S14 Turbo + HORSHAM-DEVELOPMENTS stage 3 chip = :)

Post by **F3600** » Sun Aug 21, 2005 10:50 am

Well i finally got to test my car today..

Its very nice... the boost start kicking a 4000 4300 and scream all the way to 6000 ( i didnt go any further.. ). I will have to check my intercooler piping cuz i cannot boost more than 1.0 bar the boost spike to there and fall back to 0.9.. should be able to boost at 18 psi with this chip.

Except my piping and some spark adjustement the car is reacting perfect to the upgrade im pretty happy . My multichecker showed me 287 Hp on my best run. i would like to get a dyno run but there no one around me area .

Heres a reminder of my setup

s14 Turbo , FMIC , walbroo fuel pump , 444cc injectors, z32 maf

Post by **NeedCAforS13** » Sun Aug 21, 2005 11:49 am

nicely done man I'm running his stage 2 chip with a t28 and it feels pretty sick!

Sean

Post by **8ggalant** » Sun Aug 21, 2005 5:56 pm

Post by **1SlowCA18DET** » Sun Aug 21, 2005 6:17 pm

where can i get this chip?

Post by **NeedCAforS13** » Sun Aug 21, 2005 6:52 pm

http://www.h-dev.co.uk/

Post by **JDMSIL80** » Sun Aug 21, 2005 8:48 pm

What kind of tools do you need to assemble the chip by yourself?

Post by **c-rad** » Mon Aug 22, 2005 12:57 am

JDMSIL80 wrote:What kind of tools do you need to assemble the chip by yourself?

Assemble the chip? Do you mean install it? If you meant install it, you need to have your ECU socketed. Other than that, the only tool you need is a philips head screwdriver.

Post by **CA19DET** » Mon Aug 22, 2005 4:26 am

thats porbably 287hp and bout 250whp.. sounds bout right... would be interesting to see how the multichecker compares to a Dynojet.

and the only thing is that i find boost is comming in late??? my T3/T4E 50T .63 gets full boost by ~4500rpm and is considerably bigger.

i'll checlk your piping, timing, leaky fuel injector o-rings, leaking vac lines etc...

Post by **F3600** » Mon Aug 22, 2005 8:36 am

I got a boost leak somewhere... even with the wastegate unhooked, i hit 1.0 bar and the thing just go back to 0.9 and black smoke. I pressurized my piping and i have a leak near the throttlebody but i didnt find the source.

Post by **float_6969** » Mon Aug 22, 2005 10:48 am

There is a little (very small) hose directly under the TB. Very hard to see.

Post by **cortina-mk1** » Mon Aug 22, 2005 6:13 pm

you can also get here in australia where i believe the software is written.

http://www.dr-drift.com does exactly the same thing as horsham developments

Post by **[email protected]** » Tue Aug 23, 2005 4:02 am

Hi Guys

Just noticed this

F3600 wrote:Well i finally got to test my car today..

Its very nice...

Cool, glad you like it

NeedCAforS13 wrote:I'm running his stage 2 chip with a t28 and it feels pretty sick!

Hope that means good

cortina-mk1 wrote:you can also get here in australia where i believe the software is written.

I write all my own re-mapping software. For example this is a screen shot of the software I use to re-map CA and SR ECUs:

I can remap all the SR20DET variants, CAs and tried my 1st RB26DETT last weekend. I currently have off the shelf maps for the CA and SR for various mods - more info on my web site

Post by **NeedCAforS13** » Tue Aug 23, 2005 6:00 am

[email protected] wrote:Hope that means good

oh yeah I only wish I had a stage 3 chip now, or something tuned for 440cc injectors and a Z32 maf... oh well, safc for me.

Sean

Post by **cortina-mk1** » Tue Aug 23, 2005 10:46 pm

well sorry i stand corrected

Post by **float_6969** » Wed Aug 24, 2005 3:36 am

[email protected], it's good to finally see you on here!!! You're (ofcourse) well known on the SXOC forum, and I was quite suprised to see you over here. Welcome to the States!

Post by **[email protected]** » Wed Aug 24, 2005 4:06 am

float_6969 wrote:[email protected], it's good to finally see you on here!!! You're (ofcourse) well known on the SXOC forum, and I was quite suprised to see you over here. Welcome to the States!

Thanks for the welcome

Post by **Jezz_s13** » Wed Aug 24, 2005 4:58 am

LOL, Nice touch Jez.

An avatar of Jez while in the U S of A.

Post by **[email protected]** » Wed Aug 24, 2005 5:12 am

Jezz_s13 wrote:An avatar of Jez while in the U S of A.

Post by **NeedCAforS13** » Wed Aug 24, 2005 5:42 am

float_6969 wrote:[email protected], it's good to finally see you on here!!! You're (ofcourse) well known on the SXOC forum, and I was quite suprised to see you over here. Welcome to the States!

hey jez, did you have trouble with your old screenname? if you want us to reset the password or something I'll talk to an admin for you

Sean

Post by **[email protected]** » Wed Aug 24, 2005 5:45 am

NeedCAforS13 wrote:(hey jez, did you have trouble with your old screenname? if you want us to reset the password or something I'll talk to an admin for you)

Sean

That'd be good if you could - I tried the online password reset but I never received the confirmation email so couldn't log in. I may as well keep the "Jez" account then this one can be deleted if required

Post by **Jezz_s13** » Wed Aug 24, 2005 5:50 am

I had the same issue with email notifications not getting though.

IIRC Mr Float_6969 had to sort mine out.

Anyway, ain't chips great?...

Post by **pulsar gtr** » Wed Aug 24, 2005 8:02 am

I got a program for the 440cc injectors and z32 but I haven't tested it yet, as I don't have the engine up and running yet, if some one is willing to try it, I am willing to share it on this forum as I am honestly tired of people saying the got the program and they won't share it.

I got the ca18det program, all kind of Z32, RB programs and If some one wants it, let me know. zero charge, there should be a sticky here were people dump there programs for others to use, I know some paid for their programs but life is a two way highway, you gotta give some to get some.

Owell, any one willing to try this program with in a week let me know and I will email you the bin file.

Thank you,

RafiPULSAR GTR

Post by **NeedCAforS13** » Wed Aug 24, 2005 8:37 am

Rafi, can you burn a chip or no? I am interested in trying out your program, but I don't have a chip burner. I have an extra ecu with an unknown chip in it that I can pull to test. I guess send me the program and I'll try and find someone here in Orlando that can burn it for me

[email protected]

Thanks man,Sean

Post by **float_6969** » Wed Aug 24, 2005 8:38 am

[email protected] wrote:
Thanks for the welcome

Now I feel like a dolt. I, somehow, didn't realize you were on here before. What was your SN?

Post by **NeedCAforS13** » Wed Aug 24, 2005 8:52 am

"jez"

Post by **Jez** » Wed Aug 24, 2005 8:56 am

Got my old username back now Thanks NeedCAforS13

It was ages ago since my last posts on here.

Post by **float_6969** » Wed Aug 24, 2005 9:11 am

Well I don't care, welcome back anyway!!!

Post by **pulsar gtr** » Wed Aug 24, 2005 11:33 am

Hi Sean,

I do have an eprom burner, email me at [email protected] and I will send you the bin file if you are interested or if you want a chip just email me your addess and I will get a chip programmed for you.But I would like to get it in an ecu and tried with in a week or two to see how it performs.

Thanks,

Rafi

Post by **gore** » Wed Aug 24, 2005 3:14 pm

hey jez I was wondering if you had a 550/z32 chip. I'd love to get some of the black soot of the back of my rear end. makes people look at me funny, it looks like my s13 took a dump.

Post by **float_6969** » Wed Aug 24, 2005 4:14 pm

Gore, if you have black soot on your rear end, I think you need to start using Toilet Paper....

S14 Turbo + HORSHAM-DEVELOPMENTS stage 3 chip = :)

S14 Turbo + HORSHAM-DEVELOPMENTS stage 3 chip = :)

Re: (8ggalant)

Re: (NeedCAforS13)

Re: (JDMSIL80)

Re: S14 Turbo + HORSHAM-DEVELOPMENTS stage 3 chip = :) (F3600)

Re: S14 Turbo + HORSHAM-DEVELOPMENTS stage 3 chip = :) ([email protected])

Re: (float_6969)

Re: (Jezz_s13)

Re: (float_6969)

Re: (NeedCAforS13)

Re: ([email protected])

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums