Need Help From a B13 Se-R Owner!!!!

[OmegaX1]

Ok so im in the middle of a swap, and i need sum1 with a B13 (91-94) Se-r Sentra, I need 2 know what the color of the two wires to the harness that plugs into the coil on the bottom side of the coil, theres 2 wires and i just need there colors, any help is greatly appreciated

[RED_DET]

green wire w/wipe stripe and black wire w/red stripe.

[OmegaX1]

Wat about a green wire with a yellow stripe and black wire with a red stripe???, is there anyway 2 know by meausring how much power is running through it???

[RED_DET]

I believe it is a greeen wire w/yellow stripe. It was kinda dark when I was looking at it.

[OmegaX1]

Ok so I need some more help,

I need to know what are the color of the wires for the oxygen sensor.

What are the color of the wires for a chip looking thing that sits behind the coil with three wires, the part number on it is: PRW-1A 1106

Also can anyone tell me what an ignitor chip is or if it has one and if so where is it located?

Thank you

[OmegaX1]

Bump

[Liquid_Neon]

ignitor chip is a lil box that runs inline to the coils

looks like this:http://cgi.ebay.com/ebaymotors...87091

[OmegaX1]

Can someone do me a big favor and take a pic of where it is on a B13 SER

[Liquid_Neon]

If i recall, a B13 had a distributer actully. Only sr20det have DIS?

[RED_DET]

Ok so I need some more help,

I need to know what are the color of the wires for the oxygen sensor.

What are the color of the wires for a chip looking thing that sits behind the coil with three wires, the part number on it is: PRW-1A 1106

Also can anyone tell me what an ignitor chip is or if it has one and if so where is it located?

Thank you

Red/Blk/White are the colors for the o2. That chip your are referring to is the ignitor chip.

[OmegaX1]

Wat color are the wires dat go into the ignitor chip?