What was done to your 240 today?

[h2v7]

Finished up moving the wiring harness so it doesn't try to occupy the same space as the wheels that are coming.

how easy was fenders to put back on.

did they go back on perfectly as far as fitment and lining up

someone told me that when i tuck my harness my fenders will go back on funky...

[kouki munster]

They will only go back on weird if the harness gets in the way of the fender, and lining up body panels isn't hard, especially if they are going back on the same car that they came off of, just take your time and be patient. The fun part is going to be getting the driver's door to line back up after I swap out the old saggy hinges for the brand new non-saggy ones.

[h2v7]

ok thanks thats s14 huh?

[kouki munster]

Yep.

[Lobo240sx]

Ordered Amsoil since no one had it in town within a 50 mile radius....

Got the bolts and nuts off the old cams and swapped them. Made sure timing/cams tensioner, CAS were set right. Need to bleed lifters once I get oil.

[Sittinsidewayz420]

just took off my whole front left tie-rod to make room for a new one. It got busted after it hit a curb and snaped in half : ( but i will fix it no matter what!

[originalyunique95]

replaced knock sensor in it and added oil to her..guess i got a leak now

[240sxAli4Life]

Changed the oil, and bled brakes, new brake fluid!

[jluck113]

Put on my front bumper after track season , and redid my shift boot

[wckedintentions]

disapointingly stared at her, thinking you should be running by now...

[idahotuner]

i thought about her

[h2v7]

Changed the oil, and bled brakes, new brake fluid!

twinsies

i saw snow today yall!

[danshaz82]

i saw snow today yall!

i saw some yesterday
good thing i just picked these up, so now i can put on some snow tires

[tEknoS13]

Removed gas tank to dispose of 5 year old gas that smells like paint thinner. Nicely rusted inside :-) Threw some Evap-O-rust in there, scrubbed it. Looks good now. Went to Touge Factory for a new Walbro pump since the one I put 5 years earlier rusted. Installed pump, tank, and now.have to re-do so wiring. Found reason why pump wouldn't engage, wire connection from black/pink broke. So happy...

[badbob2121]

put these on

[h2v7]

looks nice what are they grids?

[badbob2121]

looks nice what are they grids?

no

varrstoen 2.2.0

[idahotuner]

pulled my silvia grill apart, going tosee how it looks tomorrow

[originalyunique95]

Cleaned the trunk found these with some water in the very corner



Took out the seats and vacuumed and tuff stuff'd the carpet, seats and floor mats.



Then changed the oil and washed it..
Also took advantage of the cleanliness and took some photos

[gt28rsftw]

looked at her and said yeah ur sexy lets go drift the s*** out of some corners lol then got into a lil race with a rx8.....slow rx8 hahaha SR20DET > rotary

[Lobo240sx]

Replaced the PITA coolant hoses under the intake with silicone ones. Tried to use braided lines but the clamps wouldn't tighten all the way. Tried to start her with a jump, but the battery is not giving enough cranking amps. Dropped it off at Vato Zone to get a full charge.

Sounded like she wanted to roar though. Hopefully tomorrow I can bring her back to life.

[Lobo240sx]

Battery was bad. Car runs but timing is off or need to remap the tune. I will see what is up with it tomorrow.

[PyR0NiAk]

Hung out with a few from our 60+ car club, and got some pics of a few of the Nissans..

[TwoFourOhh]

I took 2nd in points in the NEPA Region, SCCA SOLO2, Jack Williams Tire and Auto/Auto Addictions 10 race series in the street Modified Class this Season....Fugn right. Next year with some slicks and more horsepower im going to really do some hurtn. Also installing a cage/seat/harness so I can start club racing!!!!

Team Bbcm/Zern Racing

Peace

[Lobo240sx]

Finally got it in time but now my front main seal needs replacing. If the baffle plate is leaking, you SR20 guys know what has to happen next. While the engine is out if needed, I will paint the engine bay, replace the rear main, and reseal the timing cover too.

[originalyunique95]

ziptied my plate to my bumper after getting stopped for having it in my windshield for obstruction of view..eventhough the ticket said my car is a Toyota..silly state cop.

[Lobo240sx]

Replaced the front main seal and tightened the chain tensioner where it meets with the head and it stop leaking!! Now I still got a rough idle and have to give it a little gas to stay running. I will make a thread in SR section to see if you fellows can help me out. Happy Thanksgiving to all. Couldn't believe it but somebody called about a job offer today and I go see about it on Monday!!

[Mercury_Hg]

Finished up moving the wiring harness so it doesn't try to occupy the same space as the wheels that are coming.

mismatched lugnuts ftw

[kouki munster]

Former 4 lug car, and to much of a cheap a** to buy 4 more matching lug nuts FTW!!

[Warped161]

looked out the window to see my car wrapped in tarps still, wish i had a garage and the drive to go out there and finish the car.