i've read your post, and followed all the instructions on the thread... i did a full 5 speed swap in my 93 hatch.. except for jumper the park/neutral safety switch... so my engine won't turn over.. i looked at your pictures and descriptions.. but i'm still lost as to how i should "jumper" these wires.. and which wires go where..Hijacker wrote:as far as those three plugs on the bottom,the only one that does is park/neutral safety switch. That's the one you have to jumper up underneath the fuse box. Without it jumpered, I don't think the car will even try to turn over.
i just did my swap and it won't start.. i need to do this portion but im confused.. can someone give me detailed steps and pictures how to "jumper" the wires needed to make the car start? sadly i cannot see a few of the pictures posted by Hijacker.. i don't want to mess this up so some help would be nice.Hijacker wrote: It's a small 2 prong connector with two thick wires. One white, one black.
you can see it poking out from under the bottom of the fuse box (i had removed the upper portion when i took that picture). Jumper that connector to get your car started
for the drill bit i used a 1 3/4 (one and three-fourths) hole saw bit i got from home depot for like. .. .. 15ish bucks.. if that doesn't work then drill all around the perimeter of the outline where the clutch ms goes.. then use a chisel and hammer to knock it out.. have a buddy hold a block of wood on the inside while you chisel it from the engine bay.. then just smooth it out with a grinder drill bit..xxyournoonexx wrote:I've herd of it being used, but I don't think it's possible. Try a junkyard somehwere. Shouldn't be TOO hard to find. only thing is actually getting it off the car.
Does anyone know exactly what size drill-bit or what size hole need to be done for the clutch master cylinder? I need to know.
how did you do it exactly? i still have to jumper the wires but like you i dont wuna mess it up .. which wires do i need to jumper and to where and how??? im completely done with my 5speed swap.! this is the last step!!!pinky121388 wrote:nevermind its all fixed. i just didnt look hard enough..