RB Classifieds - RB engine Parts Only

Discuss the RB20, RB25 and RB26 series engines.
User avatar
chad b.
Posts: 311
Joined: Fri Nov 21, 2008 12:17 am
Car: chocolate chip kouki
Location: Mobile, AL

Post

Location: Mobile AL
Contact: 251-508-0914
Price: $1200 shipped anywhere in the US
For sale: AEM EMS 6620. This stand alone ECU will operate SR20DET, RB26DETT, RB25DET, RB20DET, VG30DETT, and CA18DET. It is the version 2 and supersedes part numbers 30-1620,30-1621,30-1622.

The ECU comes with Intake Air Temp sensor, MAP sensor, boost solenoid, and an AEM 30-4300 serial gauge (19 gauges in 1). This is everything you will need minus a wideband O2. The system is on my car and works fine. I bought the ECU new a year ago. All together this is well over $2k.


For another $200 I will throw in my ChaseBays wiring harness (rb25det into s14)


User avatar
chad b.
Posts: 311
Joined: Fri Nov 21, 2008 12:17 am
Car: chocolate chip kouki
Location: Mobile, AL

Post

^^^^^ sold

User avatar
meet07
Posts: 1189
Joined: Tue May 08, 2007 5:48 am
Car: 89 180sx rb25det
Location: North Carolina
Contact:

Post

I have a ton of parts that I have collected over the years. Some I kept for back ups and now I just want to clean up a bit. All prices are best offers and if you have any questions its best to contact me Via phone. You can call or just text and I will return the message.

Item:RB25det Freddy Intake Plenum
Description: Used without accessories
Price: $100.00 plus shipping
Pictures:
Image
Image

Item: RB25det IACV
Description: Used in working order
Price: $50.00plus shipping
Pictures:
Image

Item: RB25det Air Regulator
Description: Used and working
Price: $50.00 plus shipping
Pictures:
Image

Item: RB coil pack brackets
Description: I have 2 sets used
Price: $20.00 plus shipping
Pictures:
Image

Item: RB CAS Brackets
Description: used no cracks
Price: $20.00 each plus shipping
Pictures:
Image

Item: RB20,25,26 Water pump pulley
Description: Used not bent
Price: $10.00 each plus shipping
Pictures:
Image

Item: RB20,25,26,30 timing belt drive gear
Description: Used all teeth
Price: $25.00 each plus shipping
Pictures:
Image

Item: RB25det Timing belt covers
Description: Used
Price: $25.00 each plus shipping
Pictures:
Image

Item: RB25det rear main seal/bracket
Description: Used may want to replace seal
Price: $10.00 each plus shipping
Pictures:
Image

Item: RB25det oil pickup
Description: used screen no damage
Price: $25.00 plus shipping
Pictures:
Image

Item: RB20,25,26 knock sensors
Description: Working used
Price: $10.00 each plus shipping
Pictures:
Image

Item:RB25det VTC solenoid
Description: used and working
Price: $40.00 each plus shipping
Pictures:
Image

Item:RB25det oem head bolts
Description: used torqued once from factory
Price: $15.00 plus shipping
Pictures:
Image

Item:RB25det Intake with pod filter
Description: Blocked off plumb back for bov. 15hp increase. Used for stock t28 turbo or similar
Price: $50.00 plus shipping
Pictures:
Image

Item:RB20,25,26 Aftermarket Throttle Body 90mm
Description: same size as q45
Price: $30.00 plus shipping
Pictures:
Image

Item:RB25det Thermostat neck
Description: used and no cracks
Price: $15.00 each plus shipping
Pictures:
Image

Item:RB25det coolant hosed under plenum
Description: used and working
Price: $40.00 plus shipping
Pictures:
Image

Item:RB25det oil dipstick tube
Description: used
Price: $20.00 plus shipping
Pictures:
Image

Item:RB25det Alternator/brackets
Description: Used and working
Price: $60.00 plus shipping
Pictures:
Image
Image

