Need some parts for my Hardbody

[meeeke]

Hi everybody, I was wondering if anyone has any of the following parts:

WANTS: dash (RED/MAROON)driver door armrest (RED/MAROON)rear pillar(?) panels - the ones that cover the metal where the seat belts bolt up. (RED/MAROON)tailgate(white)

This is my second hardbody, i got it off my uncle who kinda abused the little truck. I would have picked up these parts already but since i just moved to Los Angeles i really dont know where any of the junk yards are out here. So if anyone has the parts listed above or knows where to get them pretty cheap(I'm a broke college student) please feel free to contact me.

Thanks everybody!-mike
Modified by meeeke at 11:20 PM 2/4/2009

[InsertNameHere]

I just recently got myself a hardbody too. I went to a couple pick your part style junkyards in LA (Wilmington) and I only saw 1 hardbody. There wasn't really much left of it.

My local Nissan parts department told me to give these guys a call. http://www.autopartrecycling.com/ Looks like they have a few hardbodies and pathfinders. They didn't have what I needed, but they might have what you want.

[Desert Rat]

I have a friend with a '93 Pathfinder he's parting out with a maroon interior.

I'll talk to him this weekend about it.

[Desert Rat]

Update...the dash he has is cracked pretty bad. Could probably do the kick panel and the door pieces you're looking for. email me at [email protected] and I can get you in touch with him if you're interested

[steveOd21]

this place is amazing they rebuild and sell used toyotas (eeww) but they have alot of nissans too you wont need to go any where eles and the guy is very resonable if your willing to hang out a while and not be pushy

http://www.calminitruck.com/ its says montcliar but its really like pomona very worth the drive i live in pasadena and its like 20 mins

[meeeke]

Hey guys thanks for the info it is appreciated.

-mike

[mrecoolgar]

I have the spare lowering rod and the jack.Let us know if you need just the jack, or the cap, or the holder, or the jack tools, jack pouch ...I'm in PA but could ship the jack in a flat rate priority for $12.The rod will fit in a triangular 'poster' priority box for $9.Make a fair offer and they're yours.

[Natedawg500]

not to high jack your thread but can someone hook me up with a a/c line from the compressor to the firewall area. goes over the exhaust manifold. for a 4cyl.

email me at [email protected]

[InsertNameHere]

not to high jack your thread but can someone hook me up with a a/c line from the compressor to the firewall area. goes over the exhaust manifold. for a 4cyl.

email me at [email protected]

Not to hijack your post, but I need that same line too. As well as the bolts that bolt it to the compressor.

[meeeke]

actually, i dont mind the bump.