my coupe

All things Altima Coupe.
jaxCoupe08
Posts: 85
Joined: Sat Jan 19, 2008 10:07 am
Location: jacksonville, fl

Post

Everyone who wondered.



My ride.ARd 5zigen gt spoke 3pc wheels18x9 +48 front18x10 +35 rearstretched nankangs nsII 235/40/18project mu lugnutsgroundcontrol/eibach coil springs

Everything else I will install when I have time and money.So its completely stock!!


User avatar
mcheddadi
Posts: 6666
Joined: Thu May 17, 2007 2:24 pm
Car: R8

Post

love the wheels

RB4Life
Posts: 80
Joined: Wed Apr 08, 2009 6:28 am
Car: Nissan Altima Coupe 2.5 CVT

Post

Yes rims are very nice. What are your plans with it?

jaxCoupe08
Posts: 85
Joined: Sat Jan 19, 2008 10:07 am
Location: jacksonville, fl

Post

Thanks for the kind comments.

I made a custom front lip off a 350z but never finished it. I'm looking for some nice simple side skirts and run a full diffuser in the rear. Needs to be repainted because I got scratches here and there.

The wheels, I want to buy new barrels with same size but +25 front +7rear and 225/40 stretch tires.

I used eibach / groundcontrol coil springs and the front I only used the springs(no sleeves). Rear can go another inch. Not happy with stance but rides great. Im save up for Ksports because I like tucking tire with wide wheels.

I just posted for now as a start. I'm on 3 car projects at once. Its time and money along with bad economy doesn't help.

User avatar
SHIFT_COUPE
Posts: 3887
Joined: Fri Aug 03, 2007 3:36 am
Car: 2014 Infiniti Q50 AWD
Location: Bethel, CT
Contact:

Post

Sick wheel setup

Mr.Coupe
Posts: 1300
Joined: Thu Jul 05, 2007 4:51 pm
Car: 08 Altima Coupe 3.5 BOOSTED
Location: SoCal

Post

DAMN that looks HOT. Do you have any pics from the rear of the car? I would like to see a pic from above the rear fender to the wheel. Do the rear wheels poke out of the wheel wale? Nice job. So what's next for the car?

Ricky C.

jaxCoupe08
Posts: 85
Joined: Sat Jan 19, 2008 10:07 am
Location: jacksonville, fl

Post

Wheels sit right at the body and Its slightly cambered. Thats why i'm trying get wider barrels from memory fab off bbs. Its dark outside so I will get pictures for you tomorrow.

I'm going for this look

User avatar
Bmore-coupe
Posts: 6440
Joined: Fri Sep 26, 2008 4:00 pm
Car: 08 Altima Coupe 3.5
Location: Baltimore, MD

Post

Ive always wondered how those cars with the "VIP" style can turn without bending the s*** out their fenders.

Looks real good so far Jax

jaxCoupe08
Posts: 85
Joined: Sat Jan 19, 2008 10:07 am
Location: jacksonville, fl

Post

you roll the fenders as much as you can then negative camber. Wheels look tucked but its just the negative camber, when you turn the wheel it gets close though and rubs which results to paint chipping off with tire chunks. Its usually only done for shows and photoshoots.

User avatar
alticoupe3.5
Posts: 232
Joined: Sat Sep 13, 2008 3:40 am
Car: NISSAN ALTIMA COUPE

Post

that sh*t looks sick as hellll...i like the way they looked bent in a lil bit...u should deff do this to your A/C...deff would look sickkkk...cant wait to see what u do to it

User avatar
Rob.Vegan
Posts: 2665
Joined: Thu Jul 10, 2008 7:05 pm
Car: 08 2.5S Altima Coupe 76 Datsun 280z (not running)
Location: Orange County, CA

Post

2.5 ???

What other cars are you working on ???

I love the wheels as well

jaxCoupe08
Posts: 85
Joined: Sat Jan 19, 2008 10:07 am
Location: jacksonville, fl

Post

Thanks everyone, I found new barrels 18x8.5 +15 18x10 +7 $1200 price tag. Little to much for me right now.

