S13 / S14 Cup holder arm rest

Post by **le_ryan** » Tue Jan 13, 2009 4:17 am

simmode1 wrote:Cool. I'd like them with cups if possible. Email details?

yeah just Email me at [email protected]

Im going today to the junk yards, see if i can get more cups .

Post by **le_ryan** » Thu Jan 22, 2009 3:48 pm

ok, i have cups now and im ready for orders !!!

Im going to pre-make a few single holders so that they are ready for shipping .

Modified by le_ryan at 8:35 PM 1/22/2009

Post by **chivalrybk** » Wed Jan 28, 2009 8:59 pm

Hey,You able to work on a single padded for an s-13? i'm gonna run to the Junk yards in the area to see if I can find extra armrests if you want some . I've also got blue vinyl for it.

Thanks,Andy

Post by **le_ryan** » Fri Jan 30, 2009 11:56 am

I can do that . Shoot me the lid and vinyl you want, I have cups and padded material, ready to be made up .

Email me and we can set it up .

[email protected]

Post by **MN240SXDriv3r** » Sun Feb 08, 2009 6:26 am

You gotta pay for those cup holders? The junkyards I've been too they consider the cup holders "trash" so they give them to you for free. I did this to my arm rest a while back and went to the junkyard and got 4 cup holders. The guys at the check out were like "WTF you need those for?"

Post by **le_ryan** » Sun Feb 08, 2009 8:00 am

well, i walk up with about 20 cups, lol and yeah i get the WTF you need those for look, and since i have so many, they usually charge me.Ive been there a few times and they said, no charge, but i only had about 3-4 of them .

Post by **Pirate_Freder** » Mon Feb 16, 2009 4:27 pm

Hey, can you work with a armrest cover from Red Line Goods? I am planning on getting the full set(shift, ebrake, and armrest) pretty soon here.

Post by **le_ryan** » Tue Feb 17, 2009 5:13 pm

I cant say yes or no, im not sure how they mod theirs up ...

Post by **BMAR240SX** » Mon Mar 02, 2009 2:31 pm

Hey ryan I am interested in one, since i never got it the first time. Lmk on the price and i will pay pal it to you asap

Post by **le_ryan** » Fri Mar 06, 2009 8:03 pm

pretty much its about $42, and if you pitch in the paypal stuff its around $45.

if your gonna paypal me its to [email protected]

email me when your ready, ill shoot you my address .

Im not quite sure what you meant, that you never got one ..?

Post by **BMAR240SX** » Sun Mar 08, 2009 8:47 am

Do I have to send you mine or you have some in stock?

I never ordered one the first time i backed out

Post by **le_ryan** » Sun Mar 08, 2009 4:24 pm

yeah i have some in stock, but but i have to charge you $7 more.so $52 to my paypal, and ill mod one up and ship it out .Single rear mounted S13 right ?

Post by **BMAR240SX** » Mon Mar 09, 2009 11:27 am

Nah i want two, sounds great tho

Do you mind if i send you 30 now and than the other 22 when it clears?

Post by **le_ryan** » Tue Mar 10, 2009 3:22 am

sure, make sure you put in the comments your shipping addres and your screen name, so i know who it is. Also i just made one last night to be ready to go, but its a single rear mount (best IMO) i made myself a dual holder, but i didnt like the way my elbow would find its way to the front hole.So i had to make a single rear mount for myself.

Post by **ViciousCesar** » Fri Mar 13, 2009 1:17 pm

dude. i'm about to email you for one. because i'm tired of 'macho size' drinks leaking on my car or the person holding them! lol

Post by **le_ryan** » Fri Mar 13, 2009 1:51 pm

email away, i have plenty of cups for now.

Post by **ViciousCesar** » Sun Mar 15, 2009 8:14 am

***

hit me up so i can purchase one.

