Rear camber links for less

Post by **Nismo_Freak** » Fri Feb 28, 2003 5:53 pm

Guys... anyone interested in some adjustable rear camber links for the S13 and S14? I am working on a set built in house that shares the same quality as Cusco but is cheaper. Currently its looking like I will be charging about $250 for a set of the links.

On the S13 we plan to create an S14 similar design that will make installation alot easier cause you dont have to remove the strut to fit the links.

The links would come with full English instructions on how to adjust them.

Let me know if anyone has any interest.

Also we are gonna powdercoat them so what kinds of colors do you guys like best? Black, Neon Green, Fuschia, Red?

Shoot me an email if your interested. Also if you want something else fabbed up lemme know and I'll see what we can do.

[email protected]

Post by **Nismo_Freak** » Fri Feb 28, 2003 5:53 pm

bump...

Post by **Nismo_Freak** » Fri Feb 28, 2003 5:53 pm

bump yet again... last time.

Post by **GodzillaFan** » Fri Feb 28, 2003 5:53 pm

material?mount type?dust boots?

thanks:)

Post by **Nismo_Freak** » Fri Feb 28, 2003 5:53 pm

its a heim joint, aka "pillow ball"

material is steel

dust boots ?? lol... its a link, not a shock absorber.

We may even offer different colors for powdercoating them to match your car or suspension. Being steel we could also have them chromed for you. Now chrome would be lovely!

Tig welded as well.

Post by **dreamsOfSkylines** » Fri Feb 28, 2003 5:53 pm

Is this an adjustable upper control arm? do you have pics? Will it clear most coil overs?

Post by **Nismo_Freak** » Fri Feb 28, 2003 5:53 pm

It is in design phase... and I just happen to have Tein coilovers so yes it will clear the coilovers. It will be fully adjustable, strong, and look nice. I'm just out to see how many people are interested. If there is interest we can design a set and have them out by the end of this month.

What kinds of colors would you guys like for the rods?

Post by **SRdS14** » Fri Feb 28, 2003 5:53 pm

FREAK!!! count me in on it...i have an s14....

i need a rear camber kit and i don't feel like paying 450 for cuscos...

you're the man...

~Scott

Post by **SRdS14** » Fri Feb 28, 2003 5:53 pm

bump this too

bump....

Post by **dreamsOfSkylines** » Fri Feb 28, 2003 5:53 pm

black or clear, keep it simple. No neon orange please. I'm interested but would like to see some pics (close ups of welds would be nice).

Post by **GodzillaFan** » Fri Feb 28, 2003 5:53 pm

The cuscos come with dust boots. dirt will get in the pillowball joint, and case it to wear prematurly

Website · Post by **JNM240** » Fri Feb 28, 2003 5:53 pm

I would be interested in a set of red for my S13 coupe. But it may take a couple of weeks to get the money together. But i am interested!

Post by **Nismo_Freak** » Fri Feb 28, 2003 5:53 pm

Godzilla... my friend ordered a set of the Cuscos for his S14 and he didnt get any dust boots. :dunno:

Either way ... good to see some interest. I suppose I could devise a small dust boot to cover the pillowball.

Post by **bj180sx** » Fri Feb 28, 2003 5:53 pm

have you tried the ones for a 300zx on there yet? They have almost the same subframe except some of the links are either longer or shorter. I really think it should work. I know the bushings are the same.

Post by **Nismo_Freak** » Fri Feb 28, 2003 5:53 pm

BJ180SX... if the link is shorter or longer then its no good. You would have to modify it to fit and still adjust to where you want it to.

Post by **Lepchitz1** » Fri Feb 28, 2003 5:53 pm

Im interested...and what the hell does bump mean? Ive been on here forever and still dont know what it means

Website · Post by **JNM240** » Fri Feb 28, 2003 5:53 pm

So are they going to look like this? :

Website · Post by **JNM240** » Fri Feb 28, 2003 5:53 pm

Because in all honesty, if you could do a pair like this i would be A LOT more interested!

Post by **Anand** » Fri Feb 28, 2003 5:53 pm

Lepchitz1 wrote:Im interested...and what the hell does bump mean? Ive been on here forever and still dont know what it means

bump means to bump the thread up to the top... so if you want to do that and have nothign more to add in the reply... just say bump.. get it now?

Post by **Exar-Kun** » Fri Feb 28, 2003 5:53 pm

battle bersiona already amkes a less expensive adjustable upper arm for the 240sx...

but yeah, Im interested..-chet

Post by **randybunctious** » Fri Feb 28, 2003 5:53 pm

bump, when can i get some for a s13?

Post by **96_S14_SE** » Fri Feb 28, 2003 5:53 pm

No Im not interested. But thats only because Im making my own

Only part I need to find / source is the threadded collar for adjustability...

Good luck none the less though...

Post by **Cyberkreig** » Fri Feb 28, 2003 5:53 pm

Interested, S13, Chrome or base-metal color

Rear camber links for less

Rear camber links for less

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums