Wiring Specialties - Pre-Made wiring harnesses. Brand NEW. Turn Key install.

General discussion forum about the 240sx, and a great place to introduce yourself to the board!
User avatar
TheRealNap0le0n
Posts: 688
Joined: Wed May 06, 2009 5:21 pm
Car: 1998 q45
Location: Saint Cloud, FL
Contact:

Post

TheRealNap0le0n wrote:
OM3GA wrote:Awesome, glad to hear you ordered one!

Keep the orders going guys!

These are great products!
i would order the premade RB25 into S13 if it was available
Get one when they are available, it will definitely be worth it!

ill order one as soon as i get paid then! because the harness i got with my RB25 is wired for an S14 and for an N62 maf and when i was looking the harness over i just dont like what i see... alot of electrical tape and what not...

is it possible to order the standalone harness set up with an N62 maf already. If not its not a big deal for me to pull the N62 pigtail off my other harness.


User avatar
Dittoz7
Posts: 17695
Joined: Thu Sep 07, 2006 4:08 pm
Car: 1997 2f0WtY SE!
Location: Miami, FL

Post

Ummm till no S14-SR into S14?

User avatar
OM3GA
Posts: 3041
Joined: Fri Apr 14, 2006 11:41 pm
Car: A Sexy Mobile, 1993 Nissan 240sx 180sx Hatcher

Post

TheRealNap0le0n wrote:
OM3GA wrote:Awesome, glad to hear you ordered one!

Keep the orders going guys!

These are great products!
i would order the premade RB25 into S13 if it was available
Get one when they are available, it will definitely be worth it!

ill order one as soon as i get paid then! because the harness i got with my RB25 is wired for an S14 and for an N62 maf and when i was looking the harness over i just dont like what i see... alot of electrical tape and what not...

is it possible to order the standalone harness set up with an N62 maf already. If not its not a big deal for me to pull the N62 pigtail off my other harness.[/quote]

The MAF plug is no problem.
Dittoz7 wrote:Ummm till no S14-SR into S14?
They will be here just stay tuned. :)

User avatar
TheRealNap0le0n
Posts: 688
Joined: Wed May 06, 2009 5:21 pm
Car: 1998 q45
Location: Saint Cloud, FL
Contact:

Post

woot i'll be ordering in 2 weeks or so... dont want to 0 out my bank account

User avatar
Wiring Specialties
Vendor
Posts: 494
Joined: Mon Apr 11, 2005 5:04 pm

Post

Guys, thanks for all the feedback.
To keep all posted - we are finalizing the S13 to S13 units as we speak and started the pre-orders offering.

On deck is the RB25DET into S13, then RB20DET into S13 and S14 SR into S14 240sx.

Lots of options to have to work through, but they are all coming.

However, so far, the pre-made harnesses have been received great and have worked even better, so we are very happy with the feedback.

More to come.

User avatar
OM3GA
Posts: 3041
Joined: Fri Apr 14, 2006 11:41 pm
Car: A Sexy Mobile, 1993 Nissan 240sx 180sx Hatcher

Post

:dance

User avatar
StricNyne
Posts: 3729
Joined: Thu Oct 30, 2003 1:11 pm

Post

if i needed modifications would you be able to do that

tvos13
Posts: 4
Joined: Thu Apr 29, 2010 7:16 pm
Car: s13

Post

How long until s13 sr20det into s13 chassis premade harnesses ship out?

User avatar
OM3GA
Posts: 3041
Joined: Fri Apr 14, 2006 11:41 pm
Car: A Sexy Mobile, 1993 Nissan 240sx 180sx Hatcher

Post

StricNyne wrote:if i needed modifications would you be able to do that
Most likely yes, what kind of modifications did you have in mind? Injector plugs? MAF plugs? Let me know.
tvos13 wrote:How long until s13 sr20det into s13 chassis premade harnesses ship out?
They are going to be shipping at the end of this month!! :dance

User avatar
StricNyne
Posts: 3729
Joined: Thu Oct 30, 2003 1:11 pm

Post

rb25det series 2 harness, with resistor and rb26 injector plugs. no need for maf, or 02 plugs

xkrisx
Posts: 103
Joined: Fri Jun 30, 2006 8:57 am
Car: 1991 Nissan 240sx
Location: Rocklin, CA
Contact:

Post

Do you have any future plans to make a 2JZ-GTE into a S13?

User avatar
Chaotic_Warlord
Posts: 4805
Joined: Fri Feb 18, 2005 8:31 am
Car: Black 5 speed Swapped 1995 240sx
Location: Killadelphia PA
Contact:

Post

Does anyone make straight up full replacement harnesses for the KA? mine is old and battered and since I did the 5 speed swap a couple of years ago I'd like to finally replace the existing harness with a brand new full harness so I can hide it and clean up my engine bay and actually get the ECU hooked up so my check engine light will go away.

User avatar
NismoS13Ks
Posts: 142
Joined: Fri Oct 09, 2009 7:10 pm
Car: 93' 240sx SE

Post

great timing for me! Will be buying! Takes a load of stress off

User avatar
OM3GA
Posts: 3041
Joined: Fri Apr 14, 2006 11:41 pm
Car: A Sexy Mobile, 1993 Nissan 240sx 180sx Hatcher

Post

Let me know when you need one bud.

[email protected]

-David

User avatar
OM3GA
Posts: 3041
Joined: Fri Apr 14, 2006 11:41 pm
Car: A Sexy Mobile, 1993 Nissan 240sx 180sx Hatcher

Post

Guys and Gals,

This is as an update to the pre-order of the Wiring Specialties S13 to S13 harness that was placed over the last few weeks.
We understand that the delays we encountered with shipping our product from the factory and getting the harnesses to everyone has been a frustrating inconvenience and we greatly appreciate your patience through this.

