Wiring Specialties - Pre-Made wiring harnesses. Brand NEW. Turn Key install.

General discussion forum about the 240sx, and a great place to introduce yourself to the board!
User avatar
OM3GA
Posts: 3041
Joined: Fri Apr 14, 2006 11:41 pm
Car: A Sexy Mobile, 1993 Nissan 240sx 180sx Hatcher

Post

REDWINTERZ wrote:This is going to be a long shot, but do you ever have plans of expanding into the Z chassis? I'm doing an engine rebuild and will be needing a wiring harness for a Z32. And I know Z people would jump at the chance for cheap, reliable harnesses! Thanks!
Depending on the amount of interest raised up i guess will be the judge. If there are a lot of people that show interest maybe well do something but it would definitely take some time.


User avatar
Wiring Specialties
Vendor
Posts: 494
Joined: Mon Apr 11, 2005 5:04 pm

Post

We have gotten a bit of interest from the Z32 crowd. I think its is a good idea to make a few harnesses for the VG30DETT. We have only worked on a few Z cars in the past, so a bit of research would need to be done. We'll tackle this after the SR/RB harnesses are done.

Thanks for the headsup.

Also, the RB20 and RB25 harnesses are in final stages of development and we are expecting the prototypes to arrive before July 20th. Production is next. More to come.

User avatar
srraptor
Posts: 70
Joined: Sun Jul 11, 2010 12:00 am
Car: 1995 Nissan 240sx
1996 nissan 240sx sr swap coming soon
1998 nissan altima gle
*totaled* 1989 nissan 240sx

Post

any idea how long till the s14 sr> s14?

fleali88
Posts: 126
Joined: Wed Jun 03, 2009 12:29 pm
Car: 97 240sx, s14 sr20det swap in the works

Post

srraptor wrote:any idea how long till the s14 sr> s14?
+1 ?

User avatar
Wiring Specialties
Vendor
Posts: 494
Joined: Mon Apr 11, 2005 5:04 pm

Post

S14 to S14 should be done in about 8-10 weeks.
We'll keep everyone posted.

s14tan
Posts: 4253
Joined: Sun Jun 17, 2007 4:55 pm
Car: 95 ZenKi SE w/ S14 SR GT28r and bolt ons
Contact:

Post

Wiring Specialties wrote:S14 to S14 should be done in about 8-10 weeks.
We'll keep everyone posted.
YES!!

User avatar
HasakiS14-5
Posts: 52
Joined: Sat Jul 21, 2007 3:08 pm
Car: 06 G35 Coupe

Post

Awesome, this is some great news for all of us. This might sound strange but is there any plans for a new wiring harness for KA24DE with Turbo upgrade ?!! I really want to keep my factory engine while slapping a turbo on it, since my existing harness have seen better days, it would help out a lot if there was a new wiring harness for a turbo conversion.

User avatar
PyR0NiAk
Posts: 4447
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

The wiring is no different when using a turbo, so all you would need is for them to sell a replacement harness for your stock one..

User avatar
Lonismos14
Posts: 1351
Joined: Fri Sep 18, 2009 5:35 am
Car: 1995 Nissan 240sx, 1999 Chevy Hoe, 1996 Saturn Sl2

Post

Hey david i need rb20 s14 harness how long and how much? Thanx

User avatar
HasakiS14-5
Posts: 52
Joined: Sat Jul 21, 2007 3:08 pm
Car: 06 G35 Coupe

Post

PyR0NiAk wrote:The wiring is no different when using a turbo, so all you would need is for them to sell a replacement harness for your stock one..
Yes you are right, I believe getting a replacement from the factory will cost more than getting one from them if they ever provided one.

User avatar
Wiring Specialties
Vendor
Posts: 494
Joined: Mon Apr 11, 2005 5:04 pm

Post

The KA OEM replacement harnesses have not been developed yet. There has been a bit of interest in that, so one the SR units are done, we'll do up a few KA replacement units. Not sure on the pricing yet, but my sense is that they will be in-line with the SR units.

Thanks
Yury

p.s. S14 RB20 should be ready soon. Just waiting for these beautiful OEM ECU plugs.

User avatar
Lonismos14
Posts: 1351
Joined: Fri Sep 18, 2009 5:35 am
Car: 1995 Nissan 240sx, 1999 Chevy Hoe, 1996 Saturn Sl2

Post

Thanx yury. :bigthumb: i will be waiting. :frown:

User avatar
StricNyne
Posts: 3729
Joined: Thu Oct 30, 2003 1:11 pm

Post

i am looking foward to s14 harness for series 2 rb25 sooo bad when will prepurchase be available ?

User avatar
OM3GA
Posts: 3041
Joined: Fri Apr 14, 2006 11:41 pm
Car: A Sexy Mobile, 1993 Nissan 240sx 180sx Hatcher

Post

Hopefully soon, just stay posted :) I think the KA harnesses are a good idea as well, swap harnesses shall come first since those are not available brand new anywhere else.

Stay tuned everyone. :woot:

User avatar
Lonismos14
Posts: 1351
Joined: Fri Sep 18, 2009 5:35 am
Car: 1995 Nissan 240sx, 1999 Chevy Hoe, 1996 Saturn Sl2

Post

I cant stay tuned i need mine in about two weeks are they going to be ready or what? If it will be faster i will just send you'll my old harness and have you convert it then when your finish you can ship me a new one.

User avatar
ska69
Posts: 360
Joined: Tue Nov 17, 2009 11:36 am
Car: 200sx s13 ca18det
Location: Disney Land

Post

Hi,

any plug-n-play ca18det harnesses available?

also looking for a new chassis harness...can you help me out with that as well?

