Will's SR20 build (56k no no!)

Post by **x240xdrifter** » Thu Sep 11, 2008 12:09 pm

DJButton wrote:Wow! I still can't believe this was going to just be a simple throw it in and run with it swap.

lol funny how that happens, eh?

Post by **the converted** » Thu Sep 11, 2008 1:52 pm

Looking good man. Guess your still a ways away from using my starter and flywheel

Post by **x240xdrifter** » Thu Sep 11, 2008 2:11 pm

the converted wrote:Looking good man. Guess your still a ways away from using my starter and flywheel

haha ya, which btw, i need to give you some cash for

Post by **the converted** » Thu Sep 11, 2008 2:17 pm

Yup, think you can come up with an un-cracked windshield in the next few days?

Post by **x240xdrifter** » Thu Sep 11, 2008 2:26 pm

hmmm cant say i do, but i do work for Nissan now, and I get parts 10% above cost so if you need anything let me know

Post by **positron1** » Thu Sep 11, 2008 5:58 pm

That is excellent! Wonderful job indeed!

Post by **x240xdrifter** » Fri Sep 12, 2008 11:59 am

positron_ wrote:That is excellent! Wonderful job indeed!

Thanks man!

in other news, found out today I need to go with aftermarket pistons, so lol ya, this build is turning into something completely different!! lol so I'm in the market for stock bore aftermarket pistons, * hint hint*

Post by **duffman1278** » Fri Sep 12, 2008 1:56 pm

Definitly get on that honing, it'll make your engine look completely brand new. Looks semi new right now. Good work.

Post by **x240xdrifter** » Fri Sep 12, 2008 3:10 pm

duffman1278 wrote:Definitly get on that honing, it'll make your engine look completely brand new. Looks semi new right now. Good work.

forgot to mention its been honed and indeed does loo very pretty now cause of it, which sucks, cause I hate to put it back together cause it looks sooo good lol

Post by **jspec603** » Sun Sep 14, 2008 6:52 am

Wow Will! This is turnin out to be an awesome build! Keep up the good work!

Post by **x240xdrifter** » Mon Sep 15, 2008 12:41 pm

jspec603 wrote:Wow Will! This is turnin out to be an awesome build! Keep up the good work!

Thanks man!, but seriously nothing compared to your car man

Post by **x240xdrifter** » Sun Nov 02, 2008 7:29 am

UPDATE: 11-2-08

Been freaking forever since i've updated. Not much progress as been done as i am saving up and work/school going on. I have collected a handful of parts for the project so far:

Picked up a new never used E-manage Ultimate, a APEX'i EL 1 electronic boost gauge, Megan Mani, HKS turbo timer and Greddy Type-S BOV. This parts collection couldnt be possible without the help of some really good excellent friends annd 240 owners As for the build process. Still waiting to get engine bearings. Need to remeasure the Cylinder Bore to double check so i can get pistons. once thats done i can actually start building. Saving up still, so basically as winter comes close to rolling in, im saving and part collecting while slowly building with hopes to get this done before april time will tell!

Post by **the converted** » Sun Nov 02, 2008 11:56 am

Nice stuff you got there. If your still looking for those bearings here is the place that I got mine from.

Reid's Automotive909 Temple StWhitman, MA 02382(781) 857-2500

Post by **x240xdrifter** » Sun Nov 02, 2008 12:09 pm

the converted wrote:Nice stuff you got there. If your still looking for those bearings here is the place that I got mine from.

Reid's Automotive909 Temple StWhitman, MA 02382(781) 857-2500

thank you mark I'll give them a ring soon

Post by **Torgus** » Thu Feb 12, 2009 4:50 am

UPDATES?

Post by **x240xdrifter** » Thu Feb 12, 2009 10:20 am

Torgus wrote:UPDATES?

Its been a very long time since an update, but with good reason. I got laid off from my job at Nissan due to the rough economy. I was working there for a while saving up alot of cash, and i did, but i got laid off the begining of December so unfortunately the savings have dwindled. I got my old job back, but barely working enough to pay for gas ( im going to school at the same time) So money is very tight at the moment. I am still working on the SR, but im just waiting for money to buy the parts i need. I need to get bearings and the oil pump/ timing chain set up and i can slowly start putting it back together.

Post by **viciousjames** » Thu Feb 12, 2009 3:46 pm

was the s15 the only motor that came with metal tc guide?

and awesome build bro!

Post by **x240xdrifter** » Thu Feb 12, 2009 4:36 pm

viciousjames wrote:was the s15 the only motor that came with metal tc guide?

and awesome build bro!

yes, as far as i know, the s15 guides are the only ones that are metal and thank you for the kind words, slowly but surely!!

Post by **viciousjames** » Thu Feb 12, 2009 5:08 pm

awesome! cause i justhelped finished my friends build.

built by rpm pensacola fl

272 crower cams87mm cp pistons740 cc injectorsgarrett gt2871ralot of other upgrades

and we found a block in his garage(which i took off of him lol)and i couldn't figure what block it was. but it had a big mouth oil strainer. and metal guide. awesome to know i might have a s15 bottom lol.

which i am building now.

thanks bro i wish the best for your build.

[IMG][/IMG]

Will's SR20 build (56k no no!)

Re: Will's SR20 build (DJButton)

Re: Will's SR20 build (x240xdrifter)

Re: Will's SR20 build (the converted)

Re: Will's SR20 build (x240xdrifter)

Re: Will's SR20 build (the converted)

Re: Will's SR20 build (x240xdrifter)

Re: Will's SR20 build (positron_)

Re: (duffman1278)

Re: (x240xdrifter)

Re: (jspec603)

Re: (x240xdrifter)

Re: (x240xdrifter)

Re: (the converted)

Re: (x240xdrifter)

Re: (Torgus)

Re: (viciousjames)

Re: (x240xdrifter)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums