SR20DET HARDOBODY UPDATE PICS!! need some help now

[AL1222]

whats up guys so a month or 2 ago i started this swap as you all know, swap was not very hard at all but everything lined up as i thought it would. intercooler piping is done, coolant lines are not done but those are no biggie. the problem i have now is wiring to turn the sucker on now. i put the new harness on and wired up as much as i could my self, also extended the o2 sensor plug and the MAF sensor plug. so now im stuck dont know what else i have to do to get it going. does anyone have a write up on this or anyone that knows there wiring..

check out the pics...almost done


Modified by AL1222 at 5:48 PM 10/27/2008

[Felipe]

i always wanted one with the SR

[nismopu]

i always wanted one with the SR

why? Its just spending needles money you could put towards turboing your KA. lol.

There's several good sites I used to know of one that had really good pics, unfortunately I do not know of them right now. However this is a good one because the 240sx uses the same pinout as the pickups. peace.http://www.zcar.com/forums/read/2/851694

its the second post down.

[AL1222]

link does not work...=( someone has to have a write up on this...ive searched and searched online and on these forums and i havent found anything regarding wiring

[nismopu]

theres a crap ton of write ups out there! theres one on nissancustoms.com and theres wiring diagrams at phatg20.net. peace.

[AL1222]

websites you told me about have no info...all everyone talks about is if the motor will fit, what mods will you have to do. yes some people do show pics but no one has a writeup on the wiring process. thats all i keep seeing is people talking about it...still on the hunt for wiring help...ive been online for a few hours and still nothing =(

[nismopu]

you mean to tell me you cant figure it out from those sites? You have no idea how to read FSM's? I am so confused! You want this spoon fed to ya?

[nismopu]

BTW, you have your fuel lines backwards.

[AL1222]

look buddy there is no info all everyone did on nissan customs is talk about if the motor fit, mods and a few people had pics of hardbodys thats was it...no wiring info...that phatg20.net has nothing there about the sr20det...and to let you know the fuel lines are not hooked up yet i just hooked them on like that so i dont get any dirt or anything in the lines..but no need to be rude here i just want to know if anyone has a writeup on it...i dont want it spoon fed to me im sure ill figure it out but if someone has done it im sure i can save alot of time dont you think smart@ss

you mean to tell me you cant figure it out from those sites? You have no idea how to read FSM's? I am so confused! You want this spoon fed to ya?

Modified by AL1222 at 12:16 AM 10/28/2008

[nismopu]

I love how deffensive people get when info is provided to them if you cant find it on those sites then I am sorry. g/l.

[nismopu]

if you cant fiugre it out from these two fsms then whats the problem? s14 silviahttp://www.phatg20.net/compone...id,35/d21 HB/240sx ecu pinouts are the samehttp://www.phatg20.net/compone...id,78/

[Felipe]

true...

ok so now i want a.....

wait for it....

ready....

TURBO DIESEL

2.8Litre, 6cly, turbo diesel with intercooler, and electronic diesel injection.

[nismopu]

Now theres an engine I would like to have as well!

[white90esex]

nice job with the SR man.

[AL1222]

thanks man, im hoping i can get it running soon. a fellow nico member is trying to help me online to see if we can get her going

nice job with the SR man.

[AL1222]

so after a few months of lagging on this project the beast starts up and all the electrical is done!! just need a s13 dohc cluster, if anyone has one let me know. just need a down pipe, custom exhaust, cut drivshaft and were ready to rock and roll lol! 2 to 3 more weeks and we should have a running sr20det hardbody cant wait

[SHIFT_LOVE]

omg thats rad...somthing ive always wanted to do