Ka24de With Megasquirt-1 Extra Code

A place to discuss the systems and methods of tuning Nissan engines.
slinginabullet
Posts: 9
Joined: Mon Mar 21, 2011 8:53 am
Car: 78 620 king cab
89 240sx hatch
Location: Winston Salem NC

Post

So I did some searching and not much on tuning for Ka other than bolt ons. I'm currently in the process of tuning and would like to share, collaborate with other MS users. I am running the MS extra code 029y3 with MSnS ignition set up for the stock ignition I am also using the OEM spark map. My fuel map is slowly coming along, but still needs lots of tuning. Dwell settings I'm still playing with but should have dialed in real soon.

Just thought I would throw this out to see if there is any interest


User avatar
neverlift
Posts: 3700
Joined: Mon Apr 24, 2006 6:26 am

Post

stock dizzy? what ignitor did you use? I have an ms1 v2.2 I never could get it to stop kicking back on start up and I was frying power transistors left and right

slinginabullet
Posts: 9
Joined: Mon Mar 21, 2011 8:53 am
Car: 78 620 king cab
89 240sx hatch
Location: Winston Salem NC

Post

Ya stock dizzy, coil and module using v3.0 board. I have my dwell set at 6 milliseconds start and 1 milliseconds running. No kick back at all and starts right up. I did one mod to my board to run the stock ignition I'm using only two of the three wires on the transistor though. Black to ground and light green black stripe to - side of coil and tach.


Return to “Engine Tuning”