High Pressure Power Steering Hoses for the Masses!

A forum for approved vendors of specialized, limited-production parts. Help small businesses that cater to Nissan enthusiasts and score some unique, useful parts! Contact [email protected] for approval and rates.
User avatar
rb24t
Posts: 232
Joined: Sat Sep 29, 2007 5:56 am
Car: not so pretty but not so slow

Re: High Pressure Power Steering Hoses for the Masses! (DJButton)

Postby rb24t » Mon Jul 07, 2008 4:08 pm

i dont mean to beat a dead horse but the line you supply me for 75 bucks will be long enough to go from the rack to the rb25 pump and have the correct bends and fittings?

the rb sits so far forward i just want to make shure its long enought?

if so i will paypal you the 75.00 bucks on wed

thanks man and thanks for making these available your a life saver.


User avatar
outtacontrol240
Posts: 255
Joined: Thu Sep 15, 2005 5:23 pm

Re: High Pressure Power Steering Hoses for the Masses! (DJButton)

Postby outtacontrol240 » Tue Jul 08, 2008 3:59 am

DJButton wrote:Hey Cali guys, did the lines come in yet?

$75 shipped, my paypal is [email protected]. Thanks man!


no not yet dj ....i haven 't heard anything from the postman....i know it's no your fault but .....dam i neeeeeddddd this ahhahhah....hhahaahah

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA

Re: High Pressure Power Steering Hoses for the Masses! (outtacontrol240)

Postby DJButton » Tue Jul 08, 2008 4:49 pm

Well I know it got shipped, cause I double checked and the only one I was waiting on to ship out is Ken's in OK, and that goes out tomorrow, I dunno man, taking them forever.
rb24t wrote:i dont mean to beat a dead horse but the line you supply me for 75 bucks will be long enough to go from the rack to the rb25 pump and have the correct bends and fittings?

the rb sits so far forward i just want to make shure its long enought?

if so i will paypal you the 75.00 bucks on wed

thanks man and thanks for making these available your a life saver.
It's almost always longer then need be I'll have him throw on an extra 3" or so though for yours, just to make sure.

User avatar
outtacontrol240
Posts: 255
Joined: Thu Sep 15, 2005 5:23 pm

Re: High Pressure Power Steering Hoses for the Masses! (DJButton)

Postby outtacontrol240 » Wed Jul 09, 2008 12:32 am

there is no way to get a tracking number on the hoses...so i can check with the ups or post office on it....by the way wat company did you send it with...thx

User avatar
rb24t
Posts: 232
Joined: Sat Sep 29, 2007 5:56 am
Car: not so pretty but not so slow

Re: High Pressure Power Steering Hoses for the Masses! (outtacontrol240)

Postby rb24t » Wed Jul 09, 2008 12:05 pm

i just sent payment via paypal!

can you send me a tracking number once it has shipped?

thanksdonovan

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA

Re: High Pressure Power Steering Hoses for the Masses! (rb24t)

Postby DJButton » Mon Jul 14, 2008 2:54 pm

Will definitely start doing tracking numbers as one guy in California is still yet to recieve his and I'm sending him another, very uncool.

For those of you who are also waiting but I haven't told you it was shipped yet that's because I'm STILL waiting on fittings, I guess the supplier of my supplier was waiting on them or something ridiculous like that. Anyhow I will post up/email you as soon as they have been shipped.

As always, thanks for the patience and most of all the business! It's always nice to hear good reviews when your're a brand new company. Now selling DMAX and Supermade products by the way, e-mail for qoutes on anything and will have a webpage up soon!

Dan ButtonFujii SPL Special Tuning Factory

User avatar
outtacontrol240
Posts: 255
Joined: Thu Sep 15, 2005 5:23 pm

Re: High Pressure Power Steering Hoses for the Masses! (DJButton)

Postby outtacontrol240 » Tue Jul 15, 2008 1:59 am

thx dj im the guy from california that never received his hose im sorry for all the email i sent you.......i know its not your fault....

for all the peeps out there he is really a good guy....always email me back on all the overloads email i sent him thx a lot hope i get it this time

rob808
Posts: 61
Joined: Thu May 22, 2003 12:34 am
Car: 89' s13

Re: High Pressure Power Steering Hoses for the Masses! (outtacontrol240)

Postby rob808 » Fri Jul 18, 2008 1:08 pm

Hey Dan sorry to bring this back up but are you still making these hoses? if so do you have any made for the SOHC KA? Im not sure where the leak is coming from since the engine bay area is sooo dirty but im hoping your product would help alleviate the problem. been putting this off for too long already and just getting tired of doing the weekly refills. How much for shipping to 96817? Mahalo!

Rob

User avatar
rb24t
Posts: 232
Joined: Sat Sep 29, 2007 5:56 am
Car: not so pretty but not so slow

Re: High Pressure Power Steering Hoses for the Masses! (rob808)

Postby rb24t » Thu Jul 24, 2008 12:49 pm

hey man any idea on my power steering line rb25-s13 ? i havent heard from you in a while and you have not responded to my emails?

im just curious.

[email protected]

User avatar
rb24t
Posts: 232
Joined: Sat Sep 29, 2007 5:56 am
Car: not so pretty but not so slow

Re: High Pressure Power Steering Hoses for the Masses! (rb24t)

Postby rb24t » Sat Jul 26, 2008 7:44 pm

anyone heard anything from this guy?

i cant get a response from him on here or via email, im getting worried?

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA

Re: High Pressure Power Steering Hoses for the Masses! (rb24t)

Postby DJButton » Sat Jul 26, 2008 10:19 pm

E-mails aren't going thru then or something man, I check at least twice a day. Anyhow, there ended up being a huge wait on fittings for the lines and all sorts of crap went sideways, just got 20 lines in the other day and sent out. Anyone who was waiting should be seeing it mid next week.

Again, terribly sorry for the wait, it was unavoidable. I believe there are three of you still waiting and I do apologize. I'm now having everything pre-made so I can just turn around and ship it when it's ordered. 10 lines in stock right now, so no worries. I'll have tracking numbers on Monday so USPS can't screw me over and lose them again.

Thanks again everyone,DJ

User avatar
rb24t
Posts: 232
Joined: Sat Sep 29, 2007 5:56 am
Car: not so pretty but not so slow

Re: High Pressure Power Steering Hoses for the Masses! (DJButton)

Postby rb24t » Mon Jul 28, 2008 10:52 am

did you make mine longer for the rb25-s13 ?

User avatar
cinek10
Posts: 106
Joined: Mon Jul 24, 2006 3:17 pm
Car: 2008 Altima 3.5 SE / 1990 240sx

Re: High Pressure Power Steering Hoses for the Masses! (rb24t)

Postby cinek10 » Tue Jul 29, 2008 8:34 am

Payment sent this morning...

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA

Re: High Pressure Power Steering Hoses for the Masses! (rb24t)

Postby DJButton » Tue Jul 29, 2008 7:22 pm

rb24t wrote:did you make mine longer for the rb25-s13 ?
Yup, good to go! Should be seeing it any day now!
cinek10 wrote:Payment sent this morning...
Awesome, thanks for the business! Line will be on it's way!

User avatar
rb24t
Posts: 232
Joined: Sat Sep 29, 2007 5:56 am
Car: not so pretty but not so slow

Re: High Pressure Power Steering Hoses for the Masses! (DJButton)

Postby rb24t » Wed Jul 30, 2008 11:50 am

got it today, thanks

it seems to be long enough and looks great im very pleased, thanks again for hooking me up.

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA

Re: High Pressure Power Steering Hoses for the Masses! (rb24t)

Postby DJButton » Wed Jul 30, 2008 3:15 pm

rb24t wrote: got it today, thanks

it seems to be long enough and looks great im very pleased, thanks again for hooking me up.
Anytime man, glad you got the line hope it works out great for you! If there are any complaints let me know and I'll get is fixed!

User avatar
89240SXCoupe
Posts: 27
Joined: Fri Apr 18, 2008 7:12 pm
Car: 1989 Nissan 240SX Coupe XE

Re: High Pressure Power Steering Hoses for the Masses! (DJButton)

Postby 89240SXCoupe » Sun Aug 03, 2008 7:41 pm

Hey im in need of some lines for my rb20 swap, going from a sohc setup.. If you could lengthen them a bit for me as i believe that im going to have the same problem that rb24t did, thanks in advance.

if you're able to make them longer and have them ready soon, i should be able to send out a payment soon so ill keep you posted through email.

rob808
Posts: 61
Joined: Thu May 22, 2003 12:34 am
Car: 89' s13

Re: High Pressure Power Steering Hoses for the Masses! (89240SXCoupe)

Postby rob808 » Sun Aug 03, 2008 11:17 pm

still wondering if you can make any for a SOHC KA? if so shipping quote to 96817 please? thanks!

Rob

User avatar
cinek10
Posts: 106
Joined: Mon Jul 24, 2006 3:17 pm
Car: 2008 Altima 3.5 SE / 1990 240sx

Postby cinek10 » Mon Aug 04, 2008 2:54 am

I got my line on friday! Finally got to drive my car without my home made PS line blowing off...Thanks!
Modified by cinek10 at 6:05 AM 8/4/2008

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA

Re: High Pressure Power Steering Hoses for the Masses! (89240SXCoupe)

Postby DJButton » Mon Aug 04, 2008 3:18 pm

89240SXCoupe wrote:Hey im in need of some lines for my rb20 swap, going from a sohc setup.. If you could lengthen them a bit for me as i believe that im going to have the same problem that rb24t did, thanks in advance.

if you're able to make them longer and have them ready soon, i should be able to send out a payment soon so ill keep you posted through email.
I can certainly do that, shoot me an e-mail at [email protected] or [email protected].
rob808 wrote:still wondering if you can make any for a SOHC KA? if so shipping quote to 96817 please? thanks!

Rob
Yo, still haven't done one for a SOHC, have a friend coming Saturday though with a SOHC and planning on measuring it out then. it will delete the sensor as the other lines do as well, and straight to the rack most likely. Oh and $75 shipped for the line.
cinek10 wrote:I got my line on friday! Finally got to drive my car without my home made PS line blowing off...Thanks!
Great, glad it worked out for you, again sorry about the wait!

rob808
Posts: 61
Joined: Thu May 22, 2003 12:34 am
Car: 89' s13

Re: High Pressure Power Steering Hoses for the Masses! (DJButton)

Postby rob808 » Mon Aug 04, 2008 4:22 pm

DJButton wrote:
Yo, still haven't done one for a SOHC, have a friend coming Saturday though with a SOHC and planning on measuring it out then. it will delete the sensor as the other lines do as well, and straight to the rack most likely. Oh and $75 shipped for the line.
Great to hear Dan! Hope it works out well. Will it come with instructions too on installation? Just thought id ask since ive never had anything that needed replacing other than a radiator hose . Ill be sending in payment next week thursday.

User avatar
outtacontrol240
Posts: 255
Joined: Thu Sep 15, 2005 5:23 pm

Re: High Pressure Power Steering Hoses for the Masses! (DJButton)

Postby outtacontrol240 » Tue Aug 05, 2008 2:21 pm

thx dj i got it at last and installed thx for the help and sry about the emails...these line are the shizznits

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA

Re: High Pressure Power Steering Hoses for the Masses! (outtacontrol240)

Postby DJButton » Tue Aug 05, 2008 6:10 pm

outtacontrol240 wrote:thx dj i got it at last and installed thx for the help and sry about the emails...these line are the shizznits
Thanks man, happy it finally made it!!

BustaGwoove
Posts: 26
Joined: Thu May 24, 2007 8:34 am
Car: '90 240sx hb

Re: High Pressure Power Steering Hoses for the Masses! (DJButton)

Postby BustaGwoove » Thu Aug 07, 2008 2:40 pm

Hey man, I'm really interested in a high pressure line for a ka24de. Problem is I'm kind of on a time frame and I would need the lines asap. Can you shoot me an email at [email protected] with how long you think you could fabricate a line and have it shipped out to Chicago? Thanks a lot!

User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA

Re: High Pressure Power Steering Hoses for the Masses! (BustaGwoove)

Postby DJButton » Thu Aug 07, 2008 8:45 pm

BustaGwoove wrote:Hey man, I'm really interested in a high pressure line for a ka24de. Problem is I'm kind of on a time frame and I would need the lines asap. Can you shoot me an email at [email protected] with how long you think you could fabricate a line and have it shipped out to Chicago? Thanks a lot!
Paypal is [email protected],DJ

azsalah
Posts: 3
Joined: Sat Aug 02, 2008 10:53 pm
Car: 1989 nissan 240sx with ka24de swap

Re: High Pressure Power Steering Hoses for gththe Masses! (DJButton)

Postby azsalah » Sat Aug 09, 2008 12:13 pm

Hello, I need a hose for an '89 240sx that has the engine swaped for a KA24de . Can you make a hose that fits this setup? . If you can provide this then please let me know and I'll paypal the amout to you. Thanks.


User avatar
DJButton
Moderator
Posts: 5605
Joined: Tue Mar 22, 2005 6:38 pm
Car: 2010 Nissan 240sx
Location: New Hampshire, USA

Re: High Pressure Power Steering Hoses for gththe Masses! (azsalah)

Postby DJButton » Sun Aug 10, 2008 6:41 am

azsalah wrote:Hello, I need a hose for an '89 240sx that has the engine swaped for a KA24de . Can you make a hose that fits this setup? . If you can provide this then please let me know and I'll paypal the amout to you. Thanks.
Sure thing man, have a couple sitting on the shelf right now! Let know if you want one!

Now offering SOHC lines too!

rob808
Posts: 61
Joined: Thu May 22, 2003 12:34 am
Car: 89' s13

Re: High Pressure Power Steering Hoses for gththe Masses! (DJButton)

Postby rob808 » Sun Aug 10, 2008 7:48 am

DJButton wrote:
Sure thing man, have a couple sitting on the shelf right now! Let know if you want one!

Now offering SOHC lines too!
Sweet. Been waiting for this. Cant wait to send my payment in to ya Dan. Any pics of them installed?

azsalah
Posts: 3
Joined: Sat Aug 02, 2008 10:53 pm
Car: 1989 nissan 240sx with ka24de swap

Re: High Pressure Power Steering Hoses for gththe Masses! (DJButton)

Postby azsalah » Sun Aug 10, 2008 6:29 pm

DJButton wrote:
Sure thing man, have a couple sitting on the shelf right now! Let know if you want one!

Now offering SOHC lines too!
Thanks a lot. I'll take one and payment has been sent.

User avatar
(Yoshi)
Posts: 503
Joined: Sat Dec 11, 2004 3:39 pm
Car: Black 1991 Nissan 240SX Fastback

Postby (Yoshi) » Tue Aug 12, 2008 9:23 pm

I will be ordering lines from you in a few paychecks... Just fyi...(^_-)


Return to “Fabricators' Market”