My other project is a all show 02 accord sedan 4dr. Other is a 94 civic hatch. I also did the stunt bike and had to give it up after turbo'n my 05 zx6cir.

Yeah its only 2.5. If anyone knows someone selling a 80s 2dr buick regal(looks somewhat like the gtand national) in florida or georgia please tell me. Must have no rust, no major accidents/dents, and runs good einoth.

User avatar
dangeris
Posts: 5139
Joined: Wed Sep 19, 2007 6:18 pm
Car: 08 Code Red 3.5
08 BMW 328xi Coupe
90 300ZX 2+0 NA
Location: Lansdale PA
Contact:

Post

jaxCoupe08 wrote:you roll the fenders as much as you can then negative camber. Wheels look tucked but its just the negative camber, when you turn the wheel it gets close though and rubs which results to paint chipping off with tire chunks. Its usually only done for shows and photoshoots.
Nice wheel setup but why on earth would you want to put a aggressive negative camber? Just to make it look tucked? If so that's just insane? You can achieve this look by getting a reverse wheel setup with a higher offset and airbag suspension. Unless you have a lot of money to throw away on tires let alone for body damage of running that setup, I say look at other options.

User avatar
Bmore-coupe
Posts: 6440
Joined: Fri Sep 26, 2008 4:00 pm
Car: 08 Altima Coupe 3.5
Location: Baltimore, MD

Post

I didnt realize it until about a month ago, But there is a whole "VIP" section of NICO. The camber on some of the cars in there is ridiculous.

How did I miss that? And I agree with Dangeris, I think that it is a unique look, but personally I think that it is a waste of some expensive tires.

jaxCoupe08
Posts: 85
Joined: Sat Jan 19, 2008 10:07 am
Location: jacksonville, fl

Post

I'm not going for the tuck look, i'am going to tuck the up to the tread portion. Tires aren't no big deal, tires like nankang don't cost that much. You got to pay to play. I got wide wheels on stretch tires on all my cars and low to the earth.

User avatar
bravey_z12
Posts: 373
Joined: Sun Jan 27, 2008 1:40 pm
Car: 2.5 6spds A/C [azure blue]

Post

Bmore-coupe wrote:I didnt realize it until about a month ago, But there is a whole "VIP" section of NICO. How did I miss that? .
where?

yo jax,nice ride dude2.5ers FTW

jaxCoupe08
Posts: 85
Joined: Sat Jan 19, 2008 10:07 am
Location: jacksonville, fl

Post

By request:




Mr.Coupe
Posts: 1300
Joined: Thu Jul 05, 2007 4:51 pm
Car: 08 Altima Coupe 3.5 BOOSTED
Location: SoCal

Post

Thanks for the pics I requested dude. The wheels look F'EN great on the car. Can you please take one from the side rear looking toward the front of the car? So I can see the poke sideways. Thanks.

Ricky C.

User avatar
Bmore-coupe
Posts: 6440
Joined: Fri Sep 26, 2008 4:00 pm
Car: 08 Altima Coupe 3.5
Location: Baltimore, MD

Post

bravey_z12 wrote:where?
zeroforum?id=260

jaxCoupe08
Posts: 85
Joined: Sat Jan 19, 2008 10:07 am
Location: jacksonville, fl

Post




Mr.Coupe
Posts: 1300
Joined: Thu Jul 05, 2007 4:51 pm
Car: 08 Altima Coupe 3.5 BOOSTED
Location: SoCal

Post

Thanks for the pics again dude. They look GREAT. So what's next for the car?

Ricky C.

jaxCoupe08
Posts: 85
Joined: Sat Jan 19, 2008 10:07 am
Location: jacksonville, fl

Post

1. install yellow lens oem foglights2. Finish front lip3. Hid kit I got laying around @ 5k4. put the lil' kicker system in.5. chrome some plastic pieces in the engine bay6. I really want to do full Bride recline front seats, reupholster rear seats, door panels, sun visors all in Bride.7. New suspension and wheel barrels, then go hard!

Just to let ya'll know this is my girl's car, not mine. She goes on this forum and nissanthusiast under my name.


Return to “Altima Coupe (2008-2013)”