You should probably check your sidemarker housing assembly. Unlike the FSM, my assembly is one piece and it cannot be open to change the bulb.SimonSaysM35 wrote:SimonSaysM35 wrote:OK guys, i need your help. Im about to place my order and need to make sure I chose the correct products. Frankly, I have no idea what to expect. Your help is greatly appreciated!! Any info about if these lights will work correctly or info about what to expect to happen would be great!
1. Parking light (front) lil bulb: http://www.v-leds.com/Interior-LED/Gaug ... 38587.html
2. Side Marker turn signal working light (orange/front panels): http://www.v-leds.com/Exterior-LED/Corn ... 94231.html
3. Turn signal working light (orange/front): http://www.v-leds.com/Exterior-LED/Park ... 10365.html
4. Turn signal working light (orange/rear): http://www.v-leds.com/Exterior-LED/Park ... 10365.html
5. Reverse/Back-up light (rear): http://www.v-leds.com/Exterior-LED/Park ... 82918.html
6. License plate light (rear): http://www.v-leds.com/Exterior-LED/Corn ... 78377.html
Im worried that there might be the "fast blinking" and so forth, especially the side marker turn signal light on the front panels. Thanks in advance!!
Anyone mind helping me out with #'s 2, 3 & 4, please? Thanks in advance!
thats crazy...how did you pop yours out?...zerg711 wrote:Anyone with a 08+ successfully change their front sidemarker bulbs to LED? I opened mine up and it is a single piece that cannot be twisted off.... The only way to change the bulb is to put it in the oven and bake it...
Thanks. I had the others (I went to every bulb and unplugged it and read the number) but couldn't find the ones above. I figured there were alternates.06M4.5 wrote:2006 M45
parking light near hi-beam. I used 194
the 2 front map lights. BA9 but I used panel smd
the 2 rear map lights, 1 on top of each rear door. I used 31mm festnoon 6 smd led.
lights on each door 194
lights under steering wheel & glove box 194 with no covers.
side marker on fender 194 (no more yellow)
http://www.v-leds.com/BlinkerWarning-Fi ... 8-1-2.html06M4.5 wrote:I did all the leds in my car. 2006 M45
and I have the hyper blink only when turning left or right.
I don't have it when the hazard lights are on.
I like it, it makes it look sportier.
Thanks man!06M4.5 wrote:i used a board like this for each front map light:
http://cgi.ebay.com/ebaymotors/Flux-Fes ... ccessories
and this for the rear:
http://cgi.ebay.com/ebaymotors/2-31mm-1 ... ccessories
Any issues with your leds flickering because of the auto dimming? I asked this question before but I don't remember if anyone answered.06M4.5 wrote:2006 M45
parking light near hi-beam. I used 194
the 2 front map lights. BA9 but I used panel smd
the 2 rear map lights, 1 on top of each rear door. I used 31mm festnoon 6 smd led.
lights on each door 194
lights under steering wheel & glove box 194 with no covers.
side marker on fender 194 (no more yellow)
I agree with this. A mix of both HID and halogen will yield the best results IMO. I went with the Slyvania Silverstar Ultras. They work great and look good too.IlyaKol wrote:I recommend non-HID bulbs in the high-beam. It takes too long for them to get cooking to be useful.
I'm running Sylvania Xtravisions (supposedly really good in inclement weather). That was the best halogen bulb in the Maxima world, so I can't imagine it's much different for other cars.
I went ahead and ordered these myself, and I'm looking forward to seeing how well they will perform.IlyaKol wrote:Thanks man!06M4.5 wrote:i used a board like this for each front map light:
http://cgi.ebay.com/ebaymotors/Flux-Fes ... ccessories
and this for the rear:
http://cgi.ebay.com/ebaymotors/2-31mm-1 ... ccessories
Might be a little brighter due to the camera/rain but here is the output.DoN_BLaZe34 wrote:Ilyakol, yeah pictures of the output, thanks
Freddie, thanks for the follow up