MOAR CA stuff for sale. A/C Bracket/Coil Packs etc.

[HighwayStar22]

Hey guys. I have a few items that I do not need right now for my motor, and as opposed to hoarding them, which I probably should do since this motor is hella old, I'm gonna sell them. I'm posting pics tonight.

Motor Mount brackets w/ bolts - $25 shipped

CA A/C Compressor Bracket w/ Idler pulley. These are probably as rare as the SR ones. I really don't know - $35 shipped

4 Coilpacks - $SOLD

CA Block needs to be bored 30 over. Previous owner detonated and cracked #2 ring lands and popped the h/g. #1 has slight flash rust, #2 and #3 had pretty decent standing water and in turn rust. Block has already been hot tanked and painted black. This is a bare block. - $20 plus shipping (probably be around $40-$50)

CAS - $50 shipped

Paypal is importguy22 [at] gmail {dot} com

If you have questions, email me at limitbreak22 [at] tmail {dot} com or send me a message on AIM at Limitbreak22

Those contact methods go to my phone, I always have it on me.
Modified by HighwayStar22 at 12:43 PM 8/15/2008

[r34 gtr]

That is one sweet deal on that block. Too bad I have nowhere to put it.

[DALAZ_68]

email me

Hey guys. I have a few items that I do not need right now for my motor, and as opposed to hoarding them, which I probably should do since this motor is hella old, I'm gonna sell them. I'm posting pics tonight.

Motor Mount brackets w/ bolts - $25 shipped

CA A/C Compressor Bracket w/ Idler pulley. These are probably as rare as the SR ones. I really don't know - $35 shipped

4 Coilpacks - $55 shipped

CA Block needs to be bored 30 over. Previous owner detonated and cracked #2 ring lands and popped the h/g. #1 has slight flash rust, #2 and #3 had pretty decent standing water and in turn rust. Block has already been hot tanked and painted black. This is a bare block. - $20 plus shipping (probably be around $40-$50)

CAS - $50 shipped

Paypal is importguy22 [at] gmail {dot} com

If you have questions, email me at limitbreak22 [at] tmail {dot} com or send me a message on AIM at Limitbreak22

Those contact methods go to my phone, I always have it on me.

with pics of the AC stuff...any chanc eu have the lines?

[HighwayStar22]

Sorry boss, no lines just the bracket. I'll send pics tonight! send me your email and I'll send them there too.

[HighwayStar22]

[roplusbee]

What is the deal with the coilpacks? Got the rubber pieces and all? If so, chalk me down for the purchase

[HighwayStar22]

Yes I do. Paypal and they go out tomorrow.

[roplusbee]

Paypal sent.............

[HighwayStar22]

Paypal sent.............

Label printed. As soon as I get home tonight they go in the mail. Thank you sir.

[roplusbee]

Cool

[ca18detgabby]

you coming to orlando any time soon? I would love to grab the block from ya

PS for those interested in lines. you can run SOHC lines and SOHC compressor if need be as well

[HighwayStar22]

you coming to orlando any time soon? I would love to grab the block from ya

PS for those interested in lines. you can run SOHC lines and SOHC compressor if need be as well

Aww I don't think I am anytime soon. I'm heading to SC this weekend. I don't know what shipping would be for Orlando. It should be cheaper.

[rico05]

So...how much for the block shipped to 75287 (Dallas, TX)?

rjnovak05 AT yahoo DOT com

[HighwayStar22]

So...how much for the block shipped to 75287 (Dallas, TX)?

rjnovak05 AT yahoo DOT com

I don't know how much the block wieghs to be honest. Feels about the same as a J30 i've shipped and that was 55. Judging off 52lbs for the bare block I'm coming up with 47.50 with fed ex ground.

[rico05]

Email me. It's sold.

[roplusbee]

you coming to orlando any time soon? I would love to grab the block from ya

PS for those interested in lines. you can run SOHC lines and SOHC compressor if need be as well

Woah, I missed tat one. Any mods needed to make that work? My compressor bearing is done and I only trust the dealer in my location to do any work at all. I would prolly pay 3-4 times the normal price at the dealer out here. And you seem to have all ther good tricks over there, wassup with that?

[ca18detgabby]

Woah, I missed tat one. Any mods needed to make that work? My compressor bearing is done and I only trust the dealer in my location to do any work at all. I would prolly pay 3-4 times the normal price at the dealer out here. And you seem to have all ther good tricks over there, wassup with that?

there have been a few threads about it. the only thing I think that is required is running a 3 tooth alt belt instead of the 4 tooth.

look in the archives....... I dont remember. obviously finding somewhere to charge it with the R12 instead of the 134 is a trick...