Item:RB25det Alternator bracket
Description: used
Price: $10.00 plus shipping
Pictures:
Image

Item: AEM 6-1 Gauge part number: 30-4300
Description: New out of the box with all paperwork
Price: $100.00 plus shipping
Pictures:
Image
Image
Image

Item: RB25det CAS
Description: Used and working
Price: $50.00 plus shipping
Pictures:
Image

Item:RB25det O2 sensor
Description: just need pigtail soldered on
Price: $10.00 plus shipping
Pictures:
Image

Item:RB25det valve covers red
Description: used with no leaks
Price: $50.00 for both plus shipping
Pictures:
Image

Item:RB25det idle pulley and timing pulley
Description: used
Price: $15.00 each plus shipping
Pictures:
Image

Item:RB25det coil pack cover
Description: used
Price: $40.00 plus shipping
Pictures:
Image

Item:RB25det coil packs
Description: used
Price: $15.00 each plus shipping
Pictures:
Image

Item:RB25det coil pack harness
Description: working no cuts
Price: $40.00 plus shipping
Pictures:
Image

Item:RB25det fuel rail with 370cc injectors x 6
Description: without harness/ With Harness + 30.00
Price: $75.00 plus shipping
Pictures:
Image

Item: Fuel rail only
Description: used
Price: $25.00 plus shipping
Pictures:
Image

Item:RB25det oem t28 turbo with elbow
Description: Used, Making noise at 300hp, upgraded to bigger turbo
Price: $100.00 plus shipping
Pictures:
Image
Image
Image

Item:RB25det Aftermarket 3 inch Downpipe
Description: Used for stock tune when upgraded to AEM. Has maybe 3 hours. Wideband bung welded in place
Price: $75.00 plus shipping
Pictures:
Image
Image
Image

Item:RB25det OEM Clutch
Description: used with good looking pressure plate
Price: $40.00 plus shipping
Pictures:
Image
Image

Item:RB25det OEM Flywheel
Description: Good shape
Price: $40.00 plus shipping
Pictures:
Image

Contact:
E: [email protected]
M: 919-818-one eight sixty for

Thanks

User avatar
datsunmotorsports
Posts: 203
Joined: Sun Jan 14, 2007 3:50 pm
Car: 74 260Z , 71 240Z , 71 510 wagon , 68 Fairlady 2000, 82 Diesel Maxima
Contact:

Post

Location: Prunedale CA 93907
Contact: 831-402-5387
For sale:
-2 RB25 transmissions $900 ea
-4 RB25DET cylinder heads $40, $250, $300, & $500
Image
-6 FMIC underversal $100-200
-4 or 5 RB25 valve cover sets $40 set
RB25de coil cover $50
-2 RB25det coil cover $50
aftermarket vented RB25det coil cover $50
-ISIS intake with RB25det injectors, Q45 TB, coolant passage, IAC, etc ready to bolt on $350
-Greddy intake also loaded with all parts ready to bolt on $900
-RB25/RB20 stock exhaust manifolds $40 ea
-Toyosports tubular Side mount RB25/RB20 exhaust manifold external 38mm wastegate plumbed. $300
-2 or 3 RB25det cam shafts(pairs only) $100 ea
-2 RB25det short blocks (pretty bare) $200 and $300
-4 PS pumps(these are for non-hicus) $100 ea

Shipping: Yes anything USPS will accept at cost to buyer.

RB24D
Posts: 182
Joined: Mon Jun 02, 2008 3:47 pm
Car: 1996 rb25det 240

Post

All parts sold mods please delete post thanks .
Last edited by RB24D on Sat Feb 08, 2014 1:46 pm, edited 5 times in total.

outlaw7
Posts: 19
Joined: Mon Aug 13, 2012 10:16 pm
Car: 78 zed
Location: New Jersey

Post

RB24D wrote:Seth Ellwood
Columbia SC
Eight 03-587-5896
For sale
Rebuilt , match ported and polished head with intake stud kit still in bag 1,200 obo
Stock pistons 50
Freddy intake gasket match ported to head and powdercoated black never bolted up 250
2 sets of acl bearings 50 ea
1 ni oil pump in box 50
1 n1 water pump in box 50
1 stock water pump new no box 40
1 stock oil pump not in box new 40
Crank balanced shot peened cryo treated crank collar install never bolted back in 350 obo
block 20 over never bolted up after machine work 250
ac compressor with lines 75
alternator 40
starter 40
Wiring specalitys s14 rb25 series 2, 325.00
Painted valvecovers and spark cover with new gaskets 100
Painted timing covers 50
Gt40r (bad center section 150
ps pump for non hicus 50
ss down pipe 20

A ton of other items just ask I no longer have a need for any of this stuff
If some one is local and interested in the whole lot I will make them a screaming deal. I will try to get pics up this eve or tomorrow. I do not have a data plan on phone so no text.
Perfer local pickup for large items or can try to ship at buyers expense
I called you about the parts im interested in.

Dave

RB24D
Posts: 182
Joined: Mon Jun 02, 2008 3:47 pm
Car: 1996 rb25det 240

Post

got msg will contact today.

User avatar
sickness14
Posts: 667
Joined: Wed Dec 31, 2008 6:16 pm
Car: 95' S14 SE. RB25 Neo. ARP, Tomei 260's, HX40 Pro, PFC, Synapse, Greddy
Location: Raleigh, NC

Post

delete
Last edited by sickness14 on Tue Feb 25, 2014 8:41 pm, edited 1 time in total.

Largekid
Posts: 331
Joined: Mon Jun 23, 2003 11:24 am
Car: '96 RB S14 SE, '04 LS6 CTS-V

Post

SOLD!



Name: Andrew B
Location: Indianapolis, IN
Contact: 317. nine seven nine. 35 zero two, PM on here, largekid02 at yahoo email
Price: $1050 Shipped

I am currently upgrading to a Haltech Pro and am getting rid of my current ECU setup. Apexi Power-FC L-Jetro (MAF version). It will come with the ECU, Handheld Controller, N62 MAF w/ pigtail, and Apexi Power Intake. Everything was working fine when the car ran last. Any questions, please contact me and i'll do my best to answer.

http://i198.photobucket.com/albums/a...pshvjuicfv.jpg
http://i198.photobucket.com/albums/a...psfpsmxb7s.jpg
http://i198.photobucket.com/albums/a...ps4zdlpmal.jpg
http://i198.photobucket.com/albums/a...ps7d7wugqt.jpg
http://i198.photobucket.com/albums/a...psychtr1sp.jpg
Last edited by Largekid on Sat Mar 08, 2014 2:12 pm, edited 2 times in total.

User avatar
sickness14
Posts: 667
Joined: Wed Dec 31, 2008 6:16 pm
Car: 95' S14 SE. RB25 Neo. ARP, Tomei 260's, HX40 Pro, PFC, Synapse, Greddy
Location: Raleigh, NC

Post

ocation: Houston TX
Will ship at buyers expense
Contact by text or email
[email protected]
919-604-0494

Thanks!

R33 GTR RB26 power FC L-jetro with map sensor kit and EL commander for 1100 obo

ATI balancer for the R33 GTR RB26 motor 350 obo

RB25 Neo AWD stagea block, rb26 rods, Neo pistons, Neo crank (needs new keyway machined) N1 oil pump , oem water pump, RWD Pan and pickup modded $500

2 quart Accusump with elec solenoid $150
4" aluminum 90 degree intake pipe and 4" K&N filter $100
40mm synapse wastegate $150
3.5 to 3" downpipe for top mount rb25 , 200

outlaw7
Posts: 19
Joined: Mon Aug 13, 2012 10:16 pm
Car: 78 zed
Location: New Jersey

Post

WTB RB26 coil cover if anyone has one lying around.

