FITMENT DATABASE - Post your wheel setup! (no pics with specs = deleted)

Forum for Nissan wheel fitment, tire selection, suspension setup and brake discussions.
User avatar
S13Teddy
Posts: 5138
Joined: Mon Apr 30, 2007 4:53 pm
Car: R32 Skyline, S13
Contact:

Post



1989 Nissan 240sx Coupe

Sportmax 501 16X8 +15 front and rearMegan Track Series Coilovers w/ camberplatesNo other suspension modsDunlop Direzza 195/50/16Front and rear fenders are both rolledClears coilovers fine, no rubbing eitherDon't know if it will clear Z brakes













User avatar
skydragoness
Posts: 9395
Joined: Wed Jul 24, 2002 6:49 am
Car: 03' 350z Touring 6spd
92' 240sx 60k survivor :)
Location: North DFW, TEJAS
Contact:

Post

SSR Integral A2 (uber rare, good luck finding 'em )

--16x7+32 front--16x8+38 rear--Spoke design is huge, clears Z32 26mm calipers w/ plenty of room. 30mm should also be fine.--225/50/16 all around w/ KYB AGX+Suspension Technique springs. --No rubbing/touching. --Tires shown: Yokohama ADVAN S4




User avatar
ArticDragon192
Posts: 2767
Joined: Fri Sep 10, 2004 5:35 pm
Car: 91 Z32 2+2

Post

- Volks Racing- Diameter : 17s- Width : 10J- Offset : +15- Clears coilovers and brakes- tensions rods, toe rods in the rear- fenders are rolled and have a newspaper pull all around- 245/40-17 all around- Alignment: Camber : -3° all around Toe : 0 toe all around Caster : 10.5 (Needed to clear AICV in rear of fenderwell)- NO rubbing at all

Pics:

inqui-Z-tor
Posts: 56
Joined: Wed Jan 24, 2007 3:08 pm
Car: 84Z31, 05A08

Post

Nice idea for a thread .. but it really should be organized by car/model.

Here is my contribution .. for 84-89 Nissan (300ZX) Z31 ONLY

http://wheelshow.redz31.com/


User avatar
usdm_180sx
Posts: 744
Joined: Sun Dec 21, 2003 5:50 am
Car: 1993 base model 240sx (s13)
Contact:

Post

No way I can't believe I missed this!

- Work Equip- 17 - 9 and 10- +16 and +18- High disk, clears z brakes and coilovers- Tein Flex, SPL t/c rods (front) SPL RUCAs and Toe links (rear)- fender modifications? Rolled and mild pull in rear (5mm)- 215/45 and 235/40- Custom made by RB Motoring


User avatar
rbsileighty
Posts: 1694
Joined: Sun Feb 09, 2003 8:10 am
Car: 92 S13 Hatch w/ RB20 & 05 Audi S4 Avant 6MT

Post

- Wheel Brand: Volk CE28N

- Diameter: 17"

- Width: F 9 / R 9.5

- Offsets: F +15 / R +22

- Brakes: Stoptech 13" kit (which does fit 17's... reply to above post)

- Suspension modifications: Cage, Hicas Swaybars, Hicas elim, Kei Office XT coilovers, Tein Tierods and Ends

- Fender modifications: Highly rolled and pulled front and front w/ no fender liner up front due to ride height

- Tire Sizes: because they were free 235F/245R... going bigger when I finish with these

- Any other relevant info: don't be afraid to roll/pull your fenders... just take your time and use a proper roller...



And... it was just for fun17x10 +12 on the rear w/ 245 tire

User avatar
blues14
Posts: 450
Joined: Tue Apr 19, 2005 2:16 pm
Car: 1995 Nissan 240SX GTS-t
Contact:

Post

18"x8" F/R+30 f/rNissan oem 350z touringtires 225/45r18 front 245/45r18 rear Tokico blues with espiler ASD springs no fender mod clears big breaks(r32)My s14


fuse=--action
Posts: 104
Joined: Mon Jan 21, 2008 9:17 pm
Car: '91 240sx

Post

Nissan base model 350z "Enthusiasts" wheels, staggered stance17x7.5 +3017x8.0 +33

BF Goodrich G-force Super Sports up front225 45 17

Potenzas in the rear (they came with the wheels, and will be changed to match the fronts soon enough)235 50 17

Clears Z-brakes with ease.Fits flush, no spacers, no rolling/pulling.Had to get shorter sidewalls up front because they loooked like truck tires and because they barely clear the stock suspension.





