QUICK! How do I remove the grill?

[aebstract]

Two screws out, obviously. How do I get the clips along the bottom to pop out? They don't seem to easily go straight out and when I push down/pull up and try to slide out it doesn't seem to budge that way either. Wanting to get it out like right now, respond quickly if you can please. Thanks

[aebstract]

Looks to be a bunch of those clips, I guess they pull upwards. Saw one on the side, looks like theres a bigger clip up at the top corners that holds it to the bumper? meh >.<

[bakerboard]

Crap i cant remember how i did it but those 2 screws come out easy and then i think you have to push up beneath the clip-like-things on the bottom. I have the grill right in front of me and there are about 6 of them. If this helps ill post some pictures up of what im talking about in a moment.

[bakerboard]

There is one of these on each end too-->

[aebstract]

Okay, so just do the 6 big clips, and then theres two in the top corners, you have to use needle nose for?
Modified by aebstract at 4:32 PM 12/11/2009

[bakerboard]

yea im pretty sure thats all that is holding it down. I cant remember if i used my hands or some plyers but if you cant do it with your hands use the needle nose plyers.

[aebstract]

Those two top parts are going in to a little box on the bumper and I don't think fingers can even fit in there lol. I'll try, hope I get it. Will update thread in just a bit. Thanks for the info, now I know its just the 8 clips and no extras!

[aebstract]

Okay so the top two clips I figured out, flat head screw driver and pop it upwards. I might make a tut on the whole process later. Anyway, those bottom ones aren't budging. It's all in figuring out how they work, cause the top ones once I figured it out came out easy. The bottom just pulls up? They don't seem to move up or down. Hrmmmm

Oh and that f***in piece that snaps in the two holes for screws, one of em I dropped >_< lol

Gotta get those damn tabs out! Do you remember anything about how they came out?

[aebstract]

Success! I had to be somewhat forceful with it though.. Couldn't feel the screw thing down under the engine anywhere I could reach. Not sure where it went, is it easily replaceable? Off to the store then up to the shop to get to work!

[ABNRML4U]

Yeah, Very nice to see Backerboard to help you out. Plus he is a FLa NicoClub Member too.

[bakerboard]

i totally forgot you had a spec v.. the grill might be setup a whole different way but glad to see you got it off.

[aebstract]

I think it's the same. Once I saw the pictures I remembered you didn't have a spec. I think it's the same setup though, pain in the a**. Painting now! Almost done with primer!

[aebstract]

Tada.Car is super dirty atm and bad quality pictures. Might go take some photos later this afternoon.