R50 3.5 lower plenum
-
Grumpychef1976
- Posts: 9
- Joined: Sun Feb 07, 2021 3:26 pm
- Car: 2003 Nissan Pathfinder SE
R50 3.5 lower plenum
Noob question. Hi y'all I've been working on a 03 r50 as a project basic mechanical skills I got the whole top off and down to valley redid pigtail and knock sensor pcv valve plugs and power screw valves both valve cover gaskets. I'm stuck on resemble rail back on I'm stuck on the lower plenum what line connects on the long fitting at the back of lower plenum closest to fire wall thanks for all replies
-
mdmellott
- Posts: 1269
- Joined: Mon Sep 02, 2019 3:32 pm
- Car: '13 Kia Soul+ 2.0L AT
'02 Pathfinder SE 3.5L AT P/4WD - Location: SF Bay Area, CA
Re: R50 3.5 lower plenum
The small diameter metal tube attached to the lower plenum, which points toward the PCV valve, has a short hose that connects the end of that tube to the PCV valve.
-
Grumpychef1976
- Posts: 9
- Joined: Sun Feb 07, 2021 3:26 pm
- Car: 2003 Nissan Pathfinder SE
Re: R50 3.5 lower plenum
Ty mdmellott got it. was working late and should have walked away for the night. got it now much appreciated thanks again
-
Grumpychef1976
- Posts: 9
- Joined: Sun Feb 07, 2021 3:26 pm
- Car: 2003 Nissan Pathfinder SE
Re: R50 3.5 lower plenum
Forgot I had to cut a new hose cause it was deteriorating needless to say it got moved by the girlfriend and I forgot all about it doh. .
-
mdmellott
- Posts: 1269
- Joined: Mon Sep 02, 2019 3:32 pm
- Car: '13 Kia Soul+ 2.0L AT
'02 Pathfinder SE 3.5L AT P/4WD - Location: SF Bay Area, CA
Re: R50 3.5 lower plenum
Yep. Been there.. Done that.Grumpychef1976 wrote: ↑Wed Oct 13, 2021 10:05 am... was working late and should have walked away for the night.