Raw Brokerage - Your Online RB Parts Source!

Post by **Mountain_manC33** » Mon Aug 17, 2009 11:15 pm

rb20 ecu?

do you gots any?

new page is bad a** btw.

Post by **black240jl** » Tue Sep 08, 2009 5:39 pm

how much for rb20 stock oem lower intake mani? and also do u have or can make a ss line oil/water lines for an rb20 like a kit or somethnig lmk man thanks alot

Post by **sickness14** » Wed Sep 09, 2009 3:00 am

Hey ricky its John, I need a set of 87mm RB26 CP Pistons. I've got a guy on ebay that will do $745 plus $20 shipping. Can you match / beat this? Id rather buy from you.

Let me know, my email is [email protected] if you would like to PM me. Thanks

Post by **sickness14** » Wed Sep 16, 2009 5:53 am

Thanks Ricky. I'm just waiting for them to show up now. I'll need some more parts pretty soon, i wanted to shoot you some of the things i need ahead of time so you can let me know if your able to get them. also, if you see anything on this list that you recommend i change manufacturer or part type, please don't hesitate to let me know.

1 Nissan RB25DET OEM Gasket Kit $206.001 Tomei RB25 Metal Head Gasket $330.001 NGK RB Spark Plug Set $24.881 Greddy RB25DET Top Feed Fuel Rail $280.001 Precision Fuel Injector Set $467.94 (will these work with the power fc without wiring in a resistor pack?)1 AEM Universal Fuel Pressure Regulator $193.731 Nissan OEM RB25DET Clutch Slave Cylinder $59.001 Stainless Clutch Line for Nissan 240sx $35.001 FujiiSPL RB20/25 Power Steering Hose $75.00

Subtotal $1,671.55Tax $0.00Order Total $1,671.55

and i also need the following which is not on your site.

ACL Race Main Bearing Set 7M2428H/X Nissan RB26DETTACL Race Rod Bearing Set 6B2960H/X RB26DETT RB25 DETDeatschwerks Injectors - Nissan Skyline RB25DET NEO [DE-RBneo-800-6]

(pull type clutch?) do you have any clutches that i would not have to convert my trans to work with? i want to keep the oem pull style such as:

NM042SD: Exedy Twin Plate Clutch Kit w/ Flywheel, 2205 clamping load. Wheel Torque Rating 430 lbs./ft, 500-750whp

Thanks! your the man.

Modified by sickness14 at 9:16 AM 9/16/2009

Post by **Coolwhip** » Wed Sep 16, 2009 10:54 am

Mountain_manC33 wrote:rb20 ecu?

do you gots any?

new page is bad a** btw.

might have you covered

black240jl wrote:how much for rb20 stock oem lower intake mani? and also do u have or can make a ss line oil/water lines for an rb20 like a kit or somethnig lmk man thanks alot

John, shooting you an email.

sickness14 wrote: i wanted to shoot you some of the things i need ahead of time so you can let me know if your able to get them. also, if you see anything on this list that you recommend i change manufacturer or part type, please don't hesitate to let me know.Thanks! your the man.

John #2, Shooting you an email as well

Thanks

Post by **sickness14** » Thu Sep 17, 2009 4:40 am

Thanks, email received and replied to.

Post by **NewYorkCoupe** » Mon Sep 28, 2009 5:03 pm

Hey Ricky, Do you have any r33 crossmembers right now? I dont want to deal with all the "conversion mount kit" crap.

Post by **black240jl** » Tue Sep 29, 2009 2:17 pm

hey man never got the email from ya, just seeing whats up , lmk thanks

Post by **Coolwhip** » Tue Sep 29, 2009 2:35 pm

thanks for the reminder... just emailed ya

Post by **datsunmotorsports** » Mon Oct 05, 2009 6:01 am

RICKY ROCKS

I had some problems with my old S2 coils. Ricky hooked me up PHAT!I bought a set of the SS coils for my S2 RB25DET. Car is running great! My missfires are all gone even with a heavy load I still have good spark.

Its time to make a second baseline dyno run and see how Im doing.

Thank You Ricky! I look forward to making future purchases with Raw Brokerage!

Ray

Post by **bspeed_il** » Tue Oct 06, 2009 6:08 am

Just put in an order for a radiator and a few other little things. Looking forward to the shipment

Post by **black240jl** » Fri Oct 09, 2009 11:59 am

hey ricky , i have an rb25 turbo on my rb20, im wondering if the circut sports turbo line kit would work, i think it would?

Post by **LostReality** » Fri Oct 09, 2009 5:15 pm

Hey Ricky, this is Brian. Look forward to seeing this Intake manifold. I missed delivery today. Hoping to get it tomorrow. Thanks again for the good business and look forward to working with you further.

Post by **black240jl** » Sat Oct 10, 2009 11:45 am

LostReality wrote:Hey Ricky, this is Brian. Look forward to seeing this Intake manifold. I missed delivery today. Hoping to get it tomorrow. Thanks again for the good business and look forward to working with you further.

did u get the rb20 highcapicity intake mani? i got to see it once lol but it didnt fit with my right hand drive darn lol so i had to send that b back ha

Post by **sickness14** » Fri Oct 16, 2009 6:28 am

ricky, left you a voice mail.

-John

Post by **LostReality** » Wed Oct 21, 2009 5:47 pm

black240jl wrote:did u get the rb20 highcapicity intake mani? i got to see it once lol but it didnt fit with my right hand drive darn lol so i had to send that b back ha

Yes, that's the one. I'll post up installed pics, but it will be a while before I get to it. It is part of some future plans.

Post by **black240jl** » Fri Oct 23, 2009 9:25 am

cool, ricky im needing some studs and yokes and washers and nuts for my rb20, think u can help. lmk thanks

Post by **EJ8 944** » Wed Oct 28, 2009 3:15 pm

Could you get me a pair of R33 RB26 MAF's? also, the stock flywheel, and 1 stock turbo?

Post by **touge whore** » Tue Nov 03, 2009 5:54 am

do you have any p/s pumps and p/s pump tensioners? for a rb20

Post by **Coolwhip** » Thu Nov 05, 2009 10:14 am

touge whore wrote:do you have any p/s pumps and p/s pump tensioners? for a rb20

RB25 and RB26 pumps are in stock, nothing for a RB20

EJ8 944 wrote:Could you get me a pair of R33 RB26 MAF's? also, the stock flywheel, and 1 stock turbo?

From the list I'll check and see if we have a stock flywheel still. Other parts we do not. The MAF's as you may find are hard to come by.

black240jl wrote:cool, ricky im needing some studs and yokes and washers and nuts for my rb20, think u can help. lmk thanks

working on our own exhaust stud kit. RB25/20 will be first to come. Stay tuned.

Post by **EJ8 944** » Thu Nov 05, 2009 1:32 pm

Coolwhip wrote:
From the list I'll check and see if we have a stock flywheel still. Other parts we do not. The MAF's as you may find are hard to come by.

Let me know on the flywheel. Yeah I am finding that R33's mafs are few and far between.

Post by **sickness14** » Fri Nov 06, 2009 3:54 am

hey ricky, i put in an order on your site for an RB25 engine gasket kit finally! let me know when you have shipped it out. thanks man!

ttyl,John

Post by **Coolwhip** » Fri Nov 06, 2009 11:45 am

sickness14 wrote:hey ricky, i put in an order on your site for an RB25 engine gasket kit finally! let me know when you have shipped it out. thanks man!

ttyl,John

Got ya covered

Post by **Tofubadguy** » Wed Nov 11, 2009 10:17 am

Any crank collars yet? I'm getting closer to needing one. Thanks.

Russell

Post by **DJButton** » Wed Nov 11, 2009 6:03 pm

Ricky,

Think you can find me some Spitfire Coils, or any other aftermarket coils. My stock coilpacks are all breaking up at higher RPM's now.

Post by **Coolwhip** » Thu Nov 12, 2009 3:11 am

DJButton wrote:Ricky,

Think you can find me some Spitfire Coils, or any other aftermarket coils. My stock coilpacks are all breaking up at higher RPM's now.

Got you covered Dan

Post by **Coolwhip** » Thu Nov 12, 2009 3:12 am

Tofubadguy wrote:Any crank collars yet? I'm getting closer to needing one. Thanks.

Russell

Crank collars are being made, along with more pulley sets so expect them soon

Post by **synergy** » Sat Nov 14, 2009 6:02 am

Hey ricky last time we talked my car was all sortof of messed up. Well i fixed it got all the issues adressed and boom Main bearing siezed up

Do you have any bearings and i dont know alot about good ones and bad ones and whats needed and whats not. I dont know if proformance ones will hurt reliabilty or gas mileage but i want something to last and last at 400hp which isnt too much to ask out of a bearing i hope.

Post by **ANVIL** » Fri Nov 20, 2009 6:26 am

Ricky I'm trying to locate a cheap stock exhaust cam for my rb25det s1. Needs to have the cas key. Shoot me an email let me know what u can do. Thanks

Post by **EJ8 944** » Fri Nov 20, 2009 3:00 pm

Any chance you've come across a set of RB26 mafs?

and maybe you can help me on my search, are all RB26 maf's N70's?

Raw Brokerage - Your Online RB Parts Source!

Re: Raw Brokerage - Your Online RB Parts Source! (Coolwhip)

Re: Raw Brokerage - Your Online RB Parts Source! (Mountain_manC33)

ATT: Ricky

Re: ATT: Ricky (sickness14)

Re: Raw Brokerage - Your Online RB Parts Source! (Mountain_manC33)

Re: Raw Brokerage - Your Online RB Parts Source! (Coolwhip)

Re: Raw Brokerage - Your Online RB Parts Source! (sickness14)

Re: Raw Brokerage - Your Online RB Parts Source! (NewYorkCoupe)

Re: (Coolwhip)

Re: (datsunmotorsports)

Intake Manifold

Re: Intake Manifold (LostReality)

Re: Intake Manifold (black240jl)

Re: Intake Manifold (black240jl)

Re: Intake Manifold (LostReality)

Re: Intake Manifold (black240jl)

Re: (touge whore)

Re: (Coolwhip)

Re: (EJ8 944)

Re: (sickness14)

Re: (Coolwhip)

Re: (Tofubadguy)

Re: (DJButton)

Re: (Tofubadguy)

Re: Raw Brokerage - Your Online RB Parts Source! (Coolwhip)

Re: (ANVIL)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums