NEW catback systems! BRM Exhaust for 240sx

Post by **ka240s13** » Thu Dec 24, 2009 10:52 am

h

Space Monkey wrote:Exhaust Received! HUGE C.O.D. when shipped to Canada though... I will let you know how it is when i install it!

Thanks Greg!

how much did the c.o.d cost you?

Post by **Space Monkey** » Thu Dec 24, 2009 2:11 pm

UPS C.O.D. was $143.xx just for info for Canadians

Post by **asoomal** » Thu Dec 24, 2009 5:17 pm

Ya, we kinda get raped on that.

Post by **Amtk240** » Sun Jan 10, 2010 8:06 am

I just had to post photos of only the BEST exhaust on the planet!

My setup includes a 22" resonator, 2.5" piping, a high flow cat, stainless steel, and Nismo hangers.

Post by **Space Monkey** » Sun Jan 10, 2010 1:47 pm

Could we get a sound clip man?

Post by **johnny butt** » Sun Jan 10, 2010 4:34 pm

Space Monkey wrote:Could we get a sound clip man?

http://www.youtube.com/watch?v=Q0y3v9qQkAU

The motor is an RB25 so your Stock KA might sound different...

Post by **danmansil80** » Thu Jan 14, 2010 12:28 pm

Hi, how much for a catback system with a 22inch res and twin tip shipped to 91744? also do you sell the high flow cats as well???Thanks

Post by **danmansil80** » Mon Jan 18, 2010 4:57 pm

bump??

Post by **asoomal** » Mon Jan 18, 2010 5:44 pm

It's on the first page.

Quote »Tips - All systems are available with either a 4" single chrome tip or dual 2.5" beveled chrome tips (add $30).

Resonator - A resonator can be added to any system for $70. A 14", 18" or 22" resonator can be selected. Longer resonator = deeper tone.

Fitment- Our system bolts up to the factory cat flanges and uses the factory hangars.

Catalytic Converter - A high-flow cat (any size) can be added to any system for $135, and can be purchased separately for $155. This is a direct bolt-in catalytic converter, in the stock length, complete with flanges and hardware.

Pricing - S13/S14 pricing (with resonator) is as follows:

2.25"aluminized $400, stainless $500

2.5" aluminized $400, stainless $500

3.0" aluminized $460, stainless $560

ADD $30 FOR DUAL TIPS.

Shipping (48 states) is $45. Shipping to Canada is $75.[/quote]

Post by **AZhitman** » Mon Jan 18, 2010 6:08 pm

Sean, that looks HOT!!!

Can I use those pics for the soon-to-be-redesigned site?

Post by **maj Andres** » Mon Jan 18, 2010 7:13 pm

I remember when the inside of my tips used to be shiny.... now they are black! Been running this exhaust for 2+ years, and it is still holding up great! Still wanna upgrade to 3 in piping though....

Post by **mudvayne9790** » Mon Jan 18, 2010 7:32 pm

im gonna have to get one of these maybe next month

Post by **a_ahmed** » Tue Jan 19, 2010 2:31 am

Do you guys build exhausts for other cars eg; 97 eagle talon tsi (same as mitsubishi eclipse gsx).

Post by **float_6969** » Thu Jan 21, 2010 6:06 pm

Pics and short vid of my BRM exhaust I just installed.

Mods(that would effect exhaust tone):CA18DETSSAC equal length maniStock CA T25eGhey 3" O2 pipeeGhey 3" downpipe3" catco cat3" BRM cat back exhaust w/22" resonator and dual tips (obviously)Cheap eGhey poly exhaust hangers (SUPER stiff, but so far, no interior rattles)

Post by **Space Monkey** » Thu Jan 21, 2010 6:22 pm

Thats AWESOME!

Post by **jrb92se** » Sat Jan 23, 2010 7:15 am

i bought an dual tip exhaust from p2m (circuit sports) it was supposed to bolt on but i ended up having to pay a shop to modify it so it actually fit. all the pics and vids ive seen of this exhaust it looks much better (fitment qaulity at least).

Post by **bearback** » Sat Jan 23, 2010 7:28 am

whats the lowest price shipped to 33852 for an s13 dual tip?

