n/a and tt transmissions
n/a and tt transmissions
wanting to swap a tt motor with and auto trans into my n/a car that has a manual trans. but i want to keep the manual trans. will i have to get a tt clutch or flywheel or both?
Re: n/a and tt transmissions (Carson)
get a reverse manual valvebody for the auto , then it shifts like a manual and you can't outrun one with a manual..BTY, you'll also have to change the shifter to a ratchet type...
-
SilverTwin(OH)
- Posts: 356
- Joined: Sat Jun 04, 2005 6:51 pm
- Car: '91 300ZX Twin Turbo
Re: n/a and tt transmissions (Carson)
You will need to remove the automatic bushing from the TT motor and install a pilot bushing for the manual trans.
You can use the NA manual transmission. You can stick with the NA flywheel and go to a clutch that will support the tq and hp of a TT, Southbend offers several that will work well.
You can also go to TT clutch/flywheel but you will need to grind a small amount of high spots on the inside of the bell housing to provide clearance for the larger diameter TT flywheel. You will also need to shim the starter out.
Hope this helps,Tim
You can use the NA manual transmission. You can stick with the NA flywheel and go to a clutch that will support the tq and hp of a TT, Southbend offers several that will work well.
You can also go to TT clutch/flywheel but you will need to grind a small amount of high spots on the inside of the bell housing to provide clearance for the larger diameter TT flywheel. You will also need to shim the starter out.
Hope this helps,Tim
Re: n/a and tt transmissions (SilverTwin(OH))
yea thanks. that helps alot