Hey guys.
Its not looking too good for me ... making it to labor day weekend for the car meet is going to be almost impossible if i dont sell some of this s***. tell your friends, family, whatever to buy some stuff :p
S14 / RB Parts For Sale
– S14 Sunroof Weather stripping Brand new in box from dealership, $70
– R34 RB25DET Neo Exhaust camshaft. Make offer
– RB25 Head studs OEM used, not sure of mileage. Make offer $50
– S14 left front corner light, broken top tab, and small internal crack on lenses, but does not leak, still useable with other mounting points. $30
– RB25 neo upper intake plenum gasket rubber, have two of these, $18
– JDM Navan S14 oem front amber corner lights, new in box, $80
– S14 sunroof assembly complete minus fiberglass trim ring around outer edge of glass. Comes with drain tubes as well. $ Make offer, prefer pickup only, large item
– S14 SE sunroof headliner, great shape no stains, cracks, etc. Pick-up only $50
– S14 SE sunroof headliner trim ring around pull shade, $40
– S14 SE overhead light console with sunroof switches $35
– S14 M-sport D-style FRP +20mm wide front fenders new in box, $290, buyer pays shipping, large box approx $110 to ship
– S14 SE airbag control module $90
– S14 SE airbag control harness $50
– S14 SE passenger side airbag, $100
– RB25DE Neo Cylinder Head (machined, no cams, no cam caps) $150 plus shipping
zerothread?id=418112
May part out the block depending on what i get offered for the various parts.
fresh never run completely assembled. Sitting on engine stand at the moment at a shop.
R34 RB25DET Block
.40 Over Bore, Line Honed, Deck Re-surfaced & Micropolished
R33 RB26DETT Crank, longer Crank Collar
R33 RB26DETT Rods, Micro-polished
CP 87mm RB26DETT Pistons, 8.5:1 Compression, CP Piston Rings
ARP Rod, Main, Head Bolts
ACL Race Rod & Main Bearings
Tomei Oil Restrictors
here are the specs for the bottom end:
Cylinder Bore Size 87
Piston Stroke Length 73.7
Head Gasket Bore Diameter 88
Piston Deck Clearance Negative If ABOVE Deck (Use '-') : -0.5715
Make me an offer, something reasonable. no loballers. lots of time and money went into this build. also have the following parts but they're used:
-oem water pump
-oem oil pump
-oem tensioner & idler pully
-oem rb25 rwd oil pan in great shape
ill let the built block go for $1600 OBO. really. best offer.
thx-J