Post by **danmansil80** » Sat Jan 23, 2010 11:35 am

hey greg. can i get a 2 1/2 catback with 22inch res, muffler and dual tip shipped to 91744. thanks

Post by **JustinStrife** » Sat Jan 23, 2010 1:11 pm

I'd like to hear how these exhausts would sound hooked up to an LSX Chevy motor swap. Loved the BRM with my SR and KA motors. Bet it's pure sex with a V8.

Post by **asoomal** » Sat Jan 23, 2010 2:56 pm

Probably sound like a V8 with magnaflows :P

Post by **AZhitman** » Sat Jan 23, 2010 8:44 pm

danmansil80 wrote:hey greg. can i get a 2 1/2 catback with 22inch res, muffler and dual tip shipped to 91744. thanks

Yep - $475 shipped.

Email me at [email protected].

Post by **a_ahmed** » Thu Feb 18, 2010 6:09 pm

Would you guys be able to make exhausts with two resonators as opposed to one long 18" one? And would you guys be able to make 2.0" piping? Just curious

Post by **AZhitman** » Sun Mar 21, 2010 5:22 pm

No and no.

Post by **menace88** » Thu Mar 25, 2010 5:14 pm

I've been wanting one for so long, damn debts.

I lost the email quote, how much for a 2.5" stainless steel with 18" resonator and with the dual tips? Thanks again, hopefully I can get this soon enough.

Post by **AZhitman** » Thu Mar 25, 2010 5:20 pm

$575 shipped.

Post by **Shusaka** » Thu Mar 25, 2010 6:03 pm

Quick question, i noticed that in the first post, you state, these are hand built, not mass produced, i also noticed that "BRM believes in maintaining a stock fitment and appearance". i was wondering if it is even a possibility to pay a premium and have a, "one-off" BRM exhaust for my s13, just a small adjustment in appearance, to remove the last 2 bends highlighted in pic and replace them with a simple 45 degree angled up about 20 degrees or so to mimic the look of the exhaust on the s14 in the other pic below the brm exhaust, if not i will still purchase a brm unit when the funding becomes available, btw how much for a single tip aluminized with 18" resonator shipped to 77802? i would love to support NICO as much as possible and i hope you dont take my request as an insult to your already amazing exhaust, i am just wondering if a small tweak was available

Post by **AZhitman** » Thu Apr 08, 2010 5:50 pm

Hey Randall!

Good question. Unfortunately, we can't - They're built on a jig to ensure accuracy of fitment, and any deviation from that would have to be "eyeballed" (or fitted to the car with the car on a lift).

Those last 2 bends also kick up a little to "tuck" the exhaust up under the car - hard to see in that top view pic, but there's an "up-bend" in there as well.

Post by **a_ahmed** » Fri Apr 09, 2010 1:43 am

It's been a few years, should consider making extra options for the cars

Post by **ni7enichi** » Wed Apr 14, 2010 10:13 pm

are these still being made? looking to get a 2.5 alum catback with 22" resonator and dual tips + 2.5" hi-flow cat shipped to 23462

Post by **SX APPEAL** » Fri Apr 16, 2010 4:18 pm

Just for fun... S14, 3" aluminized, dual tip, w/ cat, no resonator. Shipped to 65336

NEW catback systems! BRM Exhaust for 240sx

Re: (Space Monkey)

Re: (ka240s13)

Re: (asoomal)

Re: (Amtk240)

Re: (Space Monkey)

Re: NEW! Exhaust for the S13/S14!!! (AZhitman)

Re: NEW! Exhaust for the S13/S14!!! (danmansil80)

Re: (AZhitman)

Re: (AZhitman)

Re: (mudvayne9790)

FN-QR

Re: FN-QR (float_6969)

Re: FN-QR (Space Monkey)

Re: FN-QR (Space Monkey)

Re: NEW! Exhaust for the S13/S14!!! (AZhitman)

Re: NEW! Exhaust for the S13/S14!!! (danmansil80)

Re: (AZhitman)

Re:

Re: NEW! Exhaust for the S13/S14!!! (AZhitman)

Re: (AZhitman)

Re: NEW! Exhaust for the S13 / S14 240sx!!!

Re: NEW! Exhaust for the S13 / S14 240sx!!!

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums