Let's see everyones engine pics...

Post by **300Plus** » Thu Apr 27, 2006 7:56 am

240SX GT-S wrote:What fans are those that you using?

2 12inch permacool fans they move 3300cfm. cheaper and better then the FALs

Post by **krayton** » Thu Apr 27, 2006 1:08 pm

midnightsliding wrote:heres my engine and aa shot of the engine bay havent got it back in their yet.

and the car..

u are da man

Post by **74260zt** » Thu Apr 27, 2006 4:10 pm

Here is mine, ready to put back in the z car....

Post by **krayton** » Thu Apr 27, 2006 4:40 pm

^ Fing sweet.

curious, what kind of paint is on your intake manifold? what gives it, what looks like, a rough hard feeling

Post by **OKRB20DET** » Thu Apr 27, 2006 8:04 pm

good lord 260,need to adopt anyone?

Post by **AmoebAssassin** » Thu Apr 27, 2006 8:59 pm

74260zt wrote:Here is mine, ready to put back in the z car....

Holy ****!!!

Post by **300Plus** » Fri Apr 28, 2006 2:10 am

Hmmm I haven't seen that motor in awhile. she is alllll grown up now. Did James do the new work as well ?

Post by **blues14** » Sat Apr 29, 2006 5:29 pm

yah.......like i'm gonna post my engine after that rb26

Post by **Kansei240sx** » Sat Apr 29, 2006 9:56 pm

HOLY CHRIST WAGONS 260!

Your car is what i've been wanting to build for ages, but i went ahead and put an RB25DET in my baby.

This summer im going to Twin turbo the L28ET and rebuild it in the 280z.

Post by **300Plus** » Sat May 20, 2006 8:37 am

another

Post by **illdrift** » Fri May 26, 2006 8:51 pm

driveable, not quite road legal yet

Post by **tecnic1** » Sat May 27, 2006 6:40 am

Post by **jdms13rhd** » Sat May 27, 2006 10:06 pm

here is my RB30 I just threw into a A31 Cefiro. I am still tuning it right now with a friend. She is pretty plane *** for now with a RB25 N/A head, 555 RX7 injectors and still running a factory RB20 turbo. When I get a bigger T3T4 I should have lots more fun! She is prwetty slow right now. I can get almost full boost just sitting in nutural reving her up to 4 grand. When I get it back to Canada I will take the engine out and prob sell it with a turbo and thwen build another block I got with a 26 head I got. Either way I will have in the area of 500tq! WHOOT

Post by **red240zenki** » Mon May 29, 2006 10:04 am

This is an old pic...but oh well. lol

Post by **RB280SX** » Mon May 29, 2006 12:23 pm

Sorry for the crap pic. It was taken via my cell phone.

Post by **mazdog355** » Mon May 29, 2006 3:17 pm

I've been holding on to my RB25 for about two years now, and just got it in about a month ago w/ homemade 3" stainless exhaust, Nismo FPR, walbro 255L/hr, FMIC w/ 2.5" piping and manual boost controller running close to 10psi boost... I was impressed...LOL

--->RB25DET

Post by **krayton** » Mon May 29, 2006 7:12 pm

updated pics.

after 3 long and loyal years...

still loyal enough to drive me 30 miles to and from the event and give me 4 rounds of fun on 5 cylinders...

"thats not tire smoke..."

Post by **RB20DETodd** » Mon May 29, 2006 8:34 pm

krayton wrote:updated pics.

after 3 long and loyal years...

still loyal enough to drive me 30 miles to and from the event and give me 4 rounds of fun on 5 cylinders...

"thats not tire smoke..."

that deserves a HO DRIFTA!!!!!!!!!!!!!!!!!

Post by **RB20DETodd** » Mon May 29, 2006 8:37 pm

Nothing new ive done, exept i wraped my cold pipe to the intake mani in header wrap

dsc4130 · Post by **dsc4130** » Wed May 31, 2006 4:20 am

hopefully running soon

Post by **240slidekat** » Wed May 31, 2006 11:26 am

heres mine, not quite done yet

dsc4130 · Post by **dsc4130** » Thu Jun 01, 2006 12:40 pm

that turbo is hugh

Post by **sil820** » Thu Jun 01, 2006 1:31 pm

got dayum....!!! 260 that motor looks brand new what parts have you replaced?

Post by **RB20DETodd** » Thu Jun 01, 2006 3:11 pm

240slidekat wrote:heres mine, not quite done yet

lookin good!!!!

Post by **300Plus** » Mon Jun 05, 2006 7:45 am

300Plus wrote:another

and after a little polishing...

Modified by 300Plus at 10:56 AM 6/5/2006

Post by **aznromeox** » Tue Jun 06, 2006 8:43 pm

http://videos.streetfire.net/s...9.htm731hp dyno

Twin 3" downpipes to hand made 4" collector then exhaust...15degree pie sliced exhaust. Burns stainless. 4" 16 gaugeR34 motor 4500km, HKS 272 Cams, HKS manifolds, hks gt3037r 52trim turbos, tial 40mm wastegates4" cold pipe to greddy intake manifold

[IMG][/IMG]

Post by **aznromeox** » Tue Jun 06, 2006 8:51 pm

Other carcurrent picture of the car

if you pay attention carefully. Notice all the bumps and holes have been metal shrunk and or welded. Over 100 hours into engine bay body work. And well over another 100 into the install and fab of the motor ITS turbo

Random fact: s14 power steering resovior. About 5 hours into rewelding the bracket to make it work for s13

Thanks for checking out the pictures.If you have any questions or comments email me. [email protected]

-Ronaldjdmimportsdirect.com

Post by **krayton** » Tue Jun 06, 2006 8:54 pm

holy ish that is freakin sweet.

did u do that yourself??? mad props to whoever fabricated that. it is awesome work.

and what kind of paint/stuff is on your intake manifold and valve cover!!??

Post by **Reignman** » Tue Jun 06, 2006 10:52 pm

Here is a pic of my RB25. Hopefully I will have it in the car soon.

Post by **armysweitzer** » Wed Jun 07, 2006 5:23 am

yeah im pretty sure I want to murder you and jack your car.

jk its hot...all of it

Let's see everyones engine pics...

Re: (240SX GT-S)

Re: (midnightsliding)

Re: (krayton)

Re: (74260zt)

Re: (AmoebAssassin)

Re: (300Plus)

Re: (240SX GT-S)

Re: (300Plus)

Re: (illdrift)

Re: (NightKids2)

Re: (Carl H)

Re: (red240zenki)

Re: (mazdog355)

Re: (krayton)

Re: (NightKids2)

Re: (RB20DETodd)

Re: (240slidekat)

Re: (240slidekat)

Re: (300Plus)

Re: (NightKids2)

Re: (aznromeox)

Re: (aznromeox)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums