Hi there sorry I am new to forum and have had no luck finding any info I am after. Don't want to waste peoples time if there is a forum on this but any info on this or sent in correct direction be great.
I have a r32 gtst and am about to upgrade engine to rb25 det neo. Buying engine and loom out of manual r34. Looking for wiring info for wiring dash etc into the 34 computer. Any help be much appreciated

So its a bit on the pricey side but wiring specialties makes a custom engine harness to swap a NEO engine into an r32. You can choose options like what stand alone ecu you want to run and upgraded MAF and so on.

http://www.wiringspecialties.com/rb25-n ... s-r32-gts/

Cheers yea ill look into that when I decide what I'm going to do to engine down the track but for now just get it up and running stock. Sure it can't be that hard but yea not finding much info on it.

There is tons of info online if you just search.
Google "rb25 neo into r32 wiring" and you'll have a bunch of links.
Not sure if you can link other forums here, but here's a quick one: https://www.sau.com.au/forums/topic/284 ... nversions/

Realistically all you need is a pin out for an rb20 and another for a neo and you should be able to figure it out. If you can't, don't be cheap and buy the wiring specialties harness that is plug and play and save yourself the trouble and headache.