the CRANK position sensor

[Ba1234]

Ya i need some help i have been having problems finding the crank sensor and getting service engine light. If someone could post some pic or tell me how to find it i would greatly appreciate it.

[turbowofford05z]

The sensor is located under the car on the transmission on the drivers side upper portion you will have to reach around near the flywheel it actually is on the bell housing near the flywheel it is held on only by one bolt i think its a 12mmsadly thats the best i can describe it you are going to have to get under the car and reach up

[rmezz13]

zerothread/344626The FSM's for your car are in there... I looked up an 04.5 coupe (mine) and this is what i found.... People, there is only one stick and it has some extremely helpful links in it. I recommend looking at it when searching for answers... Its the ONLY sticky in 350Z forum!

this is the link of the FSM i looked up, scroll down to EM-27. The oil pan and oil strainer assembly shows the crank position sensor (#16).http://www.nicoclub.com/FSM/35...m.pdfthere ya go... Turbowoff is right on the location/where to find it, i just thought i might be able to help you a little further. If you spend more time in the FSM you can probably find more info and diagrams that would be more helpful, i only took a minute to find it quickly...