What was done to your 240 today?

[originalyunique95]

Finally hand washed her today, got the privilege to get away from car was power washes once. I dont have a hose at my house so am kinda forced to..

[OM3GA]

I have some hose you can borrow

I picked up some of this for when i change my power steering fluid.

[j240sxxx]

bought a blinker switch to hopefully fix my tail light problem

[Adam240sx]

Bought a new fuel filter, ngk plugs, oil filter, installed new plugs, filled the tank. Doing the oil change tomorrow, along with changing the fuel filter. It was raining like mad today so I had to change my spark plugs in the car wash bay. Cause I don't have access to a garage. I got her done though.

[Gabes13]

Finally hooked up the oil pressure gauge yesterday, and realized my brake master cylinder is leaking all over the place.... yay.

[wa-chiss]

Well, my 240 did something for me. Does that count?

2 weeks ago, I finally got it back on the streets. It had been parked for almost a year. Well, summertime in Texas is HOT! Especially without A/C. It was working before I parked it so I was a little dumbfounded when it didn't work. I would turn it on, the idle would raise (like it should) but the clutch never engaged. I did a little rooting around today with it to find out the problem. I found out that I had power to the coil. My prognosis? New compressor (can't just get a clutch now a days). Tonight, after work, I drove around, in the rain, to the parts stores shopping for compressors. On my way home, the windshield started to fog up. I turned the fan on and selected defrost to get air across the windshield. I noticed the air was a little chilly. Definitely too cold even for a rainy evening. I selected the face vents and sure enough the air was cold. I got back home and immediately raised the hood. Low and behold the damn thing is working.

My car fixed itself for me so I wouldn't have to spend $250 for a new compressor.

[SBC 240Z]

^ I'm tellin ya, nissans do this all the time, especially the Zs

[98blackbell]

Kid took the car to the track!

13.6 at 107 2.5 60 ft
14.1 at 106 2.4 60 ft missed 2nd gear
13.6 at 101, turbo spike shut(16lbs is safety) off with 2.2 60 ft

Nistune with Z32 MAF and stock S15 settings, 12lbs boost, drove to the track with a/c and drove home good night~

New Tomei Cams in next week and finally a tune apt at Whites Automotive in Rockledge FL. Gary going to get the tune done there. The car is way rich, we will see. He will try to take the car back to the track next Friday.

S1

[jerseydevil36]

recovered the Glovebox with some leather alligator skin.next is the door panels!!!

[ToplessVert]

Got a header int he mail for the KA and spare valveocer gettign stripped... bleh green is a yuck color for a valve cover

[JDM240SXcoupe]

Installed my Powered By Max pro coilovers. Cant drive it because the alignment is so bad. Im waiting till PBM releases their pro toe link n rear traction rods on October.

[proxx]

I painted my front and rear wiper arms, painted the front air dam brake vents, took off my rust sponge, picked up a fiberglass kit, and chipped/sanded/scraped the rust off last night, got an alignment and balance today, and should be ordering a new bmr exhaust tomorrow to replace my rusted out stock system. not to bad for only having the car for four days now i think.

[SBC 240Z]

i posted it on Craigslist, f*** this car

[pooter240]

Gave it a wash and fixed my seat!

[Treskilyon_08]

headlight restoration

[breadbox]

Checked all fuses and still have the batt light and buzzing gauge cluster.

Hopefully I have time today to get alt bench tested.

[thanats]

painted and installed side skirts.....love them!

[SBC 240Z]

i posted it on Craigslist, f*** this car

So far I've been offered $950, $1800, or a shotgun, these are three separate offers, for a S13 with a/c, full interior, fresh paint, . . . fml

[Hoffman5982]

If it's stock, 1800 isn't bad

[93240guy]

Replaced head gasket, valve cover gasket, tube seals, radiator, t-stat, waterpump, belts. Resealed the oilpan. Took motor mounts off. Now waiting on motor mounts, trans mount, ss brake lines, n coilovers to get in.

[benz88]

got 2 6Volt horns off a 50 chevy truck. Cant wait to install these lol.

[The_caveman]

Installed d max 180sx side markers

[JDM240SXcoupe]

Couldn't wait toll PBM releases their parts so I went and bought SPL titanium rear toe rods! next im buying SPL titanium traction rods. Also I bought 225/45/17 tires for my Square G6 rims! looks f**ing niiice.

[SBC 240Z]

Fixed my mothereffin speedo wooooooooooo, so nice to have the HUD working now, hopefully this will help sell the car. Turns out the capacitor wasn't bad, it was that whole little circuit board that you have to take off when disassembling the speedo unit. I replaced the capacitor and the unit wouldn't light up at all, after soldering and resoldering all day i finally starting swapping parts with another spare I had and when I swapped out that little circuit board and BAM working diggy speedo

[pj]

brushed and paintd some rust spots under the car, changed the oil (and frowned when only 2 qts came out wth), broke my tachometer more.sweet.

[240rican]

I stripped the entire interior, started sanding it and I put it on jack stands...Next week some more work to it!

[SBC 240Z]

SOLD IT!

[amakadius]

The car is painted and all together and i am trying to get my timing right so i can drive her again. this is the longest that she has been without driving.

[Rays240sx]

I picked up my NISSAN Key Value Clutch Kit

[Lobo240sx]

Finally picked up my head from the machine shop. They did a very nice job on it. Ordering 1.2mm Tomei HG. Hopefully the POS Heap will be storming the streets again..