 to S14 done, but the only 2 final prototypes are sold to local customers. The main order will be done later this year though. Sorry... It will be worth the wait though, just like the other units we got.

Thanks
Yury

youngfab59
Posts: 3
Joined: Wed Jan 27, 2010 3:54 pm
Contact:

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby youngfab59 » Tue May 03, 2011 12:01 am

Are these pre-made harnesses still being made? I'm looking for a S14 Kouki SR to S14 harness.

User avatar
Wiring Specialties
Vendor
Posts: 494
Joined: Mon Apr 11, 2005 5:04 pm

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby Wiring Specialties » Fri May 20, 2011 1:07 pm

Absolutely! We are actually moving towards all pre-made harnesses. We have S14 Sr to S14 pre-made harnesses on route right now that will be available in June. They are almost all sold out thought on pre-orders so if you are interested let us know quick.

You can email us at [email protected] for pre-order info.

soldi3rappl3
Posts: 33
Joined: Sat Aug 25, 2007 7:26 pm

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby soldi3rappl3 » Tue Sep 20, 2011 9:56 am

shipping was fast! ordered it yesterday and got here today! did not try to hook everything up yet though.

User avatar
Wiring Specialties
Vendor
Posts: 494
Joined: Mon Apr 11, 2005 5:04 pm

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby Wiring Specialties » Mon Sep 26, 2011 7:20 pm

Glad to hear it got to you so quick. Hope you enjoy it and if you have any questions, please do not hesitate to call or email us.

User avatar
PyR0NiAk
Posts: 4447
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby PyR0NiAk » Fri Sep 30, 2011 5:05 pm

Ordered my new COMPLETE set (only had an upper, previously) this morning. It'd be awesome if it shows up as quickly as soldi's did. If so, I'll have it installed tomorrow with some fresh pics.

User avatar
Wiring Specialties
Vendor
Posts: 494
Joined: Mon Apr 11, 2005 5:04 pm

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby Wiring Specialties » Sun Oct 02, 2011 3:14 pm

Should arrive any day now. Soldi's quick arrival was a surprise to us even.
We would love to see some pictures when you install it!

User avatar
PyR0NiAk
Posts: 4447
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby PyR0NiAk » Sun Oct 16, 2011 12:32 pm

Wiring Specialties wrote:Should arrive any day now. Soldi's quick arrival was a surprise to us even.
We would love to see some pictures when you install it!
Got them installed. I extended the injector wires when I put the deatschwerks plugs on them so I could run them from under the manifold. The only complaint I have was the fact that the wrong plug was on the battery cable on the transmission harness. (The red one where 2 connectors hook up.) It's a bolt on connector, so I swapped it with the one from my stock transmission harness. Otherwise, it looks great. Has everything to hook up for any situation. (Automatic to manual swap, Automatic tps or manual tps, z32 or stock mafs, and dash connectors for pignose or chuki.) All in all, I like it and definitely recommend them to anyone.

slydewayz11
Posts: 10
Joined: Sun Oct 16, 2011 12:34 am
Car: 1989 240 sx hatch

1995 s-14

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby slydewayz11 » Sun Oct 16, 2011 10:15 pm

hey rayu

iam needing an s-13 sr20det harness into s-13 chassis , iam about to order it from you but i have some questons.
i need to add the safc2 neo wire to it and iam going to see if you could wire it for a boost controller to hit me up

User avatar
PyR0NiAk
Posts: 4447
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby PyR0NiAk » Mon Oct 17, 2011 5:04 am

The boost controller would be wired separately. Its pretty simple. You need a constant 12v source, a switched 12v source, and a ground.

slydewayz11
Posts: 10
Joined: Sun Oct 16, 2011 12:34 am
Car: 1989 240 sx hatch

1995 s-14

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby slydewayz11 » Tue Oct 18, 2011 1:44 am

PyR0NiAk wrote:The boost controller would be wired separately. Its pretty simple. You need a constant 12v source, a switched 12v source, and a ground.


ok thanks man

sr929
Posts: 1
Joined: Sat Oct 06, 2012 2:23 am
Car: s14 sr20det in 82 mazda 929

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby sr929 » Sat Oct 06, 2012 2:29 am

hey there are these looms still being made i'm in new zealand very interested in a s14 loom but i,ve put the motor in to a mazda can you help maybe get one of your datsun looms to fit

User avatar
Wiring Specialties
Vendor
Posts: 494
Joined: Mon Apr 11, 2005 5:04 pm

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby Wiring Specialties » Fri Oct 19, 2012 7:44 pm

Send us an email at [email protected]

User avatar
AZhitman
Administrator
Posts: 71011
Joined: Mon Apr 29, 2002 2:04 am
Car: 58 L210, 70 240Z, 75 240Z RB25, 63 Bluebird RHD, 63 NL320, 67 WRL411, 67 SPL311, 68 510 SR, 77 620 SR20, 79 210, 92 SE-R, 97 D21, 98 S14, 12 Titan 4x4.
Location: Surprise, Arizona
Contact:

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby AZhitman » Sat Oct 20, 2012 10:24 pm

I just received a harness for a car I'll be helping a buddy build.... SR swap into a Datsun 510.

This harness is SO damn sweet... looks totally factory. Can't wait to start installing it - this is gonna save us a TON of time. :)

DET240SX
Posts: 15
Joined: Wed Aug 31, 2011 9:15 am
Car: 92 Hatchback S14 SR20DET, 89 Coupe SOHC KA24e(soon to be 1UZ), 01' 330CI
Location: MI

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby DET240SX » Tue May 07, 2013 6:13 pm

I'm about to order my S14 SR into S13 tomorrow :biggrin:

User avatar
MorrenCraige
Posts: 11
Joined: Tue Jun 04, 2013 10:16 am
Car: BMW 7
Contact:

Re: Wiring Specialties - Pre-Made wiring harnesses, Brand NE

Postby MorrenCraige » Sun Mar 09, 2014 8:34 am

Awesome. I just want to drive my car home to the family reunion in the beginning of this summer.


Return to “SR20DET Forum (rear-drive)”