We finally received confirmation on the container shipping from our freight forwarders and are happy to report that the shipment is due to arrive in NYC right around the 4th of July holiday. Clearing customs should take a few days and then we will be very busy shipping the product out to everyone.

I want to also reassure everyone that as soon as the harnesses arrive at our shop after clearing customs, we will be rushing all the pre-order items out as soon as physically possible.

Again, thank you for the patience in waiting for our harnesses and again, our apologies for the delays.

Thanks,

Wiring Specialties
508.274.0464

User avatar
StricNyne
Posts: 3729
Joined: Thu Oct 30, 2003 1:11 pm

Post

what about rb25 series 2 into s14

User avatar
White Comet
Posts: 19033
Joined: Thu Jun 15, 2006 7:22 am
Car: fc, s13 and mazda6, Sierra
Location: lancaster, pa

Post

hey david, not sure if you got it, but i responded to your email. get back to me and we'll get the ball rolling

User avatar
White Comet
Posts: 19033
Joined: Thu Jun 15, 2006 7:22 am
Car: fc, s13 and mazda6, Sierra
Location: lancaster, pa

Post

swing and a miss

User avatar
OM3GA
Posts: 3041
Joined: Fri Apr 14, 2006 11:41 pm
Car: A Sexy Mobile, 1993 Nissan 240sx 180sx Hatcher

Post

White Comet wrote:hey david, not sure if you got it, but i responded to your email. get back to me and we'll get the ball rolling
Let me check, i havent seen a response come in. Shoot me another email when you get a chance.

User avatar
StricNyne
Posts: 3729
Joined: Thu Oct 30, 2003 1:11 pm

Post

what about me ? how do i preorder rb harness ?

band1t85
Posts: 22
Joined: Mon Mar 08, 2010 4:29 pm
Car: 96 240sx w/rb25
Location: SE Minnesota

Post

ok so let me get this strait.. you make brand new harnesses? So I could just get rid of my old harness? Can I send you mine to have cleaned up? My car starts, runs and drives.. all that good stuff but it's kinda janky and none of the tuning shops in my area will tune my car till i get it fixed. Have a 96 s14 w/rb25det swap. Any help here would be fantastic

Thank Alot

User avatar
CRyan
Posts: 1403
Joined: Tue Dec 21, 2004 6:53 pm
Car: 1997 Nissan 240SX

Post

Hey Yury, this is Corey - I got a new email address due to TOO MUCH SPAM on the other one. It is [email protected].

Is there a possibility I could get on a list for the S14A SR to S14 chassis when they become readily available? Thanks! I'm really excited about a harness without the 2 foot of clutter on the passenger side of the firewall!

User avatar
PyR0NiAk
Posts: 4447
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

QUICK UPDATE!! I received my harness and it's now installed. It seems the used Z32 maf I purchased from a private person is bad. The car starts at the crack of a key with the maf sensor unplugged. The harness is amazingly clean and extremely flexible so it is easy to tuck and make look nice. I'll give another update once I get the new MAF, because I've checked my ECU for burns and there are none, and I'm pretty sure the wiring isn't the issue, so it comes down to the MAF. These harnesses are AWESOME!! :dblthumb:

User avatar
OM3GA
Posts: 3041
Joined: Fri Apr 14, 2006 11:41 pm
Car: A Sexy Mobile, 1993 Nissan 240sx 180sx Hatcher

Post

I told you bud, thanks for the quick review. I am glad you are fully satisfied. I cannot wait to see your review with pictures :D

User avatar
brizanden
Posts: 6064
Joined: Mon Apr 30, 2007 8:04 am
Car: thrased kouki ftw
Contact:

Post

i would like to say bad a** i will be coming to you guys when im done with my rb cause god i hate wires. i had issues making a dual cam work in a single cam car lol.

User avatar
PyR0NiAk
Posts: 4447
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

OM3GA wrote:I told you bud, thanks for the quick review. I am glad you are fully satisfied. I cannot wait to see your review with pictures :D
Most of the pictures already exist, but I'm waiting to take one final one after I get the car running so I can take it to the car wash and scrub the damn thing. After I get that done, I'll post up my full review with pics in a separate thread.

User avatar
CRyan
Posts: 1403
Joined: Tue Dec 21, 2004 6:53 pm
Car: 1997 Nissan 240SX

Post

don't do that - then your dirty engine will bring out the NEW HARNESS!! Come on, photography 101. gah. haha (i'm kidding, of course)

User avatar
OM3GA
Posts: 3041
Joined: Fri Apr 14, 2006 11:41 pm
Car: A Sexy Mobile, 1993 Nissan 240sx 180sx Hatcher

Post

lol.

Fastazz240
Posts: 189
Joined: Sun Apr 25, 2010 10:40 am
Car: 1995 240 SX, 93 Vert, 95 Hardbody 4X4

Post

So any new updates as far as which harnesses are available, considering the site does not update that often? Still looking for the RB 25 into a S14.

User avatar
REDWINTERZ
Posts: 1119
Joined: Wed Aug 19, 2009 6:42 am
Car: 1994 Nissan 300ZX (Aztec Red with Black Leather)

Post

This is going to be a long shot, but do you ever have plans of expanding into the Z chassis? I'm doing an engine rebuild and will be needing a wiring harness for a Z32. And I know Z people would jump at the chance for cheap, reliable harnesses! Thanks!


Return to “240sx General Discussion”