soch piston in a dohc

[Oligator]

hi hi hi!I see a lot of people say soch piston will ran great in a dohc ka24.Any people have that setup!? People say a lot of thing but never see a setup with soch piston. Like 3 people do that. And the life of the ka? He will be good with 11:1 of compression? Thanks a lot!Before to send that post I do search. hehe

[boker240]

i think it bumps comp. up , but i dont think that much , mayb like 10.5.1.

[-RJ-]

try it and tell us about it =D

[Oligator]

I will do that! hahaAnd if the ka24 say powwwwwwwww I will loose 200$. I will do my setup in the garage and give some news.if any people have sohc piston let me knowthanks

[ka-t4u]

you will have a hole in your wallet after this i was about to do it and i did my research , and you will have to run premium fuel all the time so you wont be knocking doors.... if you know what i mean...lolz, but seriously you'll spend a lot on gas and i don't think it will be too reliable, but if you decide to do it make sure you have clearance with the valves and all that crap... good luck

[Oligator]

Thanks again! I will put sohc piston and see what happen. The late version of sohc have good piston. So the co will be 11:1 and not 11:6:1.

[TheOne]

there's dished sohc pistons and flat top sohc pistons, the flat top's will give you 11.6:1 or so, the dished will give you ~10.5:1.

[Oligator]

People have the not same answer. hahaNot a big deal. Thanks for the info!

[shpaintball]

i agree with TheOne on compression however its very unlikely u find flat tops they will have a slight dome ...ive been down this road ...you will enjoy it if you can get everything done and the compression will beat on that motor ... the power gains are awsome just make sure its tuned properly and lets see what results u get ...i did it and it was fun but thats about as much tuning as the motor could handle

[TheOne]

if you need some, i'll sell you mine for $100 + shipping, they come slight dome, with rods, and new piston rings.

[Oligator]

hummmm, Is it brand new?

[Oligator]

Thanks for the reply shpaintball!I appreciate. I dont want a drag car... just make a little push on the ka.

[Iceman00]

You'll ping. Period. You'll need some way to tune the car, because even fully retarding the dizzy, the car is going to have to much timing.

[d3vilskid]

its possible here is a site of one guy that done it, well more ppl done it someone did n advance the timing 40 degrees. anyways here is the site, hope it works

ok never mind site doesnt work it always get change to the nicoclub site, anywho its in freshalloy.

granted he has other stuff done to it too!!!

[Oligator]

Holy cow! I see is setup... It's good. 200 hp for a n/a ka is awesome.Dont like is exhaust but whatever. haha drag styleThanks again!

[d3vilskid]

yea i dont like it either i would prefer a custom 4-2-1 header not one like that custom 4-1 header kinda ugly. np man