PROJECT DATSUN: SR20det 510

Post by **Masterdebater** » Sun Sep 02, 2007 8:23 pm

so a modified crossmember or just an s13 one

Post by **S13Teddy** » Sun Sep 02, 2007 9:32 pm

I believe its a stock S13 Xmember and as mentioned, 1600 mounts let the engine sit lower.

But I'm not speaking out of experience so..

Post by **ca18datsun510** » Sun Sep 02, 2007 10:14 pm

510 crossmemer, reversed.

custom trans crossmember.

blah blah blah, go to the first page and look?

i know its hard, but take 2 seconds to look before asking questions like that, it is a build thread after all.

Post by **Masterdebater** » Mon Sep 03, 2007 8:54 am

haah are u following my posts just to try to be annoying? he didnt have a problem answering my question, so why question it? i know its hard, stay out of other ppl convos thank u for the information too. was that so hard?

ca18datsun510 wrote:510 crossmemer, reversed.

custom trans crossmember.

blah blah blah, go to the first page and look?

i know its hard, but take 2 seconds to look before asking questions like that, it is a build thread after all.

Post by **ca18datsun510** » Mon Sep 03, 2007 9:55 am

im not following you around dope.

check my sn, i follow 510 builds, and the ca section.

stop making bs posts if you dont like it.

Post by **Masterdebater** » Mon Sep 03, 2007 10:14 am

im not making bs posts i gave info and said dont quote me on the whole ca tranny thing so it gave the kid something to go with. no one has a problem with it but u. if the OP of this topic doesnt want me asking questions i invite him to tell me so. otherwise, YOU are the one starting an argument thus, YOU are the one ruining the OP's topic. u shouldnt have said anything in the first place or at least said it in a grown up manner.

Post by **xyzalvarez** » Mon Sep 03, 2007 10:16 am

more pics , please...!

Post by **Masterdebater** » Mon Sep 03, 2007 10:48 am

yea did u figure out a solution to the fuel rail clearance? i hope my ca looks as good in the 510. im going to go get 2 of them this week so ill be followin behind u mesojdm!

Post by **simarkbotak** » Mon Sep 03, 2007 2:35 pm

Dude, what's happening to the car, have you sold it or something? I saw something similar to your build being sold in one of the forums.. Is this true??

Been a really long time without updates..

Post by **mesojdm** » Tue Sep 04, 2007 5:50 pm

hi guys-Master- You can use stock 510 x-member just "flipped", need to fab up a tranny x-member, need to shorten your driveshaft, and then all the wiring and plumbing comes into play.

Car is not sold!!! I could never do that with all the workin going into it. Im currently under the gun to get it done in time for Japanese Classic Car show(oct) down in so-cal. I want it done for its first appearncehehe

Post by **Masterdebater** » Tue Sep 04, 2007 6:47 pm

thank u sir

by flip u mean just LITERALLY flip it and bolt it back on or is welding needed? ive never actually seen what the x-member looks like im goin this friday to pick up 2 datsun 510s haha so ill have one to tweak and one to sell so im just getting all the info before hand and its nice to have it from someone goin through it right now rather than old info.car is looking good too man lovin the work!BTW throw me some details on where/when that car show is and ill be there

Post by **ace0073** » Wed Sep 05, 2007 7:08 am

pics from 05 show:http://www.cardomain.com/event/2005/10/01/JCCS

flyer for this year:http://www.japaneseclassiccarshow.com/

if you want info on a swap...let me know and we can talk in person or on phone.....just email me.

Post by **Fuel4Blood** » Wed Sep 05, 2007 8:38 am

Damn this 510's gonna be sweet. Mad props so far man, can't wait to see the finished product.

Post by **EvoRay** » Wed Sep 05, 2007 4:14 pm

damn it stew!! ur gf always gets u kickass presents!!!!! now go update ur build thread on NCE too!!!!

Post by **Masterdebater** » Wed Sep 05, 2007 4:57 pm

good stuff man im definately goin...thanks for the info on thathopefully my 510 will be nice too. but with a CA in it lmao

Post by **SR 240Z** » Fri Sep 21, 2007 12:59 pm

hey mesojdm i just sent you an email asking about the overall dimensions of your new intercooler setup...

You can reply to my email or reply back to this thread if you can please.

thanks,alex

Post by **Masterdebater** » Mon Sep 24, 2007 8:35 am

how much for that 240z^^^ and where u located?

i hate how this site doesnt have pms so im sry for asking on ur thread...AGAIN mesojdm. i guess ppl just love ur thread haha

Post by **SR 240Z** » Mon Sep 24, 2007 8:59 am

sorry i sold it, just havent updated my sig.

mesojdm update already!!!

Post by **jnuanz382** » Sun Oct 07, 2007 7:22 pm

where did u buy the bride fabric.........thanks nice car....and what car and year did u use for crossmember...thankss

Post by **theharlequin** » Mon Oct 08, 2007 7:32 am

The crossmember came from http://www.datsport.com, which has the conversion kit for sr into 510. The fabric can be found on ebaymotors...for a hefty fee

Post by **mesojdm** » Mon Oct 08, 2007 5:58 pm

more to come!

Post by **Logan76** » Mon Oct 08, 2007 6:34 pm

I bet that car runs like a raped ape son.

Post by **shane_lxi** » Mon Oct 08, 2007 7:48 pm

You are a bastard :P, lol. Nice car, nice to see someone with money doing their own work. Nice build!

Post by **mrzabala** » Mon Oct 08, 2007 9:40 pm

Awesome, an update. Was wondering what you do to your stock engine and such? hopefully I'll be buying one this week and I really don't know much about the 510s, especially the engine and the whole carb configuration..

Post by **mesojdm** » Sun Oct 14, 2007 4:32 pm

update first page:D:D:D

Post by **ca18datsun510** » Sun Oct 14, 2007 6:07 pm

subaru console?

and you neeeeeed to protect your brake master.

you are just asking for a mess and fire with that.

Post by **jnuanz382** » Sun Oct 14, 2007 6:34 pm

wat master cylinder for the brake system???

Post by **Fuel4Blood** » Mon Oct 15, 2007 3:26 am

Wow dude your car is amaz za zing, mucho props on the build. Have a question, did you build the interals at all? Pistons, rodes, etc.

Post by **jallen** » Wed Oct 17, 2007 3:33 pm

holy crap that's sick. We need video!!! DO IT!

watch out for speed bumps!

Post by **xyzalvarez** » Sat Oct 20, 2007 5:19 pm

tsss! dang! nice proyect!..well done!...this is a killer dime! next year bring it to the japanese old car show on mary queen!

hey btw, what kind of hub are you using on your dime...it fits just right...i been looking for a quick release hub, but i dont know if any nissan hub will fit... im looking to use my personal sw for a long time... :P

hey where did you get it? have a link or site?

PROJECT DATSUN: SR20det 510

Re: (ca18datsun510)

Re: (ca18datsun510)

Re: (mesojdm)

Re: (mesojdm)

Re: (Masterdebater)

Re: (ace0073)

Re: (ace0073)

Re: (Masterdebater)

Re: (SR 240Z)

Re: (Masterdebater)

Re: PROJECT DATSUN: SR20det 510 (mesojdm)

Re: (mesojdm)

Re: (Logan76)

Re: (jnuanz382)

Re: (Fuel4Blood)

Re: (jallen)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums