DoN_BLaZe34 wrote: ↑

Wed Jun 21, 2017 6:37 am

Just thought about something:

Having seen the Y50 strut bar, it is possible to ask them to design the Y51 bar in such a way that the engine cover doesn't have to be cut in any way? It's early enough in the process that I'd figured it was worth at least asking.

Ilya wrote: ↑

Wed Jun 21, 2017 11:44 am

Yeah I want to avoid cutting anything just in case when I sell the car I can bring it back to stock without having to buy an engine cover too, etc. Can't imagine those things are cheap.

CRV_33 wrote:

DoN_BLaZe34 wrote: Just thought about something:

Having seen the Y50 strut bar, it is possible to ask them to design the Y51 bar in such a way that the engine cover doesn't have to be cut in any way? It's early enough in the process that I'd figured it was worth at least asking.

That's definitely a good point. Soul Function came by my house about 5-6 months to do a quick mock up the V8 engine bay. We definitely discussed some options, but we have to remember there isn't much room between hood liner and the top of the engine cover. When Soul Function contacts me to bring my car by again I will definitly bring it up to them. I also saw that Ilya brought this to their attention too.

Ilya wrote: Yeah I want to avoid cutting anything just in case when I sell the car I can bring it back to stock without having to buy an engine cover too, etc. Can't imagine those things are cheap.

Malbec 56 Beast wrote: Is there a delivery date set or is it to early?

Andy

Soul Function wrote:Still looking for additional members to keep the costs down for everyone involved. Please do not hesitate to reach out to me directly via DM or at [email protected] with any questions you may have.

Ilya wrote: ↑

Tue Jun 27, 2017 9:19 am

Soul Function wrote:Still looking for additional members to keep the costs down for everyone involved. Please do not hesitate to reach out to me directly via DM or at [email protected] with any questions you may have.

ssmrico wrote: ↑

Tue Jul 11, 2017 4:57 am

nice I'm waiting on one

Soul Function wrote: Thank you for your interest in the Front Strut Bar group buy for the M37/M56/Q70 Y51 platform! With a successful Y50 group-buy under our belts, we are very excited to take on another project and have the opportunity to develop and provide a unique part to you.

In order for the group buy to move forward, a $75 deposit is required from a minimum of 25 people. Deposits will be due by Saturday, July 29th. If the deposit requirement is not met, or the project encounters unexpected costs and is deemed unviable, everyone who has paid a deposit will receive a full refund. Once the design is final and the project deemed viable, your deposit will be Non-Refundable.

We have already begun development based on a M56 and will soon test on a M37 as well. The design should be finalized by the end of July and the color scheme will be the same as our existing Front Strut Bar products.

ACTION REQUIRED: An invoice of $75 will be sent to everyone on the list. Please confirm your participation by paying the deposit invoice.

We estimate the Strut Bars will be ready to ship before the end of the year, at which time you will receive an invoice for the remaining balance. Total part cost will be between $205 and $225 for all group-buy members.

Last but not least: More people participating in the group buy means lower costs for everyone involved. If you know anyone who might be interested, please share this email or my Facebook posts from the Fuga enthusiasts group.

We want to thank everyone on NicoClub and the Fuga FB group for driving interest and getting the initial list going. Special shout out to Ilya, Michael, and Nana - thank you, you guys rock!

Do not hesitate to reach out to me with any questions or concerns.



Sincerely,

Andy Zhao and the Soul Function Team

[email protected]

ssmrico wrote: ↑

Tue Jul 11, 2017 6:24 am

which fuga group? wonder if I'm on it on fb

armybrat wrote: ↑

Tue Jul 11, 2017 2:17 pm

I like this mod, but I am concerned about how the brackets are going to mount to the struts. There are lines and wire harnesses in the way which will have to be moved, as well as the hood clearance as mentioned before:


Switched to Imgur - looks like a much easier site to use!

ssmrico wrote: ↑

Tue Jul 11, 2017 7:34 am

Ah ok on those thx I emailed them

CRV_33 wrote: ↑

Thu Jul 13, 2017 7:59 am

armybrat wrote: ↑

Tue Jul 11, 2017 2:17 pm

I like this mod, but I am concerned about how the brackets are going to mount to the struts. There are lines and wire harnesses in the way which will have to be moved, as well as the hood clearance as mentioned before:


Switched to Imgur - looks like a much easier site to use!

Soul Function has already dropped by my house a couple of times and are addressing that issue as we speak. I have seen some of the prototypes and I think you guys will be pleased with their solution. Soul Function wants to make this installation as easy as they can for their customers!

1GR8M56S wrote: ↑

Fri Jul 14, 2017 10:25 am

that's a good idea, and if it's gonna be in a certain color or what options we have if any.

SoulFunctionAZ wrote: ↑

Tue Jul 18, 2017 4:31 pm

Hey guys, Andy here from Soul Function,

We've received 9 deposits so far and need at least 20 to keep this project alive. There are 25 people on the list so far but we are constantly looking for additional members to keep the final cost down for everyone! If you are reading this and are on the fence, please let me know what your concerns are and I will be sure to address them.

I will be sharing some of the pictures we took during our early development session - these will definitely address any concerns regarding all of the stock lines and brackets that currently litter the engine bay.

I can be reached via PM me here, on Facebook or at [email protected]

Ilya wrote: ↑

Tue Jul 18, 2017 7:53 pm

Thanks Andy!

Welcome to the forum officially.

I just paid my deposit...let's do this!