Hey Dan,

Can you get RB20 parts? I need a water pump, 21010-21U25.

Also, I need a part on the KA24DE tranny (1995 240SX SE). It is the part on the end of the striker arm that the shifter mates into. Can you get that?

1989 hatch

amolao wrote:1989 hatch

This pic has the part number in it.

Wulfgang wrote:Hey Dan,

Can you get RB20 parts? I need a water pump, 21010-21U25.

Doesnt look like a good number for me. I cant find that model in my catalogs either. Sorry

Wulfgang wrote:Also, I need a part on the KA24DE tranny (1995 240SX SE). It is the part on the end of the striker arm that the shifter mates into. Can you get that?

Its one of these two parts I think.

dantech wrote:The wires can be found here:http://www.trademotion.com/par...gid=1

The lighter asm is a number 25331-89902. You can do a factory number search for that one. Its both of the pieces you need. Heres a pic of that one. Thanks and let me know if I can help anymore.

Thanks, Dan. I'm having trouble pulling the lighter assembly up on the website with that part #. It's probably my fault. I've had the flu and apparently having a high fever for a few days can do stuff to your brain. Go figure.

hey dan, where are my hatch struts? I am in pinetop, az 85935. If that helps any. I ordered them i think 2 weeks ago.

how much for the thing goes in between the shock mount and the body? it's like a piece of thick papercould it be a gasket or something? front and rear.

thanks

Dan, regarding the KA tranny striker part. It's actually the 32844M that I was talking about, and I would also need the retaining pin 32917+B.

I'm not sure about the RB20 pump P/N, but Courtesy has the RB25/RB26 pump on their site, P/N 21010-RB2526. Does that number look valid?

BadMojo wrote:
Thanks, Dan. I'm having trouble pulling the lighter assembly up on the website with that part #. It's probably my fault. I've had the flu and apparently having a high fever for a few days can do stuff to your brain. Go figure.

I double checked it and it came right up for me. Let me know if you need any help.

w1ngzer0 wrote:hey dan, where are my hatch struts? I am in pinetop, az 85935.

They are discontinued from Nissan. Im working with a dealer in Idaho who shows to have them. I'll keep you updated as I am. Sorry bout the wait.

Wulfgang wrote:Dan, regarding the KA tranny striker part. It's actually the 32844M that I was talking about, and I would also need the retaining pin 32917+B.

Both are available by factory number search here:http://www.trademotion.com/par...gid=0

pin - 32917-E9620striker arm - 32844-V5002

Wulfgang wrote:I'm not sure about the RB20 pump P/N, but Courtesy has the RB25/RB26 pump on their site, P/N 21010-RB2526. Does that number look valid?

Still dont have a listing. Im pretty sure its not available for me to order unless Courtesy is listing their own number for something they get from an aftermarket source. Is the RB20 an engine or model type?

RB20 is engine type, specifically an RB20DET, from a 91-93 Skyline GTS-t (JDM, of course).

I am not sure how Courtesy gets it, but they have other JDM parts on their site.

While I'm at it, I may as well get a new shifter bellows, 32862, and plate gasket, 32169.

I will order those when you post the P/Ns. Is that striker arm special order?

Wulfgang wrote:RB20 is engine type, specifically an RB20DET, from a 91-93 Skyline GTS-t (JDM, of course).

I am not sure how Courtesy gets it, but they have other JDM parts on their site.

I dont have a supplier for those yet. I'll probably be posting as soon as I do. Ive tried to look up Skyline stuff but can only get what Nismo and Nissan Motorsports offers.

Wulfgang wrote:While I'm at it, I may as well get a new shifter bellows, 32862, and plate gasket, 32169.

I will order those when you post the P/Ns. Is that striker arm special order?

Boot - 32862-V5002Gasket - 32516-03U11

I dont have that arm. Probably three or four days out for me.

i found out that thing is the gasket. it's the piece go in between the shock mount and the chassis. I need them. how much are they? front and rear

sXi wrote:i found out that thing is the gasket. it's the piece go in between the shock mount and the chassis. I need them. how much are they? front and rear

fer what.