-fuse.

User avatar
Cameron
Posts: 2809
Joined: Sun Jun 03, 2007 8:15 pm
Car: a 240

Post

- SSR Vienna Kreis- 18- 9J F 9.5J R- +24 F +18 R- Clears Coilovers w/ 5mm spacer Front, Doubt it will clear Z brakes, cause as it sets right now at +24 F it rubs on the Caliper...- Suspension modifications in pics are just stock struts with Cut Springs, i Got Coilovers on there now. Will Change Pics when I take some.- Rolled Fender Lips for it to Fit, Will Be adding a More Aggressive Roll To Rear when i Add 15mm Spacers all round.- 215/45/18 All round- Soon Spacing will have +15 added all round for +9 F +3 R.














Blacky Chan
Posts: 35
Joined: Sun Apr 01, 2007 11:13 am
Car: 93 pug hatch

Post

sportmax 002's 16x8 +/- 0nexxan 205/50/16'skts coilovers (clears them)courtesy nissan rucaswickid tunning tension rodsroll on front and back but it really doesnt matter

User avatar
Touge noob S13
Posts: 275
Joined: Mon Sep 03, 2007 9:42 am
Car: 1991 240SX coupe

Post

- Wheel Brand: Autobahn- Diameter: 15- Width: 7- Offsets: +10- Like most old school meshies, they will not clear Z brakes unless you used spacers- Suspension modifications: Eibach Sportlines with Tokico blues- No fender modifications- 205/55/15-Front 205/60/15-Rear

ashibah83
Posts: 1362
Joined: Sat Oct 14, 2006 5:35 pm
Car: 93 SUPA BLACK COUPE

Post

- Wheel Brand: Rota d2- Diameter: 17- Width: 8.5- Offsets: +20- not sure about Z brakes, although it lookslike the willclear with ease- Suspension modifications: Stance GR+ coilovers, Full Battle Version Arms- No fender modifications, but if i wanna go lower i may need a roll- 215/45/17-Front and Rear


User avatar
sviellvoicae
Posts: 519
Joined: Fri Mar 02, 2007 8:36 pm
Car: 1992 sil-40

Post

17" 5zigen typhoons +43 all around with 50mm spacers. Tires are Falken Azenis 225.45.17









all pics are the same car. The silvia front with chargspeed kit is how i bought it, so i sold all that and i am now changing to what i want. here is the begining to what i am doing

just ordered thesehttp://cgi.ebay.com/ebaymotors...7.m32

http://www.origin-lab.com/inde...l=180

and the 30mmhttp://www.origin-lab.com/inde...b=180

will post when all is done

User avatar
kornaz
Posts: 2211
Joined: Thu Nov 10, 2005 3:44 pm
Car: 95 240sx SE.
Location: Sahara

Post

- SSR Professor SP1- 18- 10" all around- + 16 F with 8mm spacer (will be +9 soon), +24 R with no spacers (will be ? soon).- Dunno bout the Z brakes, but with spacers up front clears Q45 brakes with some room. Front doesn't clear coilovers without spacers. Running 8mm right now, need 10mm to have about 2.5 - 3 mm clearance. Rears clear.- Megan track coilovers, running max front camber, dunno rear. Camber not adjusted, but when i go 15mm up front, i'll rpolly be 1.5 - 2 neg camber front, and prolly same on rear with spacers, or mad pull. - All fenders rolled. Rear's pulled like 2 - 3 mm.- 225/40 all around.


alex4
Posts: 88
Joined: Mon Jul 09, 2007 8:27 pm
Car: 89 coupe, 87 supra

Post

- Motegi Traklite Anthracite with Machined Lip- 15x6.5- +35 offset- No way in hell it clears Z brakes. It's a 15 inch wheel.- No suspension mods, but I think they will look even better with a little drop.- Tires: 195/60R15 Cooper Lifeliner


User avatar
IanS
Posts: 10090
Joined: Thu Dec 23, 2004 3:07 pm
Car: 2002 Subaru WRX, 2010 Subaru Forester XT, 2004 Infiniti G35 Coupe.
Location: Esko, MN
Contact:

Post

Rota Grid OffroadsDiameter: 16"Width: 8"Offset: +10 front and rearDoes NOT clear Z brakes. Clears coils fine.All control arms are stock.Fender roll required front and rear for my tire size.225 50 16 Falcon Azenis RT-615s front and rear.

