Post by
raven2345 »
https://forums.nicoclub.com/raven2345-u70863.html
Sun Aug 07, 2011 8:39 pm
I just found this page on a google search... I just wanted to clear something up here from what I've read: The wrist pin in the Supertech pistons are offset to the left, looking from the front of the motor, by about 2mm. There apparently is no dead give away on which direction to put them in; the way the name is stamped (or whatever it is) on the piston, does NOT guarantee proper direction. So if you're using Supertech pistons, just make sure you get out some form of measuring tool, and make sure that the wrist pin is offset to the left/closer to the left side of the piston, when looking from the front/pulley side of the motor.