Official Altima Coupe Projector GB

[dangeris]

dangeris.......how long are your led stirps running at the bottom of your head lights? i like this idea and i think im going to mess around with it and see if i can stick them inside so its out of the elements.

don't remember off hand but I know that with these strips, you have to cut it, you'll need to cut the strip every third LED starting form the end (the end without the wire of course) If memory serves me right, I think I cut off 4 sections of LEDs, which would be 12. I did a write up on it and it's posted on the "how to's" section.

[bina12834]

that light output and spread just doesnt seem as good as i was hoping it to be.

this is what i was hoping it would look like...



with an output like this....

[spockrock]

that's because the bulbs are 10 000k HID bulbs, my light out put is closer to the bottom with the stock HID bulbs.

[bina12834]

that's because the bulbs are 10 000k HID bulbs, my light out put is closer to the bottom with the stock HID bulbs.

lets get some pics of your output and a wall shot to compare

[spockrock]

LOL I will try to find a dark enough place and time. I dont have my car tonight its having the y-pipe prototyped on it.

-correction- its like the center one, I have never tried anything like in the bottom picture.

[brandonbeeb]

bina those pics are the side cutoffs not the front of the car. the picture was also taken in the daytime and its only one side of the car its not the front cutoff, believe me in person they look amazing.in that bottom picture the cutoff could be sharper on the corner it looks like its flaring up
Modified by brandonbeeb at 5:32 PM 9/15/2008

[bina12834]

its supposed to be higher on the right side

[spockrock]

its supposed to be higher on the right side

He knows what he is talking about, its how the light on the right hand and a bit on the left side flare up above the cutoff line.

[brandonbeeb]

its supposed to be higher on the right side

ya its supposed to be higher but see the flare on the far side of it, it looks like the shield isnt flat inside, well both of them look to be flaring up.

[bina12834]

im not saying your work isnt good brandon. dont get me wrong.......i just havent seen many pictures of the light output, cutoff, spread, etc of your work.

[ESP]

Mcheddadi, sign me up!!! I just sent my deposit in for:

1) Dual projectors2) Flat black housing3) White LEDs (hopefully five)4) HID kit w/ 6000K bulbs, dual demon eyes (two on either side)

[spockrock]

yeah sorry guys, I will post up pics, hopefully sometime soon, I don't have my car tonight, the y-pipe prototype is being built on the car. I am spending the evening with the gf tommorrow. I might be able to get some pics up late late tommorrow or wednesday evening.

[mcheddadi]

Mcheddadi, sign me up!!! I just sent my deposit in for:

1) Dual projectors2) Flat black housing3) White LEDs (hopefully five)4) HID kit w/ 6000K bulbs, dual demon eyes (two on either side)

DONE!

[bina12834]

yeah sorry guys, I will post up pics, hopefully sometime soon, I don't have my car tonight, the y-pipe prototype is being built on the car. I am spending the evening with the gf tommorrow. I might be able to get some pics up late late tommorrow or wednesday evening.

try to get the pics somewhere where its totally dark so we can see the output/spread/cutoff......and enjoy the time with the gf!

[spockrock]

try to get the pics somewhere where its totally dark so we can see the output/spread/cutoff......and enjoy the time with the gf!

Ok I think I might know a couple of places where I can try, again, it all depends if I have enough time. No guarantees.

[brandonbeeb]

Hey guys, it looks like i can get the led strips to work in the light, it would take a bit of custom work but im sure i can get it done for you.also the led should outlast the car.

[mcheddadi]

Hey guys, it looks like i can get the led strips to work in the light, it would take a bit of custom work but im sure i can get it done for you.also the led should outlast the car.

interesting, need pics of that

[II Knucklez II]

till when is the GB cause i'll be waiting some in 3 weeks

[Infantry1327]

the group buy is first come first serve, and there are only 8 spots left. Better act fast. You can check the first page of this thread for updates.

[dangeris]

Hey guys, it looks like i can get the led strips to work in the light, it would take a bit of custom work but im sure i can get it done for you.also the led should outlast the car.

That's Music to my ears Brandon!!!!

Mcheddadi, Mark me down Man!!! Payment sent for the following:

1) Dual projectors w/ gatlin style housing2) Flat Black Housing w/1 chrome accent (everything flat black except chrome strip above headlights)3) White Oznium LED Strip under OEM shroud4) 5-6 white LEDs on park light housing5) 6k HID bulb upgrade6) Dual demon eyes (two on either side, blacked out one quarter)7) Smoked Amber turnsignal projector cover (as shown blue subaru WRX pic)

Brandon, let me know if all this makes sense to you.



Now i just have to tell my wife what she just bought me for our wedding anniversary present

[Absolute Zero]

Brandon, I sent you an email, sorry for the duplicate, but the first didn't have a subject. Look forward to hearing from you.

[skilled44]

will the led strip interfere with the projector light...also sent you an e-mail...hit me back, thanks man

[mcheddadi]

That's Music to my ears Brandon!!!!

Mcheddadi, Mark me down Man!!! Payment sent for the following:

1) Dual projectors w/ gatlin style housing2) Flat Black Housing w/1 chrome accent (everything flat black except chrome strip above headlights)3) White Oznium LED Strip under OEM shroud4) 5-6 white LEDs on park light housing5) 6k HID bulb upgrade6) Dual demon eyes (two on either side, blacked out one quarter)7) Smoked Amber turnsignal projector cover (as shown blue subaru WRX pic)

Brandon, let me know if all this makes sense to you.



Now i just have to tell my wife what she just bought me for our wedding anniversary present

I just added your name! the GB is almost complete!

[brandonbeeb]

Hey guys just to let you know when you send your headlights to me mark them as a gift and reduce there value a bit or i end up getting custom fees, about 50 bucks a light if you dont mark them right, which means i have to throw it on to the total cost. so for future reference mark as a gift.i should have pics of the dual setup shortly for you guys and girls

[LongBeachCoupe]

Good point brandon..EVERYTHING is a GIFT or SAMPLE with NO VALUE!

[brandonbeeb]

First off, Brandon, those headlights are amazing! They look really HAWT!!!!! Can't wait to see the duals!

Is there a "break" in the angel eyes where you could use heat resistant shrink tubing instead of electrical tape? Just throwing questions and ideas out there Brandon. Not criticizing your work by any means. We're glad that you've taken on the challenge and stepped up to the plate to do these for us!

BTW...did you get to measure to see if you can fit the flexible LED strip underneath the OEM shroud yet? I'm thinking you'll have to cut the shroud the width of the LED strip then mend the shroud back together. Let me know man....anxiously waiting to hear the answer...

The problem with heat shrink is that to get it to fully seal you cant cut it in half or else it will shrink to much and unwrap. it comes in like a straw and theres no way to slide it over an angel eye since its a full circle

[bina12834]

for some reason i cant find your email address brandon.....lol.....can you post it again? you should be getting an email with questions from me shortly after.

[spockrock]

Sorry guys got some bad news, the shop needs my car still so I get it back tomorrow.

[bina12834]

mcheddadi, can you do a quick photoshop for me? i just want to see what it would look like to have this same set up, but keep the amber turn signal?

also brandon, in the last pic, what is that black rough cut looking stuff on the right hand side of the headlight....is that the seal?

Modified by bina12834 at 2:44 PM 9/16/2008
Modified by bina12834 at 3:31 PM 9/16/2008

[bina12834]

domdada.....take some pics for us when you get them installed so we can see the hawtness!!!!