My CA18det $1,400.00 front clip pictures! Beware dialup!

[Nowhere]

Here's the truck the engine is going into.1996 Suzuki X-90. She's got a 1.6 95hp motor now.This has a boxed frame, it's not a unibody 4x4 will be removed as I can not find a transfer case..

PICTURES!!!

Here she is in all of her glory! Easy tow...Yep, too bad no projection lamps..

zerofile/19382/1.jpg

zerofile/19383/2.jpg

No fenders or bumpers... Rims look nice.

zerofile/19384/3.jpg

This is the important half of the car

zerofile/19385/4.jpg

About 73k miles, battery is good. The steering wheel was of no use so he took it..

zerofile/19386/5.jpg

DRIVERS side ahaha

zerofile/19387/6.jpg

The hood is in very good shape, for sale soon..

zerofile/19388/7.jpg

Engine bay

zerofile/19389/8.jpg

Engine bay, most of the aluminium has the white crap on it. It flakes/goes away very easily, it's not deep corosion..

zerofile/19390/9.jpg

I'm assuming the timing belt was replaced at 105k?? By the looks of the 02 sensor, it's very new too..

zerofile/19391/10.jpg

Stock SMIC. For sale soon too..

zerofile/19392/11.jpg

Any interest in these rims??

zerofile/19393/12.jpg

I've got to fit the clip WHERE!!! Ha

zerofile/19394/13.jpg

Under shot. Looks like all the seals are good, the oil spots look like travel/shipping oil..

zerofile/19395/14.jpg

PASS mount shot

zerofile/19396/15.jpg

Drivers mount shot. Suspension stuff for sale soon..

zerofile/19397/16.jpg

How the FAWLK do I get this off the dolley, ALL BY MY SELF!! This worked well, the building is still standing

zerofile/19398/17.jpg

AWWWWWWWWWWW CRAP!!!!!

zerofile/19399/18.jpg

No problem, I was able to turn the car using the wheels, the steering is locked... She fits PERFECTLY!!

zerofile/19400/19.jpg

[float_6969]

Congrats! But was that a bungee cord that you used to pull the clip off with? If so, props to you!!!

[c-rad]

Nice! BTW, I assume you'll be using custom mounts for your setup... if so, PLEASE! let me get the stock mounts from you.

[Nowhere]

Congrats! But was that a bungee cord that you used to pull the clip off with? If so, props to you!!!

Nahh, that's a ski rope tied to the roof rafter with a comealong pulling the front clip. I was able to pretension the car, then rotate the tires by hand (notice, too much on one side......). The back of the clip can be picked up, it's about 100 or so lbs.

[Nowhere]

Nice! BTW, I assume you'll be using custom mounts for your setup... if so, PLEASE! let me get the stock mounts from you.

Based on what I know and what I have available to me, I will not be using the stock mounts. When/if they are going to be available..........................

[jjwilks240]

i also have the markings on the timing cover the same as yours, they might be something the nissan dealership puts on the cars

[Nowhere]

i also have the markings on the timing cover the same as yours, they might be something the nissan dealership puts on the cars

Do you have the badge as well as a KM marking??

I wonder if the other marks besides the KM are the tech/dealership...

OEM timing belt change intervals are at 100k KM correcT?

[NeedCAforS13]

i also have the markings on the timing cover the same as yours, they might be something the nissan dealership puts on the cars

if you buy a nissan OEM timing belt they give you that sticker... only mine was in english and had miles instead of KM's (I got mine from a US dealership )

Sean

[NeedCAforS13]

and not to be mean or anything, because its a nice clean looking clip but those wheels and that hood are stock 89-90 240sx parts. I highly doubt anyone pay you very much for them. Silvia hood would have been worth something, but not a stock USDM hood...

other than that, nice clip! That'll be one sweet ride when you're done

Sean

[NeedCAforS13]

I don't know if you've ever seen this, but here's a similar idea I saw it on a yahoo japan auction awhile back!







Sean

[Nowhere]

DAM! I thought I would have been the 1st to install a ca into a suzuki vehicle. lol

The JDM and USDM hoods CAN be the same (vs the projector style hood.... Found on the 200/240sx???)?

[c-rad]

DAM! I thought I would have been the 1st to install a ca into a suzuki vehicle. lol

The JDM and USDM hoods CAN be the same (vs the projector style hood.... Found on the 200/240sx???)?

All the S13's with pop-ups have the same hood, fenders, and bumpers.

[Neejay]

I don't know if you've ever seen this, but here's a similar idea I saw it on a yahoo japan auction awhile back!

LOL @ wrx hood scoop

And, damn, $1,400....was that total? Nice.