My camber settings as pictured are -2.6 degrees on each front wheel, and -2.5 degrees on each rear wheel. The fenders will need pulling if you want to run less camber. Im thinking about adding some 10 mm spacers to the rear to push them out slightly further.







/edited, better pictures added/
Modified by FlatBlackIan at 12:41 AM 7/6/2008

slik_s13
Posts: 378
Joined: Thu Mar 23, 2006 7:21 am
Car: 1990 nissan 240sx hatch back

Post

- Wheel Brand- gramlights 57 maximum flat black- Diameter- 17- Width- 9- Offsets- +12- Does it clear z brakes and coilovers- i dont have z brakes, so dont know.i do have kts coilovers and it clears them just fine.- Suspension modifications- i went as low as i could get the coilovers togo with out giving it a really rough ride, still pretty rough but not rough enough for me. what i did was take out two collars from the coilovers. running stock sus arms for now adjusted them as much as possible so that way im not runnin so much camber, a big difference that made really need to get the arms ASAP.-What fender modifications- i did a slight roll in the front and the back was a little more of a roll. also folded the the inner seem in the front fender wells that the tires always rubb on(right by the coilover). tucked my harness so theres no rubbage there- Tire Sizes- 215/40 all around- Any other relevant info. noneon to the picsstill need to paint itcant really see the wjeel to well in this one.

danielsan
Posts: 349
Joined: Tue Apr 08, 2008 7:41 pm
Car: 1991 240sx coupe SE

Post

- Datsun 280z turbo wheels- Diameter - 15"- Width - 6"- Offsets - +10mm- stock suspension- running 195/60/15


Modified by danielsan at 9:28 PM 7/2/2008

User avatar
-RJ-
Posts: 2469
Joined: Wed Aug 09, 2006 4:26 am
Car: S13 Convertible, 99 Frontier, 03 Sportage, 96 Protege
Location: Virginia Beach

Post

-Z32 OEM non-turbo rims painted gold-225/50/16-+45 Offset-Not sure about the Z32 brakes, but I am pretty they will fit. (I hope so because i plan on putting them on)-Megan Street Coilovers-The front wheels rubbed on the coilovers so i got 30mm spacers and they clear fine, the fenders just need to be rolled


User avatar
drifter92
Posts: 160
Joined: Mon Feb 11, 2008 2:29 pm
Car: 1995 Nissan 240sx Small BLock Chevy V8 5.4L
1990 Nissan 240sx Coupe SOHC Auto Wrecked Project Car
Location: Victoria, Tx

Post

- Sportmax 962's- 18"- 8.5"F 9.5"R- +42 F +35R- All clear- Stock old suspension- Stock fenders but i need to roll the back for hard bumps- 225/40/18 Front 245/40/18 Rear- No spacers


User avatar
jibe
Posts: 20
Joined: Wed Apr 18, 2007 7:16 am
Car: RS13 RB26 big singled

Post

ZG flaresSportmax 002 15X8 ET0 F and R5mm spacers on front (no front spacer on pics)35mm spacers at the rears205/55/15 F225/50/15 R


User avatar
smurf13
Posts: 508
Joined: Sat Jun 09, 2007 8:55 am
Car: 1992 240sx "fatback"

Post

elite17 F&R9j F&R+15 F&Rclears coiloversmegan street coilovers and RUCA's225/45's F&Rrolled fenders

3.5 degrees of camber with 0 toe F&R




92SR20S13
Posts: 381
Joined: Tue Mar 13, 2007 5:34 pm
Car: sr20det-s13

Post

- Vesta Eins Kahn.5- 18"- 8"Fronts 9"Rears- +35 Fronts +38 Rears-215/35R18 Fronts 245/40r18 Rears- Gab struts with RSR springs-Dont have Z brakes on yet but will install coilovers and brakes with 25MM spacer up front and 15MM in the rear.


mrdicks95se
Posts: 20
Joined: Sun Nov 23, 2008 10:58 am

Post

Work Euroline DH18x8 +36 (7mm spacer = +23 effective) 18x9 +38 (25mm spacer = +13 effective)225/40-18 front and rearTokico Illumina/GC, oe spec camber and toeRear fender rollNot sure on z32 caliper clearance

mrdicks95se
Posts: 20
Joined: Sun Nov 23, 2008 10:58 am

Post

Tenzo Type M19x8.5 +1719x10 +22215/35-19 front245/35-19 rearIllumina/GC, oe spec camber/toeRear fender roll req'dClears z32 and any other caliper. i'm currently running z32 calipers with 13.1" cobra rotors.


User avatar
esahuque
Posts: 372
Joined: Sat Oct 09, 2004 11:17 am
Car: 95 240sx KA-T, 04 frontier

Post

- Motegi Touge- Diameter-17" - Width-9"- offset-+24 all the way around (5mm spacers makes +19)- clears coil overs, N\A on Z breaks- Coilovers, RUCA's, rear toe arms, front camber plates- rolled F\R slight pull in rear- 225/45/17












Modified by esahuque at 8:27 AM 2/28/2009

User avatar
SketchyRollin564
Posts: 3907
Joined: Sat Mar 24, 2007 4:06 pm
Car: SR hatchback in the werks

Post

-z32 TT wheels on s14-Rears: 245/50/16 on 8.5" wide wheel, not sure on offset, i think its +35-Fronts: 225/50/16 on 7.5" wide wheel, +45 offset-Front tires rub the strut a tiny bit, but i just used these little washers as spacers, and its fine now, so 5mm spacer will easyly fix problem-Stock struts, Tein lowering springs-Not sure on clearing Z brakes without spacer


User avatar
esahuque
Posts: 372
Joined: Sat Oct 09, 2004 11:17 am
Car: 95 240sx KA-T, 04 frontier

Post

::: update from previous post :::

- Motegi Touge- Diameter-17" - Width-9"- offset-+24 all the way around (15mm spacers up front makes +9) (20mm spacers on rear makes +4)- clears coil overs, N\A on Z breaks- Coilovers, RUCA's, rear toe arms, front camber plates- rolled F\R hard pull in rear- 225/45/17






User avatar
Gabes13
Posts: 2385
Joined: Mon Mar 17, 2008 11:59 am
Car: rb20det s13
Location: St. Pete, Fl.

Post

- Brand: Sportmax/xxr 962- Diameter: 17" - Width: 9"- Offset: +35 (25mm spacers front and back, so +10 respectively) - Don't have Z brakes so don't know- PBM coilovers, rucas, tension rods and tie rods - All fenders rolled ONLY- 215/45/17 all around

camber:-2 deg. front -3.75 deg. back


Modified by pandapants at 9:03 AM 1/18/2010

User avatar
2_Liter_Turbo
Posts: 2980
Joined: Sat Jan 24, 2004 10:41 am
Car: _________________
'96 S14 Coupe: SR20VET
'90 R32 TH1 GTR: RB26DETT
'92 S13 Fastback: SR20DET
'11 V36 Sedan: VQ25HR
'06 GMT800 2500HD: LBZ Duramax
Location: DFW, Texas
Contact:

Post

- 5Zigen Typhoons- 17"- 8" Front / 9" Rear- +27 Front / +35 Rear- Clears Z Brakes (No Idea on Coils, but most likely. There is plenty of room!)- Eibach Springs on Tokico Struts- Slight Fender roll, but did not have to do with these wheels- 225/45/17 Front / 275/40/17 Rear

- The front tires are way too skinny. I'll be trying a set of 245/40/17 (the ones that came off of the rear wheels when I put on the 275's). All the pics are with the 245's on the rear except the last 2. I just got the 275's on today!









The 275's! Much better than the stretched look in my opinion...










Modified by ElNegro at 7:51 PM 4/8/2009


Return to “Nissan Tires, Wheels, Brakes and Suspension”