Man Jason, you said you were going to save one for me! =P

It's all good man, I'm working on a design, and I know that your going to continue to make these. Later Bro!

I have 1 left

Sick! Thanks Jason. I can't wait.

rotorimp wrote:Nick yours will be in the mail as well-One left

l0nestar wrote:Man Jason, you said you were going to save one for me! =P

I missed the delivery today cuz i was in class. FAIL... ill be waiting for it tmrw!

Hey Jason,

I paid you on Sunday night. Did one get shipped out to me? I never got notified.

Thanks,

Yep they all got mailed out Monday--I have delivery and insurance so they will definitely make it there.

One left!!

Any chance you could send me a tracking number?

Thanks Jason!

E-mail sent

i picked mine up from the post office today and installed it at work.... Sexy! Great fab work Jason! Pics will come soon


Modified by junior85z at 10:21 AM 1/29/2010

How have people been securing it to the firewall?Its imposable to get a strait shot at it with screw.I used 2 self tapping sheetmetal screws. I'm not sure how much strain they are going to hold. I just dont want them to pop out.

Bolt brace in place. Mark holes where brace bolts to firewall with a sharpie or 90degree pick. Take brace off. drill 3/8 size hole where your marks were. remove cowl. Bolt brace back in place and secure brace to firewall with correct size bolts. Reinstall everything removed

Damb.Thats a little more than I thought.Well I have had the cowl off before.For some reason I thought that, that spot on the firewall was un-reachable,(like was behind dash)I was suprised how chintzy the firewall is. there was a little gap between brace and wall, and the little sheetmetal screw easily pulled the wall to the beefy brace.

robertcoupe wrote:Damb.Thats a little more than I thought.Well I have had the cowl off before.For some reason I thought that, that spot on the firewall was un-reachable,(like was behind dash)I was suprised how chintzy the firewall is. there was a little gap between brace and wall, and the little sheetmetal screw easily pulled the wall to the beefy brace.

Do it the right way. Seriously, Sheet metal screw to bolt the brace the the firewall? You might as well used duct tape. Youre talking about sheet metal screws taking the stress transfered from the strut tower to firewall???? FAIL. Do it the right way

junior85z wrote:
Do it the right way. Seriously, Sheet metal screw to bolt the brace the the firewall? You might as well used duct tape. Youre talking about sheet metal screws taking the stress transfered from the strut tower to firewall???? FAIL. Do it the right way

s*** man, cool it. Thats why i asked. After I screwed it down, I thought this cant be right, I wonder what everyone else has done.

haha yeh sorry. Jus im not a fan of half a**. But do that and you shud be set.

Received!!!

Custom Fab FTMFW!

Hey mate,

how much more will it costs to ship this brace to germany?

I know it´s a little bit long, but i never saw anything like that. I want one of them!

The only thing is that i´ve got to move my ABS.But anything can be done....

byeAlex

robertcoupe wrote:Damb.Thats a little more than I thought.Well I have had the cowl off before.For some reason I thought that, that spot on the firewall was un-reachable,(like was behind dash)I was suprised how chintzy the firewall is. there was a little gap between brace and wall, and the little sheetmetal screw easily pulled the wall to the beefy brace.

Get in the cowl (where the wiper mechanism is) by removing the metal lower W/S trim and the plastic cowl vent grilles. Mark your holes carefully, drill them out, and use some good-size bolts and nuts with lock washers.

Put some anti-seize on the threads, since the bolts will be exposed to moisture under the cowl vents.

Hey Sulik-Send me a E-mail with your address and ill get you a shipping quote_Jason

Mail ist out.

You still have 1 left? I'll take it!! total shipped to 20902? email me at [email protected]

i take it theses are not being produced anymore? the stealth custom fab bar member told me to contact you because i have an rb swap
Modified by jrb92se at 2:00 PM 3/14/2010

I just sold the last one of this run yesterday-I'll do another run over the bext couple of weeks and post up when they are done. Keep checking back because they usually sell out quick

Thanks Jason

if you want ill paypal the money ahead of productuion so i dont miss out

I showed how it looked under the hood with the ka, how about a vg?

Hey, dibs on the next run!

ill deff take one when the next run is available email is [email protected]

anyword on another batch?

interested in this brace will keep an eye on this thread for newness