NGK Spark Plugs

[knave]

I don't know if this has been posted before, (I searched and read the FAQ), but I need to know *which* NGK plugs to get for a totally stock 1990 5spd coupe? For example, on my MR2, I used the BKR7E. I just want to know what the owner's manual or shop manual (I have neither) recommends. Also, are NGK wires any different than getting OEM wires at a dealer? Are they better or worse? Most cars I've seen run best on factory plug wires, and aftermaket ones tend to be worse...

Thanks,Mike

[nnkfws333]

I dont know the exact part number but just get the NGK V plugs. I know that pep boys carry them. All I know are that the ultra spark wires suck! um.....I have Accel wires I got from enjuku which so far are pretty good.

[Aries]

NGK V Power TR6 or TR 55.

They are cold plugs in platinum for cars without boost or Nitrous still desiring performance.

[knave]

NGK V Power TR6 or TR 55.

Thanks!

[knave]

For people who come across this thread by searching, this is the part number I was looking for:

NGK ZFR5E-11

That is the stock replacement copper plug for the 89-90 12 valve 240SX.For those of you with the 91-98 16 valve engine, the part is:

NGK BKR6E-11

These are normal copper plugs (not iridium or platinum, which I consider to be a waste of money).

Mike