engine squeeling after swap back in

Discuss topics related to the CA18DE and CA18DET series engines.
User avatar
jt15833
Posts: 984
Joined: Sat Jul 09, 2005 3:12 pm
Car: 95' 240SX
Location: Georgia

Post

i took my motor out to replace the oil pump and after putting the motor back into the car it squeels pretty badly. only accesory belt on right now is the waterpump and alternator belt. im leaning that its a belt but maybe something else. any ideas?


User avatar
Loofee95SE
Posts: 277
Joined: Thu Oct 17, 2002 12:13 pm
Car: u gota sister??
Contact:

Post

does it sound like beltS????

slownslurious
Posts: 1533
Joined: Wed Jun 01, 2005 1:28 pm

Post

check belt deflection, if its loose, tighten. If it doesnt' deflect at least a half inch or so, its too tight and its probably your bearings in the alt squealing and it will burn it up if you don't loosen it.If neither of those help, spray some belt dressing, if it goes away its belts, if it doesn't its something else. also helps to put your ear to the end of a piece of pipe, you will be able to localize the squeal.


Return to “CA18DE / CA18DET Forum”