homeslicej2 wrote:Since we're all gay

Did someone say gangbang

Frank E Bones wrote:

homeslicej2 wrote:Since we're all gay

Did someone say gangbang

I don't know whether to or

Oh don't act like you don't know.

^we should call you fruity-bones lol

spooled240 wrote:^we should call you fruity-bones lol

Btw, how was GMR?

Oh Frank, here's a write-up Josh did on the S14's gauge cluster.
how-to-do-different-color-gauges-by-sim ... 76385.html

spooled240 wrote:^we should call you fruity-bones lol

Hey WD started this s*** not me.

i know some one selling a 240 rb20... he wants 5k for it... btw i drunk bitchezz

Razi wrote:

spooled240 wrote:^we should call you fruity-bones lol

Btw, how was GMR?

Oh Frank, here's a write-up Josh did on the S14's gauge cluster.
how-to-do-different-color-gauges-by-sim ... 76385.html

we didn't go since we got lazy lol

Frank E Bones wrote:

spooled240 wrote:^we should call you fruity-bones lol

Hey WD started this s*** not me.

Dude, when the gay flag came out you grabbed it and ran with it like a scalded Ethiopian on his way to a buffet.

I walked into a conversation the other day, just as it was coming to a close I said..."so there I was, balls deep in this other dude"...

WDRacing wrote:Dude, when the gay flag came out you grabbed it and ran with it like a scalded Ethiopian on his way to a buffet.
I walked into a conversation the other day, just as it was coming to a close I said..."so there I was, balls deep in this other dude"...

Please watch,

http://www.southparkstudios.com/full-ep ... rsey-thing

spooled240 wrote:we didn't go since we got lazy lol

Bahaha I come back and all you guyz is ****s now?


I welded my manifold studs in, as well welded stainless studs to my turbo outlet elbow deal so I should have a nice leak-free exhaust system now. I can't wait until everything is back together, it's been far too long since I've driven el carro.

Damn I wish all you fockers lived out here. We celebrated my nephews 18th birthday last night (dude on the left) Almost everyone there did at least 4-5 of these, and had more than a few shots. Was a fun night, but no strippers though Maybe when he turns 21

Chris28 wrote:Bahaha I come back and all you guyz is ****s now?


I welded my manifold studs in, as well welded stainless studs to my turbo outlet elbow deal so I should have a nice leak-free exhaust system now. I can't wait until everything is back together, it's been far too long since I've driven el carro.

I'm gonna work on the manifold tonight.
Ugh.

Frank E Bones wrote:Damn I wish all you fockers lived out here. We celebrated my nephews 18th birthday last night (dude on the left) Almost everyone there did at least 4-5 of these, and had more than a few shots. Was a fun night, but no strippers though Maybe when he turns 21

LMAO.

Razi wrote: I'm gonna work on the manifold tonight.
Ugh.

Yeah, it sucks. Your's will most likely be easier than mine though, one of my outlet elbow to downpipe bolts was seized, so I had to get the elbow off the turbo while it was still attached to the downpipe, then disconnect the downpipe from the cat and take it out as one piece. It took about 10 minutes with a sawzall to cut through the bolt, it was ridiculous.

I put a really thick copper manifold flange gasket in, it should be worth it since you can re-use them and they seal around imperfections since it's so malleable. Supposedly pool time should even increase

went auto crossing this weekend. saturday just went to watch. rode in the funnest car i have ever been in...

can you say 400+ wheel HP STI!!!






look at those brakes!!

barely fits with 18's

and my friends mostly stock rx7 still fast though on all 4 stickies

today (sunday) i raced an 05 black STI that a guy offered me to drive lol. hella fun when i got the hang of it. hell of a lot different than a 240. i got a 63.18 (best time) and top time of the day was from a tube chassis car and it was like 58.98 and top time for a full bodied car was 60.15 or so... so all in all driving a completely different car than im used to i felt i did pretty good. i was stoked!

and my coworker made this.......


