wipers broken?

Nissan 300ZX technical discussion forum: Maintenance, performance, installations, modifications, how-to's and troubleshooting.
User avatar
fowlladyZ
Posts: 29
Joined: Tue Jan 19, 2010 5:44 pm
Car: 1990 300zx

Post

so it snowed/ices down here in nc this weekend and i cleared off most of my front window and then figured my wipers could get the rest off, but wen i hopped in the car and turned the wipers on there was a snap and the wiper didnt move... i turned them off and went to look, i cant really see mush so i cleared out the rest of the snow and tried again still no movement, but i can hear the wiper machines turning but the wipers rnt moving... this happened to anyone?if so how can i fix this cause driving with wiper in the rain last night was fun


User avatar
car nut
Posts: 3246
Joined: Mon Oct 12, 2009 8:33 am
Car: GT500.
Location: The hottest neighborhood in America (Forbes)

Post

Sounds like you broke something. I've never taken the wipers apart but I'd look in the FSM for how to do it. I'd take the wipers out and find out what it is. You might just be able to patch it up.

User avatar
Zwicked
Posts: 3133
Joined: Mon May 14, 2007 6:19 am
Car: 1990 300 ZX tt, 1990 240SX

Post

May have stripped the part that the wiper arm bolts to. Take the nut and arm off and see if the shaft or arm's splines are ok or stripped off. Sometimes just the nut comes loose

User avatar
fowlladyZ
Posts: 29
Joined: Tue Jan 19, 2010 5:44 pm
Car: 1990 300zx

Post

alright so i got into the wiper yesterday and the motor is fine, but i dont know how many of you have gotten down into the wiper system... but there is a little cap that holds the motor onto the wiper mechanism... and some how that cap like exploded into lots of little pieces ... any ideas on where i can oder one from? im thinking im just gonna have to find a junk yard and get one off a trashed z... but there really isnt one iv found near by...

DanDrath
Posts: 1393
Joined: Sun May 10, 2009 8:19 am
Car: 1990 Nissan 300ZX 2+2 TT
Location: Long Island, New York
Contact:

Post

sorry op to thread jack but my wipers smack the cowl (they go down to much) When i pulled the cap off and removed the nut a while ago i couldn't get the wiper off is there a special way to do this i was afraid of braking something

User avatar
fowlladyZ
Posts: 29
Joined: Tue Jan 19, 2010 5:44 pm
Car: 1990 300zx

Post

HA, ya i had that problem too.. im pretty sure that they haddent been take off in 20 years so they were kinda stuck but some liquid wrench and using a flat head for some levage got them off... there really isnt anthign to break there...

DanDrath
Posts: 1393
Joined: Sun May 10, 2009 8:19 am
Car: 1990 Nissan 300ZX 2+2 TT
Location: Long Island, New York
Contact:

Post

haha alright cool thanks. Well with my luck if rip the shaft out of the wiper motor or something.lol


Return to “300ZX (Z32) Technical”