Hey Dan. Just wondering if my exhaust manifold parts came in yet

StreetDreamin wrote:Hey Dan. Just wondering if my exhaust manifold parts came in yet

dantech wrote:Theres a choice between gray/black interior or the tan interior. Its around $125. I'll get you a number when you get me the color.

Tan interior. The fx we have actually has a black/tan interior (leather), The shift knob is still aluminum/black leather, though. I haven't been able to find any pictures on the web of what other tan fx interiors look like. THANKS.

Also for the nismo mounts:

nismo engine & tranny mounts - ka24de same as ka24e? and manual tranny mount same as auto tranny?

I am looking for the gaskets.

the screen shot of the service manual..

circle in red.

I am looking for both front and rear.

brokeAs240sx wrote:
Tan interior. The fx we have actually has a black/tan interior (leather), The shift knob is still aluminum/black leather, though. I haven't been able to find any pictures on the web of what other tan fx interiors look like. THANKS.

Its a number 34910-CG003

brokeAs240sx wrote: Also for the nismo mounts:

nismo engine & tranny mounts - ka24de same as ka24e? and manual tranny mount same as auto tranny?

The mounts will work for either engine. You can find those here: http://www.trademotion.com/par...69182

sXi wrote:I am looking for the gaskets.

the screen shot of the service manual..

circle in red.

I am looking for both front and rear.

What I meant was what kind of vehicle.

oh.. lol.totally misunderstood.for s14

You can find the front ones here: http://www.trademotion.com/par...gid=2

and the back ones are here: http://www.trademotion.com/par...gid=2

Hope this helps.

hey dan, looking for some parts for a friend of mine and wanted to verify.

http://www.trademotion.com/par...gid=1

i'm assuming these are the lines from the clutch dampener to the slave. these are both needed.

also, he is missing the bolts from the propeller shaft into the rubber bushing directly behind the transmission (5speed), he will need all 6 bolts. was unable to locate hardware but it's for a 91 KA24DE S13 5 speed.

if these are available i'd appreciate it if you could post a link to them or part numbers for the bolts.

thanks again man.

austin

austins240 wrote:hey dan, looking for some parts for a friend of mine and wanted to verify.

http://www.trademotion.com/par...gid=1

i'm assuming these are the lines from the clutch dampener to the slave. these are both needed.

also, he is missing the bolts from the propeller shaft into the rubber bushing directly behind the transmission (5speed), he will need all 6 bolts. was unable to locate hardware but it's for a 91 KA24DE S13 5 speed.

if these are available i'd appreciate it if you could post a link to them or part numbers for the bolts.

thanks again man.

austin

Your right on that hydralic lines for the clutch. That sounds like what you need.

The bolts for the prop shaft aren't available separate from the shaft. Ive got a pic of what your talkin about, but Nissan doesnt service it separatly from the shaft, in which case you get the shaft....LOL.... ....sorry, that was a bad pun. Here's the link to that monster: http://www.trademotion.com/par...gid=1

austins240 wrote:hey dan, looking for some parts for a friend of mine and wanted to verify.

http://www.trademotion.com/par...gid=1

i'm assuming these are the lines from the clutch dampener to the slave. these are both needed.

Here is a pic of that Clutch system. This may be a little more helpful with getting the parts that are available from Nissan.

I just ordered the seals. And payed with paypal. After I payed, when I click on the back to merchant botton. I got to a error page. And now I am on the midway account page. but under my order status, it says no record.My payment was succesfully made tho.could you please check for me. My paypal account email is "[email protected]"and my midway account is "[email protected]"I need the parts so bad othewise i cant install my shocks

thank you

sXi wrote:I just ordered the seals. And payed with paypal. After I payed, when I click on the back to merchant botton. I got to a error page. And now I am on the midway account page. but under my order status, it says no record.My payment was succesfully made tho.could you please check for me. My paypal account email is "[email protected]"and my midway account is "[email protected]"I need the parts so bad othewise i cant install my shocks

thank you

I did get your payment and your order. The email never sent out the notification because of the error. Once I get that order in the system I will be sure to notify you. It turns out I dont have either of those parts but will be ordering them for you. What kind of time frame are you working with and I'll see if I can put a rush on them for you at no extra charge?