Thanks

User avatar
OM3GA
Posts: 3041
Joined: Fri Apr 14, 2006 11:41 pm
Car: A Sexy Mobile, 1993 Nissan 240sx 180sx Hatcher

Post

The CA harness currently is not being produced. If enough interest is raised it may go into production. I don't see why not if the CA market stays popular or grows a little. For a Chassis harness i would probably contact Ray at The nismo shop. Or go to pick n pull. :D

User avatar
OM3GA
Posts: 3041
Joined: Fri Apr 14, 2006 11:41 pm
Car: A Sexy Mobile, 1993 Nissan 240sx 180sx Hatcher

Post

Lonismos14 wrote:I cant stay tuned i need mine in about two weeks are they going to be ready or what? If it will be faster i will just send you'll my old harness and have you convert it then when your finish you can ship me a new one.
It would definitely be faster to have you send in your old harness to get modified and repaired.

User avatar
Wiring Specialties
Vendor
Posts: 494
Joined: Mon Apr 11, 2005 5:04 pm

Post

Bump
The following pre-made harnesses are in stock now.

S13 SR to S13/S14 engine swap harness.
We also have many transmission pre-made harnesses available now including...
- S13 SR20DET to S13/S14 240sx
- S14 SR20DET to S13/S14 240sx
- RB20DET to S13/S14 240sx
- CA18DET to S13/S14 240sx

User avatar
GrilledCheese33
Posts: 4819
Joined: Mon Apr 04, 2005 3:29 pm
Car: 2008 Xterra, 1972 Yamaha R5, 2017 Sea Doo Spark Trixx
Location: 386 FL

Post

Dumb question:

Would any of your transmission harnesses work on my 5 speed swap still with the KA? I am having a horrid time finding a tranny harness to put the finishing touches on my recent 5 speed swap.

User avatar
srraptor
Posts: 70
Joined: Sun Jul 11, 2010 12:00 am
Car: 1995 Nissan 240sx
1996 nissan 240sx sr swap coming soon
1998 nissan altima gle
*totaled* 1989 nissan 240sx

Post

Any news on s14sr zenki into s14?

User avatar
Wiring Specialties
Vendor
Posts: 494
Joined: Mon Apr 11, 2005 5:04 pm

Post

Unfortunately, the Wiring Specialties conversion SR and RR harnesses will not work with the KA. The SR lacks the secondary O2, Crank position sensor and the 5th gear position switch. Sorry.

srraptor - the S14 to S14 units have been designed and now we are awaiting final prototypes. We should be able start the pre-order sales this Month.

Thanks for the interest guys,
Yury

User avatar
hybrid_flyer
Posts: 790
Joined: Thu Jun 17, 2004 12:51 pm
Car: 95 240sx SE wrecked....89 240 coupe now

Post

any updates on the KA harness??? Would really like to replace the SOHC KA harness

User avatar
Wiring Specialties
Vendor
Posts: 494
Joined: Mon Apr 11, 2005 5:04 pm

Post

Finally, big news.
We got all the details lined up for the production of the RB20 and RB25 to S13 harnesses.
Delivery date is set for late November.

Here are the links to the pre-order page: http://wiringspecialties.com/wsrehasrandr.html

Picture of the RB25DET into S13 harness. More pictures on the site
Image

Thanks for all the support guys.

Yury Lyalko
Wiring Specialties

User avatar
Chris28
Posts: 3159
Joined: Sat Jul 14, 2007 11:18 am
Car: 92 s13 KA-T
Location: 757/919
Contact:

Post

Are you selling the s13 MAFS to z32 MAFS conversion harness? I don't need one now, but I'd love to scoop one up when I get a new tune.

User avatar
upsdude
Posts: 56
Joined: Wed Sep 30, 2009 6:18 pm
Car: '95 zenki

Post

are you guys working on an s15 to s14 sr harness?

jdm2191
Posts: 128
Joined: Sun Nov 02, 2008 12:59 pm
Car: S13 Coupe
Location: SoCal Moreno Valley

Post

Any IJZ-GTE Harness for a s13?

User avatar
Wiring Specialties
Vendor
Posts: 494
Joined: Mon Apr 11, 2005 5:04 pm

Post

Chris - we have the Z32 MAFS connectors in stock. They do come with a connector to connect to the main harness, but the OEM SR harness does not have a swappable connector. So, we can supply yo with both ends and this way you can run either of the connectors and switch when you get the tune.

Just email us at [email protected] and we'll explain what needs to be done and provide a wiring diagram.

upsdude - sorry, the S15 swaps are too rare to make a whole new production harness for it. However, if you have the engine harness, we can do a nice wiring conversion for you. Most S15 SR harnesses are new enough, so they are in good shape.

JDM2191 - sorry no J harnesses yet.

Thanks
Yury Lyalko
www.WiringSpecialties.com

User avatar
upsdude
Posts: 56
Joined: Wed Sep 30, 2009 6:18 pm
Car: '95 zenki

Post

were you guys still working on the s14 to s14 harness? still deciding on which sr to get

User avatar
Wiring Specialties
Vendor
Posts: 494
Joined: Mon Apr 11, 2005 5:04 pm

Post

The S14 to S14 will be done this year. Compared to the other harnesses its a fairly 'simple' development and we have the connectors in place.

We'll keep everyone posted.
Our goal is to have the S13 and S14 chassis/engine/trans compbos covered before end of the year.

Thanks
Yury Lyalko
www.WiringSpecialties.com


Return to “240sx General Discussion”