Head Gaskets

Post by **DriFt3r** » Wed Oct 22, 2003 5:18 pm

Where can I find some for the 95^ motors cause I've only seen them listed for the 91-94's

Post by **andrave** » Wed Oct 22, 2003 5:18 pm

I thought they were all the same.hmm...

Post by **DriFt3r** » Wed Oct 22, 2003 5:18 pm

I went to ka24de and they only have them listed for the 91-94. So what your sayin is that I can use them right? thanks now where can I find metal head gaskets? I also heard that stock gaskets can hold up to 25 psi of boost is that true?

Post by **klattr1** » Wed Oct 22, 2003 5:18 pm

go to your local nissan dealer to get a stock one or get a fel-pro through your local auto parts store or get a 1mm metal headgasket through cometic for like $78.

Post by **DriFt3r** » Wed Oct 22, 2003 5:18 pm

cometic.com right

Post by **andrave** » Wed Oct 22, 2003 5:18 pm

raceeng.com sells cometics... I've heard its better to use the stock one though.

Post by **TrunkMonkey** » Wed Oct 22, 2003 5:18 pm

the oem head gasket is the best.

-demetrius

Post by **DaveEEE** » Wed Oct 22, 2003 5:18 pm

I went through 3 Nissan headgaskets and one felpro in 2 months.... however my head was warped so that didn't help. Running a cometic HP now, all has been good for 1000 miles.

-Dave

Post by **TrunkMonkey** » Wed Oct 22, 2003 5:18 pm

i don't know of any type of head gasket that would last long with a warped cylinder head.

-demetrius

Post by **ka24detkyle** » Wed Oct 22, 2003 5:18 pm

This place will also make metal head gaskets...

http://www.paeco.com/

Kyle Bennett

Post by **WDRacing** » Wed Oct 22, 2003 5:18 pm

Stock will work unless your going for big numbers. Until your running 20 psi daily, I wouldn't worry about the HG much.

WD

Post by **240marcuSX** » Wed Oct 22, 2003 5:18 pm

wow kyle, is that your car in your sig? looks really nice :drooling

Post by **ka24detkyle** » Wed Oct 22, 2003 5:18 pm

Yup that's mine....however i'll be replacing my wing with a new drift wing. Not the normal type you see on all the other cars...this one is really rare from Japan. Can't wait!!

Kyle Bennett

Post by **huguetpj** » Wed Oct 22, 2003 5:18 pm

ka24detkyle wrote:Yup that's mine....however i'll be replacing my wing with a new drift wing. Not the normal type you see on all the other cars...this one is really rare from Japan. Can't wait!!

Kyle Bennett

What is a drift wing? Hell... what makes it a drift wing?

Post by **ka24detkyle** » Wed Oct 22, 2003 5:18 pm

It a style of wing. It sits close to the trunk so there is no gap between the bottom of the wing and the trunk lid surface. That's a vauge example but that's the idea.

Kyle Bennett

Post by **huguetpj** » Wed Oct 22, 2003 5:18 pm

Thanks... once you get it take pics and post them.

Post by **ka24detkyle** » Wed Oct 22, 2003 5:18 pm

Will do, but it'll be a few months. I got a ton of other projects going on right now.

Kyle Bennett

Post by **huguetpj** » Wed Oct 22, 2003 5:18 pm

ka24detkyle wrote:Will do, but it'll be a few months. I got a ton of other projects going on right now.

Don't we all

Head Gaskets

Head Gaskets

hey

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums