I need a working gearbox.

[Giallo spyder met]

What gearbox should i use?It has to handle atleast 600hp and fast shifting at almost 9000rpm.

[bentvalves]

if you wanna ball out get a z32 trans out of a 300zx twin turbo.

that will handle anything you can throw at it with 1.8 litres.

[Giallo spyder met]

if you wanna ball out get a z32 trans out of a 300zx twin turbo.

that will handle anything you can throw at it with 1.8 litres.

Whats the gear ratio?Do i get more topspeed in third gear?

[Giallo spyder met]

if you wanna ball out get a z32 trans out of a 300zx twin turbo.

that will handle anything you can throw at it with 1.8 litres.

But how do i get it to fit my ca18det???

[bentvalves]

an adapter plate needs to be fabricated.

Dont quote me but I feintly remember Mazworks making one for sr20det?

I never looked into z32 internal gearing, so I cannot answer that question for you.

[mod_mastaz]

Check the FSM for internal gearing.

Here's a little how-tohttp://www.sxoc.com/vbb/showthread.php?t=267978

GL and have fun! It's gonna cost money and knowledge.

[ca18detgabby]

an adapter plate needs to be fabricated.

Dont quote me but I feintly remember Mazworks making one for sr20det?

I never looked into z32 internal gearing, so I cannot answer that question for you.

mazworx will make an adapter plate for just about anything.

since the Z32 trans is used on the RBs(from what i understand anyways) it seems like the logical choice. maybe an RB25 trans wouldnt be a horrid choice either.

[r34 gtr]

Get the ZF gearbox out of an e46 m3. 100% indestructible. Someone was using one on their car because the 800bhp it was putting out was ripping apart stock s-chassis gearboxes left and right. Forget who, think I saw it in a magazine when I was visiting my grandpa in England.

Another good choice is the Tremec 6060 out of the new Corvette ZR1 and Cadillac CTS-V. If it can handle 556 supercharged horses, you should be set.