nissan autodim mirror connector

[V6er]

Yello! (mostly @VStar650CL )
decided that piggy bank has been full too long - and decided to treat ol' Nissan T32 ( )
anyway - bought mirror from infinity q50 2014-2024 - 96321-3WV1A(according to parts catalog this was middle option for T32s - there was just a mirror, then this with autodim and homelinks and third one(my guess - autodim, homelink and compass?),)
always nice to buy 1000+ usd thing ( https://parts.nissanusa.com/parts/nissa ... 963213wv1a )for 25er (ebay).

removed ceiling "panel" where glasses can be held and little lights are... I don't see connector for these fancy mirrors.

so - I need a connector.
this is how it should look like - https://prnt.sc/XS8Bng2S2pVh
this is how male part of connection looks on mirror - https://prnt.sc/VGElv1ZfsTZW

tried to look for it at infamous Toyota catalog - no joy.

any suggestions?

[VStar650CL]

I can't look at offsite pics here in the shop, but it should be another Sumitomo, TH10FB-NH. You can get a pigtail from Nissan but it's $59:
https://www.nissanpartsdeal.com/parts/n ... 9dn2c.html

However, it's pretty much the standard mirror connector for everything Nissan/Infiniti for the last two decades, so you shouldn't have any issues finding them in JY's. The advantage to that is, they'll probably already have wires in the right slots. As I mentioned in your post about cluster connectors, the THxx series is a complete PITA to unpin, so the right wires being in the right places is a substantial time saver.

[V6er]

I can't look at offsite pics here in the shop, but it should be another Sumitomo, TH10FB-NH. You can get a pigtail from Nissan but it's $59:
https://www.nissanpartsdeal.com/parts/n ... 9dn2c.html

hmm - not sure if this is right picture on their website - https://www.infinitiwholesaledirect.com ... 240089dn2c - but it looks different. on my mirror it is 10pins, 2x5.
anyway - is there a way for diy like me to know - which "conn kit" is which?!
I mean - it is great that you are helping, but I would like to be as christians who can catch fish themselves

However, it's pretty much the standard mirror connector for everything Nissan/Infiniti for the last two decades, so you shouldn't have any issues finding them in JY's. The advantage to that is, they'll probably already have wires in the right slots. As I mentioned in your post about cluster connectors, the THxx series is a complete PITA to unpin, so the right wires being in the right places is a substantial time saver.

good idea, thx!

[VStar650CL]

Yah, that's a wrong picture. The TH10's are 5x2. I took that part number and the Sumitomo number from Nissan's connector identifier website, and that matches the callout in the WD. So I'd be 99.99% sure the number is right and the pic is wrong.

[VStar650CL]

anyway - is there a way for diy like me to know - which "conn kit" is which?!
I mean - it is great that you are helping, but I would like to be as christians who can catch fish themselves

If you pay Nissan for an ASIST subscription, I can show you how to use the connector finder. That's the only way to xref the Nissan kit number to a Sumitomo number. They also never put Sumitomo numbers in many of the PDF WD's, so you need to access the EWD in ASIST to get those. Basically, without a subscription you're SOL.

[V6er]

I hate when advice starts with "you buy this..."
anyway - thanks! )

[VStar650CL]

Yep. Sucks, but your only $0 option is basically, "Ask V."

[V6er]

Yep. Sucks, but your only $0 option is basically, "Ask V."

and I love it