Post by
jonathan1173 »
https://forums.nicoclub.com/jonathan1173-u146856.html
Thu Dec 14, 2017 8:59 am
Ok, disconnected negative cable, unplugged air temp sensor from under air cleaner, set to 200 ohms, both terminals on harness plug reads 34-35, so both terminsls have continuity.
Read codes with scanner p1320 stored and p0340 pending ign. signal and cam pos. sensor. Cleared codes, re-ran test and now pending code p1130 swirl valve solenoid.
Next step is to do vac. test on valve, any particular port to connect test line onto valve? Test with engine off?
Having previously removed intake manifold when replacing head, i already know replacing valve/solenoid will be a p.i.t.a.
Thanks.