Post by **DeformityX** » Tue Mar 17, 2009 12:12 am

Im not condoning these drinks in the car .....[url=http://imageshack.us][/QUOTE] omg HAHAHAHAHAHAHA

Post by **Azrial** » Thu Mar 19, 2009 8:40 am

How much for an s13 with 2 cup holders? Let me know if you have them in stock. You can email me at [email protected] or call if you want 513-207-2362 or if you have some ready let me know cost shipped to 45044 and send a paypal invoice. Scott

Post by **le_ryan** » Sat Mar 21, 2009 3:49 am

sorry for the late responses guys, I do have some lids here, not made, but im fixing some up this week .If you buy premade lids, its 55 shipped, as these came from my pocket.and if you mail me yours, its 45 shipped.

Post by **Azrial** » Sun Mar 22, 2009 12:32 am

are you using gm rubber things for the cup holders or are they plastic ones. I read through your how to. I'd like mine to be padded as well with 2 cup slots on s13 premade. Once you say x dollars for it then I will paypal the money over. Or you can send me a bill to my paypal or whatever it's [email protected]

Post by **le_ryan** » Sun Mar 22, 2009 3:09 am

I can use either or, i have both, plastic and rubber ones, your choice, I prefer the plastic ones, but if your getting a dual holder, i recomend the softer rubber up front and the platic on in the rear .let me know.and my pay pal is [email protected].

Post by **Azrial** » Mon Mar 23, 2009 5:32 am

Money sent let me know if it wasn't the right amount or something silly. s13 padded lid with 2 cup holders hard plastic. That one in the picture looks so sweet.

Post by **le_ryan** » Mon Mar 23, 2009 10:27 am

awesome, got it, Thanx, ill work on it tonight, should be done tomorow, may even get it out then, ill let you know.

Post by **Azrial** » Mon Mar 23, 2009 1:10 pm

Thanks bro I'll post some pics of it in the vert forum once i get it and get around to putting it in.

Post by **le_ryan** » Tue Mar 24, 2009 11:23 am

Azrial wrote:Thanks bro I'll post some pics of it in the vert forum once i get it and get around to putting it in.

well here it is, i put it out side to take the pic, theres a couple small rain drops on it.Ill have it shipped tomorrow .

Post by **Azrial** » Wed Mar 25, 2009 3:31 am

so sexy. Thanks for getting it made so fast. I expected to be waiting a week or so. I'll post pics in vert forum in my thread when i get it and get it in. Should be so nice having more cup holders since I put in a free box cup holder just don't like the location of it because it blocks my radio controls and I don't feel like putting velcro on the remote and sticking it somewhere

Post by **MEAN1NGoFLIFE** » Wed Mar 25, 2009 8:16 pm

hey do you have any in stock that are a Padded Single rear mounted S13 that you could ship ? the extra 7 bucks wont bother me . id appreciate it
Modified by MEAN1NGoFLIFE at 11:30 PM 3/25/2009

Post by **le_ryan** » Thu Mar 26, 2009 4:37 am

I have 2 lids left, but neither of them have the hardware (latches, hinges, lid prop) its just a lid, you would just need to swap over all your hardware .

Post by **MEAN1NGoFLIFE** » Thu Mar 26, 2009 4:46 am

ahh damn =[ . alright if anything ill let you if ill send it or not

S13 / S14 Cup holder arm rest

Re: (simmode1)

Re: (le_ryan)

Re: (chivalrybk)

Re: (le_ryan)

Re: (MN240SXDriv3r)

Re: (le_ryan)

Re: (BMAR240SX)

Re: (le_ryan)

Re: (le_ryan)

Re: (le_ryan)

Re: S13 / S14 Cup holder arm rest (le_ryan)

Re: (BMAR240SX)

Re: (le_ryan)

Re: S13 / S14 Cup holder arm rest (le_ryan)

Re: (le_ryan)

Re: (Azrial)

Re: (BMAR240SX)

Re: (Azrial)

Re: (le_ryan)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums