SOHC Injector Harness find??

Information on the naturally-aspirated KA24E and KA24DE engines.
User avatar
mikecef2
Posts: 146
Joined: Tue Jun 12, 2007 7:15 am
Car: 90' Nissan 240sx (SR20det)

Post

I have been searching high and low for an Injector Harness Connector for a 90' ka24e that are in good condition with the little metal clips. Can anyone help me out because it seems an impossible find.


User avatar
mikecef2
Posts: 146
Joined: Tue Jun 12, 2007 7:15 am
Car: 90' Nissan 240sx (SR20det)

Post

Is it true that the Nissan Stanza has the same injector harness connectors and injectors as the sohc 240??

pflicht
Posts: 2500
Joined: Sun Mar 11, 2007 12:21 pm
Car: 1991 Nissan 240sx - SOLD
2000 Lincoln LS - DEAD
1997 Nissan Maxima - DD
1991 Nissan 240sx - Project

Post

IDK about the Stanza, but good luck trying to find that harness. One of my 240's didnt have the clips while the other one did but were in horrible condition. Besides i HATE those clips. They get annoying every time i wanna remove something!

User avatar
mikecef2
Posts: 146
Joined: Tue Jun 12, 2007 7:15 am
Car: 90' Nissan 240sx (SR20det)

Post

ok so I sourced 4 injectors with clips attached from a nissan stanza on ebay. It says it will fit a 240 but does anyone know for sure before I actually buy these and waste my money? Here is the link http://cgi.ebay.com/ebaymotors...8.lVI

airborne
Posts: 21
Joined: Sat Mar 06, 2004 12:35 pm
Car: 89 Nissan 240SX FB
89 Nissan 240SX coupe
92 Nissan 240SX vert
93 Nissan 240SX FB

Post

some stanzas had the ka24de and definetely not fit the harness or injectors on the ka24e. dont waiste your money

User avatar
mikecef2
Posts: 146
Joined: Tue Jun 12, 2007 7:15 am
Car: 90' Nissan 240sx (SR20det)

Post

For the 1990 model year the American Stanza was replaced by a version of the Nissan Bluebird (U12 series), wearing Stanza badges. The JDM Bluebird has rear license plate between the tail lights, the Stanza's is mounted on the bumper. The fourth generation Stanza was offered in two trim levels: XE and GXE. The sporty SE was added for 1992. This version used the 2.4 L inline-4 Nissan KA24E engine, an upgrade from previous generations in displacement (1974 cc to 2398 cc), power (94 hp to 138 hp), and torque (114 ft·lbf to 148 ft·lbf). SOURCE - WIKIPEDIA I wish people knew what the F*** they were talking about.


Return to “KA24E / KA24DE Forum”