need help! cant get glove box back on

[WhoDey456]

changed my cabin filter and can not get my f*ing glove box back on!!!!! help!!!!!

[szh]

Some pictures to explain the difficulties perhaps?

Have you looked at the Service Manual (link to the PDF's is in my sig) to see if it references something that might help?

Z

[antzrus]

Try this thread: zer...ilter

[szh]

Try this thread: zer...ilter

A good reminder link - I had forgotten about it. Thanks!

Z

[SteveTheTech]

changed my cabin filter and can not get my glove box back on!

First off you need to take the door off and look at it, notice the plastic clips on the bottom of the box lid and the backing plate. Note that the bottom cover (for the blower motor) needs to be the last thing to go on.

To get the glove box cover back on you need to attach the draw string (on the right side of the box assembly), while pulling some tension you will need to gently catch the tabs and secure it by lightly pushing downward. It will take you several times, the most important thing to remember is to stay calm and don't force it. That lid is several hundred dollars and warranty does not cover DIY accidents.