htbyrico wrote:yes sir !! funny i thought i was the only one good to see we have the same taste...
here my friends link.. they bolt right on.. and all you need is cut some of the heat shield and new brake lines..rabsusa wrote:htbyrico wrote:yes sir !! funny i thought i was the only one good to see we have the same taste...
Sir,
your brake ugrade,(JDM NISSAN 30MM 4 POT ALUMINUM ) was that a direct bolt on or is there need of modifications? are you using std q4 rotors?
rabs
anytime baby girl !!LYDS wrote:I am so jealous, but I will be calling you to take a trip down to So Cal next time I take my car apart.
yes i have heard of that.. but the only reason that vh45 likes ngk is because they good on burning oil ... so that leaves with one thing.. if you putting high pulstar spark plugs make sure you check you vale stem seals.. and piston rings.. i did everything i could for my engine.. as you seen no slug therefore i have 189 psi com on 6 piston and the rest are around 176.. vales stem seals look very good but the real test is carb cleaner spray it clean them off and spray again to see if you have any seeping on the vale.. mine passed with flying colors.. thanks for the advice but just to let you know i do everything by the book...just don't tell everyone cause i don't want to write a book on here..Ozzie wrote:Looks like I got to this thread too late to tell you....
The VH45 tends to only like NGK platinum plugs.
Other people have had issues with bosch plugs and pulstars in the past.
im soo ready to be done with it.. after all this hard work me and my girl taking the president to the east gulf cost for a vacation.. well i did more work.. will be posting on trans and sub frame soon.. stay tunedEuphoricsoul wrote:Can't wait to see the finished product!
i do have one just want mine to be different for now..and the blue hose is high performance 300 psi hose.. can be used for water, fuel and oil.. that's the only color they had.. thinking about to at least changing the pcv hoses..still looking for the cover..Infinitiguy19 wrote:Why not get the real Nissan emblem on the plenum? 14041-66U00- or 14041-66U10- Not available from US dealers though.
Should also look into the finned diff cover...
Why blue hoses all over the place?
htbyrico wrote:im sexy and i know it...
sorry bout not getting back with you.. i put the word in but that part is hard to come by.. my cousin is in japan so he's been looking nothing yet unless you find one on yahoo japan its going to be a hard find bro.. as soon as i find one ill let you know..Infinitiguy19 wrote:What about the Master Cylinder?
Any luck on the bumper from the PM?
no need the change the master cylinder.. so everyone know the stock Q45 front brakes are 32mm so your really down gradingInfinitiguy19 wrote:What about the Master Cylinder?
Any luck on the bumper from the PM?