ENJOI

Chris28 wrote: I put a really thick copper manifold flange gasket in, it should be worth it since you can re-use them and they seal around imperfections since it's so malleable. Supposedly pool time should even increase

Where'd you get the gasket?
I want one for when I have to do it again.

Looks like fun Moto!
Where was the autocross event held at?

it was at the local drag strip parking lot. it is probably the worst pavement for an auto cross event, but its the only place we can find

damn 400awhp must be fun lol the 2.5 STi engine feels kind of like a KA-T huh? it's got that low end torque

Frank E Bones wrote:Damn I wish all you fockers lived out here. We celebrated my nephews 18th birthday last night (dude on the left) Almost everyone there did at least 4-5 of these, and had more than a few shots. Was a fun night, but no strippers though Maybe when he turns 21

we gotta set up a kat vs. ka party where we all get hammered lol

Razi wrote: Where'd you get the gasket?
I want one for when I have to do it again.

http://www.scegaskets.com/SCE-Pro-Coppe ... 30210.html


They make copper head gaskets too, but I'm not sure if they are o-ringed or if the engine needs to be o-ringed in order to use them. WD...what do you know about copper head gaskets?

one of you east coast dudes buy these

http://zilvia.net/f/wheels-tires/347071 ... 300-a.html

someone paypal me 100 bucks and ill let them borrow this bee r im so broke this week and need monies for gas for work. ill buy it back in awhile when i need it lol. so until then you get a bee r for 100 bucks lol. or buy it from me for 200. fml

spooled240 wrote:we gotta set up a kat vs. ka party where we all get hammered lol

Oh hell yeah, but since only a few if us would be able to attend, were going to have to drink a little "extra" for the ones who couldnt make it.

Were going to Halloween Horror Nights @ Universal Studios this Sat Its gonna be about 11 of us so it should be fun. Ive never been to one of those things, ima skeered!!!

we gotta wait for b to come down well make a welcoming part lol

Chris28 wrote: http://www.scegaskets.com/SCE-Pro-Coppe ... 30210.html


They make copper head gaskets too, but I'm not sure if they are o-ringed or if the engine needs to be o-ringed in order to use them. WD...what do you know about copper head gaskets?

I wondered about this awhile back to bc many people run copper exhaust gaskets and turbo gaskets (I have a Mr. Copper exhaust manifold gasket on my SR) I thought the info in this article was helpful without being too long.
http://www.enginebuildermag.com/Article ... skets.aspx

Spooled, great deal, too bad it's just two, plus I'm still super sucky 4-lug

Chris28 wrote:

Razi wrote: Where'd you get the gasket?
I want one for when I have to do it again.

http://www.scegaskets.com/SCE-Pro-Coppe ... 30210.html


They make copper head gaskets too, but I'm not sure if they are o-ringed or if the engine needs to be o-ringed in order to use them. WD...what do you know about copper head gaskets?

Awesome!
Thanks!

homeslicej2 wrote:

Chris28 wrote: http://www.scegaskets.com/SCE-Pro-Coppe ... 30210.html


They make copper head gaskets too, but I'm not sure if they are o-ringed or if the engine needs to be o-ringed in order to use them. WD...what do you know about copper head gaskets?

I wondered about this awhile back to bc many people run copper exhaust gaskets and turbo gaskets (I have a Mr. Copper exhaust manifold gasket on my SR) I thought the info in this article was helpful without being too long.
http://www.enginebuildermag.com/Article ... skets.aspx

Spooled, great deal, too bad it's just two, plus I'm still super sucky 4-lug

just re-drill your hubs lol the guys taking 250 now I was gonna have briz get em for me but i'm gonna borrow his BEE*R rev limiter instead

I have z32 rear hubs sitting in my room, but then I ran out of money haha. There's a local guy selling 17x9 +0 Hot Wheels for $300, I really want to scoop those up.