G-E
Posts: 129
Joined: Thu Aug 09, 2012 1:28 pm
Car: 1. 1987 300zx Turbo-swap, SF interior, koni rallisport springs/struts, msa swaybars
2. 1997 Sebring coupe
3. 1987 300zx 2+2 becoming a caged racecar with RB swap...

Post

Located in balmy Toronto
Contact by PM pls

RB25 NEO stuff is all very minty, only 28k kms, here's what's left:

a/c stuff, lines are good, compressor is clean, no bearing noise - $80 obo
Image

almost perfect alt, the pulley hit the rad support on mockup so it has a slight dent, on the outer lip, fixable - $60 obo
Image

oem turbo divided manifold, with heat shield, soot is from a loose turbo stud, no cracks - $offer
Image
Image

fresh engine mounts, no cracks in rubber - $40 obo
Image

Largekid
Posts: 331
Joined: Mon Jun 23, 2003 11:24 am
Car: '96 RB S14 SE, '04 LS6 CTS-V

Post

Updated! ^

User avatar
kevwa
Posts: 281
Joined: Wed Sep 12, 2007 7:42 am
Car: 95 Chevy S10 RB25DET

Post

All parts are factory from RB25DET S1

Exhaust manifold -$40
Intake maniold - $40
Throttle body - $30
Fuel rail with stock injectors - $45
Turbo elbow - $15
Downpipe - $20
ECU - $100

Location: Syracuse, NY
Will ship all parts, buyer pays actual shipping cost
Best contact call/text 3157445589

User avatar
chad b.
Posts: 311
Joined: Fri Nov 21, 2008 12:17 am
Car: chocolate chip kouki
Location: Mobile, AL

Post

X-TuN wrote:Contact: [email protected] text: 352-325-1146 or PM me
Location: FL


RB26DETT Mitsubishi CAS (Cam Angle Sensor), not Hitachi
fits RB20/RB25(non-NEO)/RB26 $70 shipped

RB26 Exhaust Flanges (DIY Manifold) $45 Shipped

Image

Image

I need that CAS. I sent you a text.

Duke89
Posts: 29
Joined: Thu Oct 07, 2010 8:33 pm
Car: 11/88 cream yellow/gray two tone RB20 project

Post

WTB good OEM rb20det cams. Msg me or txt me with pics and price.

John - 931-334-1337

User avatar
Greenblurr93
Posts: 131
Joined: Fri Mar 20, 2009 4:34 am
Location: The Sun

Post

Name: James H
Location: Mesa, AZ
Contact: PM
Price: $1200 Shipped

Cleaning out some old parts and stumbled across this sweet looking box.
Image
Opened it up to find a pleasant surprise, a brand new, AUTHENTIC Greddy Intake Manifold!
Image
Image
Image

$1200 SHIPPED within the continental US

User avatar
chad b.
Posts: 311
Joined: Fri Nov 21, 2008 12:17 am
Car: chocolate chip kouki
Location: Mobile, AL

Post

Need an S1 (Mitsubishi made) RB25 CAS.

HMU
251-508-0914

RRRRB
Posts: 758
Joined: Wed Jun 01, 2011 9:31 am
Car: 98 RB powered S14
Location: WA

Post

RB30 pistons and rods, everything in great shape piston skirts are flawless.

Complete set.

$200 Make an offer

Image

whoareu
Posts: 163
Joined: Fri Aug 01, 2008 6:09 am
Car: 1993 rb25det s2 240sx vert
Location: Beaufort, SC

Post

WTB - i need a pulley from an rb25 alternator... i have the quest alternator but its a 4v pulley and slips occasionally. and i read that the rb25 alt pulley will swap right on. if anyone knows of one or has one for sale it would be much appreciated. or any info as to any other pulleys that will swap right on. the noise when it slips is unbearable.

Abe23
Posts: 1
Joined: Mon Apr 14, 2014 8:37 pm
Car: 98 240sx

Post

I have a couple of Rb parts for sale accepting reasonable offers I'm willing to ship at buyers expense.

Abe B.
Contact: 305.546.9669
location: Miami, fl.

item: RB26 nistune
ship: yes
PRICE: $450

Rb26dett ecu with brand new Nistune board also has cable for laptop.
Image

Item: Rb wasted spark setup
Ship: yes
Price: $125
Setup was used on a rb26 has grand national coil pack with Accel aftermarket wires.
Image

Item: Rb26 igniter
Ship: yes
Price: $100

Removed from a running car in good condition.
Image

Item: Rb25 starter
Ship: yes
Price: $80

Pulled out of a running car.
Image

Item: Rb26 harness
Ship: yes
Price: $125

Harness was converted for a s13 but was never installed don't know if it works.
Image

Item: Rb blitz filter
Ship: yes
Price: $60

Had this on my rb25 works great.
Image

User avatar
USMCgetsome
Posts: 2030
Joined: Wed Apr 14, 2004 7:38 pm
Car: OWN S13.5 RB25DET/2003 G35
Contact:

Post

WTB SHIFTER GUIDE BUSHING/PLASTIC WITH 2 GUIDE PINS.
PART NUMBER 32850

240z4u
Posts: 2071
Joined: Mon Feb 21, 2005 4:47 am
Car: '95 Nissan 240SX

Post

Plug and play LS coil swap for S2 RB25DET.

post4887481.html?hilit=LS%20coils%20another#p4887481

That setup is for sale. I'll include the coils (8 total), bracket, harness and a set of OEM LS plug wires which are too short for this application. You could likely use the special terminals and boots on universal wires. I'll include whatever I have around for plug wires as well. $150 shipped in the conus.

EMAIL or PM me, I don't come into this forum too often anymore.

Evan

User avatar
Coolwhip
Vendor
Posts: 3138
Joined: Fri Feb 06, 2004 7:29 am
Car: RB26 Raw Brokerage War Machine
Location: Orlando, FL
Contact:

Post

We're overstocked with "oversize" ACL bearings for all RB20 RB25 RB26 and RB30.

If you need bearings hit us up with the motor and sizes you need. [email protected]

:mike

rb280z
Posts: 3
Joined: Wed May 19, 2010 10:43 pm
Car: 1976 280z rb20det hx35 holset

Post

Deatschwerks 650cc direct drop in injectors for rb20det. I put them on ebay http://www.ebay.com/itm/Deatschwerks-In ... cf&vxp=mtr

User avatar
gnubberlang
Posts: 37
Joined: Sun Feb 16, 2014 3:57 pm
Car: 1995 240SX SR20DET
2004 Frontier 4x4 Crew Cab 5-Speed
Location: Denver, CO
Contact:

Post

WTB RB20DET stock 270cc injectors

RRRRB
Posts: 758
Joined: Wed Jun 01, 2011 9:31 am
Car: 98 RB powered S14
Location: WA

Post

FIC 900cc injectors (same as ID1000's) great shape, comes with everything needed 10k miles pump gas ran thru them only

these cost 625 new

asking 460 shipped

Image

User avatar
breadbox
Posts: 8550
Joined: Tue Oct 17, 2006 4:09 pm
Car: Red 89 240sx,Black 89 Koop, White 84 720 4x4KC
Location: Va Bch

Post

Need some motor brackets for an RB20. Hopefully some one here has an extra set.

KavVeMan
Posts: 50
Joined: Sat Oct 19, 2013 1:52 pm
Car: 1991 240sx rb25det swap
Location: utah

Post

still got those splitfires? and are they for an s1 rb25?

Nesquick
Posts: 393
Joined: Wed Oct 15, 2008 5:59 pm
Car: Rb26 Kouki Silvia

Post

FS:
12x RB26 Coil packs and Coil Pack Harness - $10 each, harness = $30
Stock R33 GTR Turbos - $100 each
2x J60/Z32 MAFs - $60/per (IN FANTASTIC CONDITION)

Shipping and PayPal Fees Extra.

Let me know


Return to “RB20DET / RB25DET / RB26DETT Forum”